 |
北京賽斯維測控技術有限公司
主營產品： 壓力傳感器,加速度傳感器,振動傳感器,氣壓傳感器,位移傳感器 |
聯系電話
18610087636
公司信息
- 聯系人：
- 劉敏
- 電話：
- 01084775646/8
- 手機：
- 18610087636
- 傳真：
- 01058949029
- 地址：
- 北京望京西路甲50號卷石天地大廈B座1001
- 郵編：
- 100102
- 網址：
- www.sensorway.cn
| 參考價 | 面議 |
- 型號
- 品牌
- 廠商性質 代理商
- 所在地 北京市
更新時間：2017-12-15 23:46:56瀏覽次數：575
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
產品說明：
FDT壓電薄膜傳感器:The “F” in FDT Series stands for ‘Flexible Leads’. These are rectangle elements ofpiezo film with silver ink screen printed electrodes. Rather than making the leadattachment near the sensor, the piezo polymer tail extends from the active sensor areaasflexcircuitmaterial with offset traces. This gives a very flat, flexible lead, with a connector at the end. The FDT elements are available in a variety of different sizes and thicknesses.Theyareavailable without a laminate （FDT）, with a laminated （0.005” mylar） on one side （FLDT） or with tape release layer adhesive （FDT with adh） in the sensor area. The connector pinsontheFDTsensors can be directly soldered to a PCB with a reasonable level of care. This component cannot withstand high temperatures （> 80°C）, and therefore coldering of the pins to a PCB must be done quickly. A heatsink clamped to the interface area between the film and the crimps will take the heat away from the film. Pre-tin the pins and then quickly solder them totheboard. Do not allow the soldering iron to touch the film, and do not use a dwelltimeofover5seconds on the pins. Low temperature solder can also be used.
所屬品牌： MEAS
輸出： 0～5V
量程： -
封裝：薄膜元件
工作溫度范圍： 0～70℃
精確度：-
供電電源：無源
特點：無源，安裝方便
類型：壓電薄膜傳感器
電氣連接：電纜連接
典型應用： 傳感區與引出點需要一定距離而又不便于用導線的場合
資料下載：http://www.sensorway.cn/sensors/119.html
