安捷倫原子吸收AA配件
具體成交價以合同協議為準
- 公司名稱 哈爾濱君冰淑科技有限公司
- 品牌 Agilent/安捷倫
- 型號
- 產地
- 廠商性質 經銷商
- 更新時間 2015/9/2 14:21:06
- 訪問次數 2135
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
安捷倫原子吸收AA配件
| 5180-4169 | O-Ring 12/PK, Fluoroelastomer, 0.176inID |
| 5181-1246 | Dissolution filter, 1/8in probe, 1000/pk |
| 5181-3311 | Washer, spring 10/PK |
| 5181-3389 | Outlet splitter |
| 5181-3390 | Fixed inlet splitter 0.22mm id |
| 5181-3391 | Fixed inlet splitter 0.32mm id |
| 5181-3392 | Fixed inlet splitter 0.53mm id |
| 5181-3393 | Variable outlet |
| 5181-8837 | Packed injection port kit |
| 5181-8863 | Source cleaning kit |
| 5182-0746 | Conversion Kit to use 3/4" (150mm) tube |
| 5182-0772 | Heat assembly, trap |
| 5182-0773 | Stainless steel trap, BTEX |
| 5182-0774 | Trap, BOCARB 4000 |
| 5182-0775 | Trap, VOCARB 3000 |
| 5182-0778 | Trap, OV-1/Tenax/Silica/Gel |
| 5182-0779 | Trap, OV-1/Tenax/Silica Gel/Charcoal |
| 5182-0780 | Trap, Tenax/Charcoal |
| 5182-0781 | Trap, Tenax/Silica Gel/Charcoal |
| 5182-0783 | Trap, Tenax |
| 5182-0788 | Needle, 7.75in for 5ml frit/fritlss sprg |
| 5182-0789 | Smpl Ndl for 25ml frit/fritless sparger |
| 5182-0792 | Female Luer connector for sample valve |
| 5182-0793 | Sample Valve, 3 port, assembly |
| 5182-0794 | 25ml Needle Sparger Kit |
| 5182-0795 | 5ml Needle Sparger Kit |
| 5182-0796 | 25ml Fritless Sparger Kit |
| 5182-0844 | 5ml Fritless Sparger Kit |
| 5182-0845 | 25ml Sparger Kit |
| 5182-0846 | 5ml Frit Sparger Kit |
| 5182-0847 | 25ml Needle Sparger |
| 5182-0848 | 5ml Needle Sparger (Glassware Only) |
| 5182-0849 | 25ml Fritless Sparger (Glassware Only) |
| 5182-0850 | 5ml Fritless Sparger (Glassware Only) |
| 5182-0851 | 25ml Frit Sparger (Glassware Only) |
| 5182-0852 | 5ml Frit Sparger (Glassware Only) |
| 5182-0893 | Sparger, fritted, 5ml, 3/4" (Glswr only) |
| 5182-0894 | Sparger,25ml,frit,3/4" (Glassware only) |
| 5182-0895 | Sparger,5ml,fritless,3/4" (Glswr only) |
| 5182-0896 | Sparger, 25ml, fritless, 3/4" Glassware |
| 5182-2581 | APG remote cable |
| 5182-3477 | TCD Back Ferrule for 1/8" inlet 10/PK |
| 5182-9652 | S/SL Gold Seal Disk with Cross |
| 5182-9673 | TCD Frnt Ferr for 0.53mm id col 10/PK |
| 5182-9676 | TCD Frnt Ferr for 0.32mm id col 10/PK |
| 5182-9677 | TCD Frnt Ferr for 0.25mm id col 10/PK |
| 5182-9679 | TCD Front Ferrule, no hole 10/PK |
| 5182-9722 | 6890 NPD Ceramic Insulator/Metal Seal KT |
| 5182-9747 | Service Kit for SLH |
| 5182-9748 | PTFE guide for SLH, 10/PK |
| 5182-9753 | Empty inserts with one swirl hole 10/PK |
| 5182-9754 | Graphpack-2M connector 0.2mm |
| 5182-9755 | PTV Septumless Head for 6890GC |
| 5182-9757 | VAlve body for SLH |
| 5182-9758 | Spring for SLH |
| 5182-9759 | Kalrez seal for SLH |
| 5182-9760 | Sealing element for SLH |
| 5182-9761 | Graphpack-2M connector 0.32/0.25mm |
| 5182-9762 | Graphpack-2M connector 0.53mm |
| 5182-9763 | Silver seal 5/PK |
| 5182-9773 | TV Gas Connection Kit |
| 5182-9775 | Viton Seal for SLH Septumless Head 5/PK |
