In an oscillation shear experiment, the material is subjected to either a sinusoidal strain or stress and the corresponding response is measured. The ratio of the output and input signals is referred to as the transfer function or material function (Figure 1). When a sinusoidal deformation or deformation rate is applied, the material’s response is the stress. The resulting material function is either the modulus or the viscosity; if a stress is applied and the strain measured, the material function is the compliance.
提供商 |
TA儀器 | 下載次數 |
268次 |
資料大小 |
1.4MB | 資料類型 |
PDF 文件 |
資料圖片 |
-- | 瀏覽次數 |
340次 |
立即詢價
您提交后,專屬客服將第一時間為您服務