| GDS-2062數字示波器的詳細介紹 | - 60MHz 頻寬
- 2輸入通道
- 1GSa/s 即時取樣率以及 25GSa/s 等效取樣率
- 25000點之記憶體長度
- 5.6 吋 TFT 彩色 LCD 熒幕
- 支援USB HOST/DEVICE：可使用USB隨身碟及 USB 印表機
- 支援AC/DC電源操作模式（選購）
|
|  規格 |
| VERTICAL | | Channels | 2 | | Bandwidth | DC ~ 60MHz （-3dB） | | Rise Time | 5.8ns Approx. | | Sensitivity | 2mV/div ~ 5V/div （1-2-5 increments） | Accuracy
| ∮（3% x |Readout|+0.05 div x Volts/div+0.8mV） | | Input Coupling | AC, DC & Ground | Input Impedance
| 1M∮2%, ~16pF | | Polarity | Normal & Invert | Maximum Input
| 300V （DC+AC peak）, CATII | | Waveform Signal Process | + , - , FFT | Offset Range
| 2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V | | Bandwidth Limit | 20MHz （-3dB） | | TRIGGER | | Sources | CH1 , CH2 , Line , EXT | Modes
| Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay, Event-delay | | Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | | Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 60MHz : Approx. 1div or 10mV | | EXT TRIGGER | | Range | 15V | | Sensitivity | DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV | | Input Impedance | 1M∮2% , ~ 16pF | | Maximum Input | 300V （DC AC peak） , CATII | | HORIZONTAL | | Range | 1ns/div ~ 10s/div （1-2-5 increments）; ROLL : 250ms/div ~ 10s/div | | Modes | MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y | | Accuracy | ∮0.01% | | Pre-Trigger | 20 div maximum | | Post-Trigger | 1000 div | | X-Y MODE | | X-Axis Input | Channel 1 | Y-Axis Input
| Channel 2 | | Phase Shift | ∮3 at 100kHz | | SIGNAL ACQUISITION
| | Real-Time Sample Rate | 1GSa/s maximum | | Equivalent Sample Rate | 25GSa/s maximum | | Vertical Resolution | 8 Bits | | Record Length | 25K Dots maximum | Acquisition Mode
| Normal, Peak Detect, Average | Peak Detection
| 10ns | Average
| 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 | | CURSORS AND MEASUREMENT | | Voltage Measurement | Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot | | Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , NegativeWidth , Duty Cycle | Delay Measurement
| Eight different delay measurement | | Cursors Measurement | Voltage difference between cursors （V） Time difference between cursors （T） | Auto Counter
| Resolution : 6 digits
Accuracy : ∮2%
Signal Source: All available trigger source except the Video trigger mode | | CONTROL PANEL FUNCTION
| | Autoset | Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically | | Save Setup | Up to 20 sets of measurement conditions | Save Waveform
| 24 sets of waveform | | DISPLAY
| | TFT LCD Type | 5.6 inch | Display Resolution
| 234 （Vertically） x 320 （Horizontally） Dots | Display Graticule
| 8 x 10 divisions ; 8 x 12 divisions （menu off） | Display Brightness
| Adjustable | | INTERFACE
| | Go/NoGo Output | 5V Maximum/10mA TTL Open Collector Output | | RS-232 Interface | DB 9-pin male DTE RS-232 interface | | GPIB Interface （Option） | Fully programmable with IEEE 488.2 compliance | | USB | USB Host/Device 2.0 full speed supported | | POWER SOURCE
| Line Voltage Range
| AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection | Battery Power（Option）
| Battery : 11.1V Li-Ion battery pack
Charge Time : 8 hours （Power ON）
Operating Time : 3 hours , depending on operating condition | | MISCELLANEOUS
| | Multi-Language Menu | Available | | Online Help | Available | | Time Clock | Time and Date, Provide the Date/Time for saved data | | DIMENSIONS &WEIGHT | 254D x 142H x 310W（mm）
Approx. 4.3kg | |
|
| 選購配件 |
| | |
QQ交談