| 5182-9788 | Pkd con Tube Tenax TA a-type 1arrow 36PK |
| 5182-9789 | Pkd con Tube Tenax TA b-type 2arrow 36PK |
| 5183-0362 | Declaration of Conformity |
| 5183-2096 | HP5973 w/Diffusion Pump 1 Yr Maint Kt |
| 5183-4649 | Crossover Ethertwist Cable, 10ft |
| 5183-4652 | MIcro GC Replacement Filters 5/PK |
| 5183-4735 | Sparger 25ml Frit for 3000/2000/7695 |
| 5183-4736 | Sparger 5ml Frit for 3000/2000/7695 |
| 5183-4737 | Sparger 5ml Fritless for 3000/2000/7695 |
| 5183-4738 | Sparger 25ml Fritless for 3000/2000/7695 |
| 5183-4745 | Interface Cbl 5890 to 7695/TMR-3100 P+T |
| 5183-4746 | Intf Cable 5890 MSD-7695/TMR-3100 P+T |
| 5184-3517 | GC/MS Checkout Standards Kit |
| 5188-1447 | Trap, U Shape Tenax Stamp 1A |
| 5188-1448 | Trap, U Shape VPH Stamp 11 |
| 5188-2790 | Trap, Tenax () |
| 5188-2791 | Trap,Tenax/Silica gel/char 12inx18in No3 |
| 5188-2792 | Trap, Tenax/charcoal, 12? x 1/8" (No.4) |
| 5188-2793 | Trap, OV-1/Tenax/Silica gel,12"x1/8"(6) |
| 5188-2794 | Trap,OV-1/Tenax/Sil gelchar,12"x1/8"(5) |
| 5188-2795 | Trap, VOCARB 3000 |
| 5188-2796 | Trap, VOCARB 4000 |
| 5188-2797 | Trap, BTEX |
| 5188-5241 | S/SL Insulation Kit, 3 Pieces |
| 5188-5244 | Response Linearity Standard, 3x1 mL amp |
| 5188-5245 | FPD Sample |
| 5188-5347 | OFN NCI Checkout standard 100 fg/uL |
| 5188-5348 | OFN EI Checkout standard 1 pg/uL |
| 5188-5357 | PFHT - HighMass Checkout Sample |
| 5188-5372 | FID MDL test sample 3x0.5 ml ampoules |
| 5188-5953 | FPD Check Out Sample, Meth. Parathion |
| 5188-6493 | QuickPick Split Inlet PM Kit |
| 5188-6494 | QuickPick Splitless Inlet PM Kit |
| 5188-6495 | Split vent trap PM kit,single cartridge |
| 5188-6496 | QuickPick Split Vent + Inlet PM Kit |
| 5188-6497 | QuickPick Splitless Inlet/Vent PM Kit |
| 5188-6498 | QuickPick Purged Packed Inlet PM Kit |
| 5188-6523 | Sulfa Drug LCMS OQPV Standards kit |
| 5188-6524 | PA tuning solution set |
| 5188-6525 | ICP-MS internal Std Mix |
| 5188-6526 | 6020 Interference Check Solution A 100ml |
| 5188-6527 | 6020 Interference Check Solution B 100ml |
| 5188-6529 | RRLC Check out sample, 1mL ampoule |
| 5188-8813 | Trap,BTEX + MTBE |
| 5188-8814 | Trap (No. 5),OV-1/Tenax/Silica Gel/Char |
| 5188-8815 | Trap (No. 8),Carbopak B/Carbosieve S-III |
| 5188-8816 | Trap (No. 9),Proprietary |
| 5188-8817 | Trap,Tenax/Silica Gel/Carbosieve S-III |
| 5188-8818 | Strat-Trap,Tenax/Silica Gel No. 2 |
| 5188-8819 | Strat-Trap,Tenax/Silica Gel/Charcoal No3 |
| 5188-8820 | Trap,VOCARB 3000 |
| 5188-8821 | Trap,VORCARB 4000 |
| 5188-8822 | Trap,BTEX |
| 5190-0123 | Electron Multiplier for 8800 ICP-MS/MS |
| 5190-0469 | LC TOF/QTOF/Q Pesticide Test Mix. |
| 5190-0482 | ASTM D6591-06 IP 548 Calib Std Lit 4x1ml |
| 5190-0483 | ASTM D6591-06 IP548/06 sys cal std 1,2 |
| 5190-0484 | EN12916/ IP 391 Calib.Sols A-D 4x 1ml |
| 5190-0485 | EN12916/ IP391 Sys Cal Std 1+2 2x 1ml |
| 5190-0489 | Nitrosamine Checkout Mix 10 ug/L in MeOH |
