TCP202電流探頭美國泰克Tektronix
Easy Current Measurements
Probe Connects Directly to TDS Scope through TEKPROBE™ BNC Interface
Split Core Construction for Easy Circuit Connection
DC to 50 MHz Bandwidth

TCP202電流探頭美國泰克Tektronix

購買須知：

1.請您先確定產品的具體型號。

2.如果不確定型號，可以參考我們頁面上提供的詳細介紹或者直接咨詢我們。

3.網頁上的價格僅作參考，準確價格請電聯我司。

4.貨期方面請與我司，因為不同產品的貨期是不一樣的。

5.同一產品不同時間的價格與貨期也是不一樣的

6.其他的具體相關事宜，請。

7.謝謝您的光臨！                                                                   

Features & Benefits

Easy Current Measurements
Probe Connects Directly to TDS Scope through TEKPROBE™ BNC Interface
Split Core Construction for Easy Circuit Connection
DC to 50 MHz Bandwidth
15 Amps DC + Peak AC Current
50 Amps Peak Pulse Current
500 × 10-6 Ampere-Sec Product
Safety Certified
Applications

TCP202電流探頭美國泰克Tektronix

Motor Drives
Switching Power Supplies
Disk Drive
Electronic Ballasts
Inverters
Avionics
TCP202 DC Coupled Current Probe

When combined with a Tektronix TDS oscilloscope, the TCP202 enables users to make direct readout DC and AC current measurements, resulting in accuray displayed and recorded measurements.

The TCP202 is a general-purpose probe for displaying and measuring current in electronic circuits. It is ideal for power supply and motor drive design, and for device testing.

Recommended Oscilloscopes

All TDS3000C and TDS5000B Series oscilloscopes. Also operational with TDS500, TDS600, and TDS700 Series, recommended with use of calibration fixture (015-0672-50) for best accuracy.

For TCP202 operation with other TDS400, TDS500, TDS600, and TDS700 Series oscilloscopes, the scale factor will be correct but measurement will be indicated as V instead of A.

Increase the Accuracy of Your Current Measurements

 

The accuracy of the TCP202 AC/DC current probe is normally 3%. However, the accuracy may be improved to 1% when the probe is calibrated on certain TDS oscilloscope models using the optional Calibrator P/N 015-0672-50. This improved accuracy is available on the TDS500, TDS600, and TDS700 Series, however the optional calibrator is only functional with the TDS500, TDS600, or TDS700 Series oscilloscope calibrator pins. The calibration fixture is not required for TDS3000C and TDS5000B Series oscilloscopes.