提供德國KNF隔膜真空泵技術參數,希望能幫到大家!HINTS ON FUNCTION, INSTALLATION AND SERVICE
FUNCTION OF KNF DIAPHRAGM
VACUUM PUMPS AND COM-
PRESSORS
An elastic diaphragm is moved up and
down by an eccentric (see illustration).
On the down-stroke it draws the air or
gas being handled through the inlet valve.
On the up-stroke the diaphragm forces
the medium through the exhaust valve
and out of the head. The compression
chamber is hermetically separated from
the drive mechanism by the diaphragm.
The pumps transfer, evacuate and com-
press compley oil-free.
Diaphragm pump
HINTS ON INSTALLATION AND
OPERATION
• Range of use: Transferring air and gases
at temperatures between +5°C and
+40°C
• Please check the compatibility of the
materials of the pump head, diaphragm
and valves with the medium.
• The KNF product line contains pumps
suitable for pumping aggressive gases
and vapours - please contact us.
• Permissible ambient temperature:
between +5°C and +40°C
• The standard pumps are not suitable
for use in areas where there is a risk
of explosion. In these cases there are
other products in the KNF program -
please ask us for details
• The pumps are not designed to start
against pressure or vacuum; when a
pump is switched on the pressure in
the suction and pressure lines must be
atmospheric. Pumps that start against
pressure or vacuum are available on
request
• To prevent the maximum operating
pressure being exceeded, restriction or
regulation of the air flow should only
be carried out in the suction line
• Components connected to the pump
must be designed to withstand the
pneumatic performance of the pump
• Install the pump so that the fan can
draw in sufficient cooling air
• Fit the pump at the highest point in the
system, so that condensate cannot
collect in the head of the pump - that
prolongs working-life.
HINTS ON SERVICE
The diaphragm and valve plates are the
only parts of the KNF diaphragm pumps
subject to wear. They are easy to change,
as no special tools are needed.
If you have any questions, please call our
application engineers (see below for
contact ephone number).
德國KNF隔膜真空泵參數明細:標準大氣壓(l/min) (mbar absolute) (bar g)
7.5 ≥140 ≤1.5 單泵頭 抗化學腐蝕 N 87 TTE Ex
≤13 ≥53 ≤1.5 單泵頭 抗化學腐蝕 N 726 FTE Ex
≤13 ≥125 ≤1.5 單泵頭 抗化學腐蝕 N 726 FT.29E Ex
≤15 ≥100 ≤2.5 單泵頭 N 026 AT/ST.9E
≤26 ≥100 ≤2 雙泵頭 N 026.1.2 AT/ST.9E
≤27 ≥100 ≤4 單泵頭 N 143 AT/ST.9E
≤48 ≥100 ≤4 雙泵頭 N 186.1.2 AT/ST.9E
≤120 ≥115 ≤1 單泵頭 N 0150 AT/ST.9EKNFM43EX NR:02654392
KNFZ2S16-3X/S
KNFType:PM21665-86 Nr:2.04771874
KNFN87TTE-EX
KNFN023.3ANE 23521 230V/50HZ IP20
KNFType:N860FTE Nr.:03254628
KNFType:N026AN9E VAC230 HZ:50
KNFN86KNDCB
KNFN86KT.18 Nr:2.02327
KNFN86 KN18
KNFPM18831-86 230V 50HZ 0.4
KNFPos*: E Locking ring
KNFN813.4ANDCB 見規格描述
KNFPM22100-87 Bj:07/2008 A:0.6pma
KNFN84.4ANDCB 見規格描述
KNFPL5402-NFB 30
KNFN87TTEX
KNFN86KTE
KNFPNM_0076-1 應為ARELCO-0050
KNFN145 SVE
KNFN86KTE
本公司主要做歐美品牌,我們在德國有公司,可以采購歐洲任何國家的品牌.我們在美國也有公司,比如美國的ASCO阿斯卡,VICKERS威格士,MAC,PARKER派克,MOOG穆格,FAIRCHILD仙童,DENISON丹尼遜,ROSS,UE,MTS,GEFRAN杰夫倫,冬斯DUNGS,REXROTH力士樂,意大利ATOS阿托斯,寶德BURKERE,哈威HAVE,費斯托FESTO,庫伯勒KUBLER,施邁賽SCHMERSAL,巴魯夫BALLUFF,德國E+H,SICK,德國P+F,易福門IFM,海隆,諾冠,Buschjost,邦納BANNER,寶麗聲Polysonics,AFRISO,KRAL,YSI,DEPA,TURCK,等,大概200多個品牌有合作。價格實惠,貨期快,質保原裝,詢!壹捌零零貳柒柒零叁零伍。有其它陌生品牌也可以找我詢價!
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。