| 5190-0490 | Residual Solvent Revised Mthd467 Class 1 |
| 5190-0519 | RGA Checkout Sample with Oxygen |
| 5190-0521 | Greenhouse Gas Checkout Sample |
| 5190-0522 | Quinine Standard for FLD |
| 5190-0530 | Cell cleaning sol for UV/VIS 1L |
| 5190-0531 | IRM calibrant for GC/TOF 1 x 0.5mL |
| 5190-0551 | LC/MS Pesticide Comprehensive mix 8x 1mL |
| 5190-0553 | Vet drug checkoutmix 1mL |
| 5190-0556 | LC/MS forensic tox checkout mix |
| 5190-0557 | Tox comprehesive test submix 1 1mL |
| 5190-0558 | Tox comprehesive test submix 2 1mL |
| 5190-0559 | Tox comprehesive test submix 3 1mL |
| 5190-0560 | Tox comprehesive test submix 4 1mL |
| 5190-0561 | Tox comprehesive test submix 5 1mL |
| 5190-0562 | Tox comprehesive test submix 7 1mL |
| 5190-0563 | Tox comprehesive test submix 8 1mL |
| 5190-0565 | Tox comprehesive test submix 6 1mL |
| 5190-0569 | Vet Drug submix 1 1mL |
| 5190-0570 | Vet Drug submix 2 1mL |
| 5190-0571 | Vet Drug submix 3 1mL |
| 5190-0572 | Vet Drug submix 4 1mL |
| 5190-0573 | Vet Drug submix 5 1mL |
| 5190-0574 | Vet Drug submix 6 1mL |
| 5190-0575 | Vet Drug submix 7 1mL |
| 5190-0576 | Vet Drug submix 8 1mL |
| 5190-0577 | Vet Drug submix 9 1mL |
| 5190-0578 | Vet Drug submix 10 1mL |
| 5190-0580 | Entprise Edtn LCMS OQ/PV sulfa std 5x2mL |
| 5190-0591 | ESI Negative Ion Performance Std |
| 5190-0921 | Sapphire Window |
| 5190-1401 | Cleaning Powder,Dielectric Capillary |
| 5190-1441 | Pesticide Locking Standard 3 x 1ml |
| 5190-1445 | Strat-trap, OV-1/Tenax (No. 7) |
| 5190-1446 | Strat-trap, Tenax (No. 1) |
| 5190-2231 | 25 mL fritless Sparge Glssware Kit Atomx |
| 5190-2232 | 25 mL frit Sparge Glassware Kit, Atomx |
| 5190-2233 | Vessel, 15 mL Amber IS |
| 5190-2234 | Syringe, 27 mL with Side Port |
| 5190-2235 | Antifoam agent, Antifoam 1520, 10 mL |
| 5190-2265 | Sample loop, 1mL certified, deactivated |
| 5190-2266 | Sample loop, 3 mL certified, deactivated |
| 5190-3151 | Sample loop, 5 mL, PEEK AQUATek 100 |
| 5190-3152 | Sample loop, 25 mL, PEEK AQUATek 100 |
| 5190-3153 | Sample loop, 20 mL, PEEK AQUATek 100 |
| 5190-3154 | Sample loop, 10 mL, PEEK AQUATek 100 |
| 5190-6144 | Gold Seal, Ultra Inert, w/Washer |
| 5190-6145 | Gold Seal, Ultra Inert, w/Washer, 10/PK |
| 5190-6149 | Gold Seal, Ultra Inert, w/Washer, 50/PK |
| 5190-6166 | Vet drugs LC/MS standard submix 11 1x1ml |
| 5410029700 | Carousel disc, PSD 100 autosampler, 1/pk |
| 5410046300 | Disc carousel PSD 120, 130 samples, 1/pk |
| 5610121600 | Mercury source lamp, Liberty ICP, 1/pk. |
| 5982-0024 | Butanetriol Int Std Num.1 for Biodiesel |
| 5982-0025 | Tricaprin Int Std Number 2 for Biodiesel |
| 59987-20040 | Precision glass capillary,platinum ends |
| 6210092090 | Moulding Spraychamber Fluorinated |
| 6310001100 | Graphite tubes, plateau, coated, 10/pk |
| 6310001200 | Graphite tubes, partitioned, 10/pk |
| 6310001300 | Graphite pyrolytic platforms, 10/pk |
| 6310001600 | Graphite electrodes Deuterium GFAA, 1 Pr |
| 6310001700 | Graphite electrodes, Zeeman GFAA 1 Pair |
