首頁 >> 供求商機
實驗室熱壓成型機是制備具有可再重復特性樣品的重要工具。壓板表面的溫度分布均勻，保證樣品厚度恒定的機械堅固性和—致的閉合力是保證這—結果的基本因素。
主要特點
．配有4列（直徑60毫米）的機械結構和由自潤滑襯套驅動的滑動壓板
．厚度為40毫米的250x250毫米鍍鉻鋼壓板
．專門設計的平面加熱元件，以確保壓板表面溫度分布均勻
．封閉成型區，便于煙霧抽吸
．配有安全鎖的防護門
．CE標簽附件
．配有觸摸屏顯示器的自動壓力控制：允許設置成型循環
．冷卻系統：控制壓板的冷卻以模制熱塑性產品
．閉合力控制：允許在成型循環的每—步連續調節閉合力。
．Press—Control軟件：允許記錄和存儲每個成型循環的成型條件
．根據標準生產板材和不同類型樣品的模具
Max useable platen surface: 250 mm x 250 mm
Max closure force: 25 Tons
Temperatures: Up to 250°C (300°C optional). 0.1°C Resolution
Touch Screen PLC controller (optional): PLC with touch-screen display. Permits to:; - set
displacements of the moving plate; - set the tempera- tures.; - activate the cooling and cooling rate (with cooling option); - set closure force (with force regulation option)
Closure Force Regulator (optional): Special hydraulic setup for conti- nuous regulation of the
closure force. Adjustable closure force between 6 and 250kN. Regulation error <10%.
Platen cooling (optional): Press Platens with water cooling circuit; The control of the cooling and of the cooling rate is controlled by the PLC controller; The connection to a water source or a Chiller is required (fittings 1/4 )
5