| Application | hygienic systems |
| Installation | freely rotatable housing 350° |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -25...125; (145 max. 1h) |
| Pressure rating | |
| Min. bursting pressure | |
| Type of pressure | relative pressure |
| No dead space | yes |
| Electrical data |
|---|
| Operating voltage [V] | 18...32 DC |
| Current consumption [mA] | < 50 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 0.5 |
| Integrated watchdog | yes |
| Inputs / outputs |
|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 1 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 6 |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4...20, invertible; (scalable 1:4) |
| Max. load [Ω] | (Ub - 10 V) / 20 mA |
| Analogue voltage output [V] | 0...10, invertible; (scalable 1:4) |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Measuring/setting range |
|---|
| Measuring range | | -1...10 bar | -14.5...145 psi | -0.1...1 MPa | |
| Set point SP | | -0.98...10 bar | -14.2...145 psi | -0.098...1 MPa | |
| Reset point rP | | -1...9.98 bar | -14.5...144.7 psi | -0.1...0.998 MPa | |
| Analogue start point | | -1...7.25 bar | -14.5...105.1 psi | -0.1...0.725 MPa | |
| Analogue end point | | 1.75...10 bar | 25.4...145 psi | 0.175...1 MPa | |
| In steps of | |
| Factory setting | | | SP1 = 2.50 bar | rP1 = 2.30 bar | | | ASP = 0.00 bar | AEP = 10.00 bar | |
| Accuracy / deviations |
|---|
| Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,05; (0...70 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,15; (0...70 °C) |
| Response times |
|---|
| Response time [ms] | < 100 |
| Damping for the switching output dAP [s] | 0.1...100 |
| Damping for the analogue output dAA [s] | 0.1...100 |
| Step response time analogue output [ms] | 25 |