| 6310001800 | Graphite shroud Deuterium GFAA, 1/pk |
| 6310001900 | Graphite shroud, Zeeman GFAA 1/pk |
| 6310003100 | Graphite shroud for GTA 120, 1/pk |
| 6310003400 | Graphite electrodes for GTA 120, 1 pair |
| 6310003500 | Graphite electrodes GTA120 Zeeman 1 pair |
| 6310003600 | Graphite shroud for GTA120 Zeeman, 1/pk |
| 6310003700 | Graphite tubes, Omega platforms, 10/pk |
| 6610011400 | Drain vessel, SPS-5 with Diluter, 1/pk |
| 6610011600 | Plastic reagent vessel and cap 500mL 1/p |
| 6610011800 | Rinse reservoir for SPS 3,10 L, 1/pk |
| 6610016900 | Replacement abs. cell, Hg Analyzer, 1/pr |
| 6610017500 | Drip tray, AA sample compartment, 1/pk. |
| 6610020500 | Cary 50 dissolution tubing spares kit |
| 6610023000 | Microplate 384 well white hi-bind 100/pk |
| 6610023700 | Flow cell fluor, 10mm 40uL 1/pk |
| 6610023900 | Ultra-micro cell quartz, 1mm 8uL. 1/pk |
| 6610024000 | Sub-micro cell, quartz, 5mm, 40uL. 1/pk |
| 6610024100 | Sub-micro cell, quartz, 10mm, 80uL. 1/pk |
| 6610024200 | Sub-micro cell fluor, UV 10mm 40uL. 1/pk |
| 6610025100 | Spill tray,440 SPS3,1/pk |
| 6610025400 | SPS3 sample rack 60 tubes x 16mm od 1/pk |
| 6610025500 | SPS3 sample rack 40 tubes x 20mm od 1/pk |
| 6610026000 | Overlay for 40 place rack, 18 mm OD tube |
| 6610026100 | Overlay for 60 place rack, 13 mm OD tube |
| 6610026400 | SPS3 sample rack 90 tubes x 13mm od 1/pk |
| 6610026500 | SPS3 sample rack 24 tubes x 25mm od 1/pk |
| 6610026600 | SPS3 sample rack 21 tubes x 30mm od 1/pk |
| 6810008700 | Filter drierite - small |
| 6810009500 | Filter Flow Path outlet of mixer 8101031 |
| 6810009600 | Filter, solvent (40), 1/pk |
| 6818000600 | Replacement filter glass, Holmium Oxide |
| 6910001200 | O-ring (1/4 id x 3/8 od x 1/16)in |
| 6910004000 | O-ring nitr (1/16 id x 7/8 od x 3/32)in |
| 6910008200 | Neb bung O-ring , 7/32in id x 11/32in od |
| 6910009800 | O-ring 3/16 in id x 5/16 in od x 1/16 in |
| 6910010500 | O-ring spray chamber bung, nitrile. 1/pk |
| 6910013600 | O-ring 3/16 in id x 5/16 in od x 1/16 in |
| 6910048090 | Syringe valve seal, 1/pk |
| 6910048700 | Seal,pumphead,quaternary,1/pk |
| 7010017100 | Drip tray for VGA 77, 1/pk |
| 7010017200 | Base plate, VGA77 AA hydride module 1/pk |
| 7210018900 | Graphite tube removal tool |
| 7210035500 | Filter 1 ABS Agilent AA certified, 1/pk |
| 7910019800 | IEEE cable, 4 m, metal covers, 1/pk |
| 7910028900 | Fiber optic probe lite shield Cary 1/300 |
| 7910033500 | Test tube holder, Cary 50/60, 1/pk |
| 7910043700 | ICP s/chamber double-pass glass cyclonic |
| 7910044400 | Torch body fully demountable, axial ICP |
| 7910044500 | Torch body fully demountable, radial ICP |
| 7910046300 | RS232 data cable w/DB9 m-f connector, 5m |
| 7910050700 | Torch one piece, ball joint ax 2.3mm inj |
| 7910051290 | Transfer tube FEP cycl s/c on radial ICP |
| 7910051490 | Transfer tube inert SM s/c on radial ICP |
| 7910051590 | Transfer tube FEP fm s/chamber axial ICP |
| 7910052500 | ICP spray chamber, Twister + Helix, 1/pk |
| 7910052600 | ICP s/chamber, Twister+Helix+Ball joint |
| 7910052700 | Glass transfer tube, 160 L incl. clip |
| 7910052900 | Torch one piece ball joint rad 1.4mm inj |
| 79826-87601 | CAP, Conn 1 |
| 79826-87602 | Cap, Conn 2 |
| 79826-87605 | CAP, CONN .5 |
| 79826-87606 | Capillary, 80 x 0.17mm |
| 79826-87607 | Capillary, 280 x .17mm |
| 79826-87608 | Connection, capillary, 400mm, 0.17mm id |
| 79835-04123 | Diaphragm |
| 79835-65213 | Replacement sieve for check valve crtrdg |
| 79835-67101 | Check valve cartridge |
| 79835-87330 | Solvent mixer |
| 79835-87638 | Column, connector |
| 79841-65501 | Lubricant |
| 79841-87609 | Capillary tubing, 35mm, 0.12mm id. |
| 79841-87610 | Capillary 60 mm |
| 79846-27101 | Seal, threaded end of syringe |
| 79846-27103 | Seal, threaded end of syringe 250ul |
| 79846-67101 | Needle seat |
| 79846-87201 | Needle insert, 25 ul |
| 79846-87202 | Needle insert, 250ul |
| 79846-87601 | Syrng. Capillary 0.25um id, 100mm |
| 79846-87604 | 25ul Loop Capillary |
| 79846-87605 | Seat capillary, 0.12 mm id, 110 mm |
| 79847-60005 | Magazine rack for automatic sampler |
| 79853-68742 | WINDOWS FOR 79853C |
| 79853-68743 | GASKET#1 STD CELL(D) |
| 79880-22711 | Holmium Oxide filter |
| 79883-22404 | Window Screw, SST |
| 79883-27101 | High Pressure Seal Ring |
| 79883-28802 | High Pressure Compression washer |
| 79883-68700 | HI-PR-Cell Kit |
| 79883-68701 | Standard cell repair kit, 1050/1090 |
| 79883-68702 | Gaskets, cell 12/PK |
| 79883-68703 | Cell Screw Kit |
| 810099000 | Mounting bkt inert SM s/c Liberty AX ICP |
| 810132000 | Mounting bkt, cooled s/c Liberty ICP 1/p |
| 810166900 | Standards rack SPS 3, 11 x 16mm od tubes |
| 810167000 | Standards rack SPS 3, 6 x 29mm od tubes |
| 810177600 | Tube holder for SPS 3 autosampler, 1/pk. |
| 810187500 | Mounting bkt, Twister s/c radial ICP 1/p |
| 810187600 | Mounting bkt, Twister s/c axial ICP 1/p |
| 815-0129 | Tubing polyurethane 1/8 x 1/4 in, per ft |
| 815-0485 | Tubing PTFE (.125od x 0.065id)in. per ft |
| 816-0018 | Kit microdissecting UMAS |
| 8500-0656 | PFTBA sample, 10 g |
| 8500-4328 | Headspace Evaluation Sample |
| 8500-4789 | Cap. Inlet Evaluation Sample, Split mode |
| 8500-5067 | PERF, SAMPLE |
| 8500-5808 | HCB performance sample |
| 8500-6813 | Test Std, HP-FFAP (Capillary/Megabore) |
| 8500-8510 | PFDTD Calibrant, 1 ml |
| 8660-0827 | Abrasive Mesh 4000 Grit |
| 8660-0852 | Abrasive Mesh (Micro-Grit Paper) |
| 8710-2474 | Multifunction tool |
| 8829953800 | Vacuum Pump Oil, Inland 45, 1 L |
| 883-9120 | Polystyrene test card (uncertified) 1/pk |
| 883-9750 | Attenuation screen, 1/pk |
| 884-1000 | Sample holder, UMA, 1/pk |
| 89075-23800 | MCT Adjustment Tool |
| 89090-84700 | Temperature Sensor Support |
| 899-1752 | Sample probe, tube, 1/pk |
| 899-1794 | Spare desiccant cartridge for FTIR, 1/pk |
| 910032900 | COVER-CAROUSEL |
| 910245400 | SPS-3 Autosampler cover. 1pk |
| 925-0128 | Polystyrene film, NIST traceable. 2/pk |
| 9300000400 | Filament,Rhenium (Re) alloy,3 x 0,1/pk |
| 9300014200 | SPRAY SHIELD, GOLD, API |
| 9300-1747 | Electrolyte Bottle Cap |
| 9300-1748 | Bottle, 500ml, electrolyte |
| 9301-0273 | Tube, capillary 100/PK |
| 9301-0633 | Syringe, 25ul HPLC injector syringe |
| 9301-0675 | Repair Kit 25ul, Replacement Plunger |
| 9301-1420 | Solvent reservoir, 1L |
| 9301-1421 | Solvent Reservoir 1L with cap |
| 9301-1450 | Solvent reservoir,amber,1L for 1100/1200 |
| 9310-4828 | Wipes, industrial 300/PK |
| 9810039490 | Inert hi-solids sample intro kit, radial |
| 9810039590 | High solids sample intro kit, radial 1/p |
| 9810039690 | Dirty organic sample intro kit axial 1/p |
| 9810039790 | Aqueous sample intro kit, axial 1/pk |
| 9810039890 | Routine organic sample intro kit axial |
| 9810046390 | Hi-sens HF+TDS sample intro kit rad ICP |
| 9810046490 | Hi-sens hi-TDS sample intro kit rad ICP |
| 9810046590 | Flex sample intro kit, Hi-TDS + Org, ax |
| 9810046690 | Hi-sens sample intro kit axial ICP, 1/pk |
| 989-0083 | Lamp, 1/pk |
| 9910024400 | Venturi kit, PEEK, for barrel neb. 1/pk |
| 9910024500 | Nebulizer capillary kit, Pt/Ir, 1/pk |
| 9910024700 | Nebulizer cleaning wire, 3/pk |
| 9910024800 | Capillary tubing, high solids, 3m length |
| 9910025200 | O-ring/gasket kit, Mark IV spray chamber |
| 9910025700 | Glass impact beads Mark V/VI/7. 5/pk |
| 9910026500 | O-ring/gasket kit, Mark VI spray chamber |
| 9910032200 | Carousel and cover PSD 96, 1/pk |
| 9910032700 | Furnace workhd viewing mirror GTA 96/100 |
| 9910035200 | Barrel nebulizer O-ring kit, 1/pk |
| 9910040000 | VGA-76/77 Hydride absorption cell. 2/pk |
| 9910040200 | Gas-liquid separator VGA-76 for AA |
| 9910040700 | Mercury absorption cell VGA 76/77, 1/pk |
| 9910043500 | Nebulizer adjustable barrel, 1/pk |
| 9910043700 | Nebulizer hi-vac barrel, 1/pk |
| 9910044000 | Capillary tubing, hi-vac nebulizer, 3/pk |
| 9910045700 | O-rings for Mark VI Univ s/chamber, 1/pk |
| 9910047700 | ND and Blue filter set with holder, 1/pk |
| 9910053300 | PTFE impact beads Mark V/VI/7. 5/pk |
| 9910053900 | Burner cleaning strips, 100/pk |
| 9910054400 | Quartz atomization cells, ACT-80, 10/pk |
| 9910056800 | Torch, semi-demountable for radial ICP |
| 9910056900 | VGA 76 update kit, ICP gas-liq separator |
| 9910057000 | Quartz injector 1.8mm Semi-demount 3/pk |
| 9910057200 | ICP sample compartment O-ring kit, 1/pk |
| 9910057300 | Injector holder kit, semi-demount torch |
| 9910057400 | Inert V-groove neb for inert SM s/chamb |
| 9910061100 | Mark VI Universal spray chamber, 1/pk |
| 9910061200 | GTA 100 sampler carousel + cover |
| 9910061600 | Liquid trap + float, Univ. Mk VI, 1/pk |
| 9910062000 | Gas-liquid separator VGA 77 for ICP 1/pk |
| 9910062100 | Hydride module for VGA 77, AA operation |
| 9910062200 | Hydride module for VGA 77, ICP operation |
| 9910063100 | Press. relief bung Mk VI s/chamber, 1/pk |
| 9910063200 | Mark VI Univ s/chamber bung assy. 1/pk |
| 9910063600 | Mixing paddles, Mark VI s/chamber, 5/pk |
| 9910066300 | Nebulizer adj. barrel, organic, 1/pk |
| 9910066700 | Carousel + cover PSD 97 a/sampler, 1/pk |
| 9910066800 | Temperature probe holder, square, 4/pk |
| 9910066900 | Temperature probe holder, tapered, 4/pk |
| 9910068500 | UV-Vis reflectance probe holder, 1/pk |
| 9910070400 | Cooled double pass spray chamber for ICP |
| 9910071100 | Gas-liquid separator VGA-77 for AA |
| 9910072000 | KIT ORGANICS ICP-OES |
| 9910075000 | KIT TOOLS COMMON |
| 9910076800 | VGA for Zeeman adaptor AA-600/800Z, 1/pk |
| 9910077600 | Pump bands for SIPS 10/20, 10/pk |
| 9910080300 | Kit Cap Seals for SIPS 10/20, 10/pk |
| 9910081400 | O-ring kit for ICP Argon Saturation Accy |
| 9910081600 | O-ring kit for cooled spray chamber, 1/p |
| 9910083700 | Type 25 rack overlay kit - 17mm od tubes |
| 9910083800 | Type 25 rack overlay kit 18.5mm od tubes |
| 9910084400 | Inert hi-solids sample intro kit, axial |
| 9910084700 | Torch, semi-demountable for axial ICP |
| 9910091200 | Furnace workhd viewing mirror GTA110/120 |
| 9910093000 | Nebulizer capillary kit Mark 7 s/c, 1/pk |
| 9910093100 | Nebulizer block, Mark 7 s/chamber, 1/pk |
| 9910093300 | VGA for Zeeman adaptor kit AA240/280 |
| 9910093400 | Mark 7 spray chamber O-ring kit, aqueous |
| 9910093500 | Mark 7 spray chamber O-ring kit, organic |
| 9910093600 | Mixing paddles fluorinated Mark 7, 5/pk |
| 9910097900 | Cable kit, Cary 50 Dissolution accy 1/pk |
| 9910100700 | Kit Organics Axial |
| 9910102100 | PCI GPIB-IEEE (NI) Interface card |
| 9910102500 | Hg flow thru cell holder AA 220/240G,1/p |
| 9910105800 | Liquid trap, Mark 7 spray chamber, 1/pk |
| 9910106300 | Torch, fully demountable for axial ICP |
| 9910106400 | Torch, fully demountable for radial ICP |
| 9910106900 | Kit, mounting brkt dem torch, radial ICP |
| 9910107000 | Kit, mounting brkt dem torch, axial ICP |
| 9910107100 | Gazfit fitting for ICP torch, 6mm, 4/pk |
| 9910107700 | Neb. EzyFit sample inlet 1.3mm od, 10/pk |
| 9910108200 | O-ring kit for fully demountable torch |
| 9910108300 | Kit Agilent aa certification, 1/pk |
| 9910111900 | SPS 3 probe 0.8mm id inert, PTFE sleeved |
| 9910112000 | SPS 3 probe 1.0mm id inert, PTFE sleeved |
| 9910112600 | Matrix Valu-Pack axial ICP + inert s/c |
| 9910112700 | Extenda Valu-Pack radial ICP + inert s/c |
| 9910112800 | Extenda Valu-Pack axial ICP + cycl. s/c |
| 9910113100 | High capacity carousel kit for GTA 120 |
| 9910116800 | Syringe kit for PSD-97/100/110. 1/pk |
| 9910117800 | All-Glass Sample System, Axial |
| 9910120200 | Purged cabinet hardware kit,1/pk |
| 9910125200 | Tubing kit axial ICP ketone + inert s/c |
| 9910125600 | Hi Solids SIS kit, axial ICP w/cycl. s/c |
| 9910125700 | Hi Solids SIS kit, radial ICP w/cycl s/c |
| 9910125800 | Hi Solids SIS kit, axial ICP w/inert s/c |
| 9910125900 | Hi Solids SIS kit radial ICP w/inert s/c |
| 9910126000 | Application kit, Inert SIS for axial ICP |
| 9910126100 | Application kit Inert SIS for radial ICP |
| 9910126200 | Application kit Inert, radial ICP no s/c |
| 9910126300 | Organics SIS kit, axial ICP w/cycl. s/c |
| 9910126400 | Organics SIS kit, radial ICP w/cycl. s/c |
| 9910126500 | Organics SIS kit, axial ICP w/inert s/c |
| 9910126600 | Organics SIS kit, radial ICP w/inert s/c |
| 9910126700 | Aromatics SIS kit, axial ICP w/cycl. s/c |
| 9910126800 | Aromatics SIS kit radial ICP w/cycl. s/c |
| 9910126900 | Aromatics SIS kit, axial ICP w/inert s/c |
| 9910127000 | Aromatics SIS kit radial ICP w/inert s/c |
| 9910127100 | Ketones SIS kit, axial ICP w/cycl. s/c |
| 9910127200 | Ketones SIS kit, radial ICP w/cycl. s/c |
| 9910127300 | Ketones SIS kit, axial ICP w/inert s/c |
| 9910127400 | Ketones SIS kit, radial ICP w/inert s/c |
| 9910127500 | Volatiles SIS kit, axial ICP w/cool s/c |
| 9910127600 | Volatiles SIS kit, radial ICP w/cool s/c |
| 9910127800 | Nebulizer EzyLok gas connector, ICP-OES |
| 9910128300 | Flow cell repl ftg, PS325/335, 1/pk |
| 9910129500 | PSD 120 sampler carousel + cover, 1/pk |
| 9910130600 | Kit Exhaust Cabinet Hardware |
| 9910130900 | SPS 3 probe 1.3mm id inert, PTFE sleeved |
| 9910137800 | Kit, Needle U and Injection port seal |
| 9910141000 | Hi Solid SIS kit, axial ICP inert+sheath |
| 9910141700 | Kit external source (xe + d2), 1/pk |
| 9910143200 | SVS2 sample loop kit 1 (0.25mL) |
| 9910143300 | SVS2 sample loop kit 2 (0.5mL) |
| 9910143400 | SVS2 sample loop kit 3 (1.0mL) |
| 9910143500 | SVS2 sample loop kit 4 (1.5mL) |
| 9910143600 | SVS2 sample loop kit 5 (2.0mL) |
| 9910143700 | SVS2 sample loop kit 6 (2.5mL) |
| 9910143800 | SVS2 sample loop kit 7 (3.0mL) |
| 9910143900 | SVS2 sample loop kit 8 (3.5mL) |
| 997-0081 | Xenon source and power supply, 1/pk |
| 997-0082 | Deuterium source and power supply, 1/pk |
| 998-0000053-EHS | Union Elbow M5 |
| AS5001180 | Inlet filter,for 212 pump,1/pk |
| ASA5001009U10 | SEAL, 2mL PISTON, 212-LC, UHMWPE, 10PKG |
| ASA5001009U2 | SEAL, 2mL PISTON, 212-LC, UHMWPE, 2PKG |
| ASA5001133 | Inlet outlet cv crtdg,212-LC 2mL head |
| AX2050-1 | 971-FP ELSD Connection Kit |
| CP23050 | Fingertight Fitting PEEK |
| CP23054 | Fingertight Fitting PEEK (Set of 10) |
| CP392372031 | NICKEL CATALYST COLUMN FACTORY INSTALLED |
| CP470127 | Vespel Ferrule 1/16X0.8 Sp21 |
| CP490210 | 490 Micro GC set of 5 internal filter |
| CP736202 | Filter, charcoal, SS, 1/16in.OD, 1/pk |
| CP736467 | 5 FILTERS for EXT.FILTER Assy |
| CP737886 | COC insert for 530 um Ultimetal column |
| CP739531 | Membrane repls-BTU,Genie 170, 5/pk |
| CP740206 | Pump manifold Assy |
| CP741035 | Calibra smpl,SimDist (D2887E),hazd,1/pk |
| CP741161 | Flush vial,assy,large,1/pk |
| CP742210 | Carrier gas Duo-bed Pencil filter |
| CP742211 | Split line Pencil filter |
| CP85315 | Valve,BHU,SS,1/8inx1/16in |
| CP85518 | Filter, 7 um, 1/pk |
| CP86517 | Union b/h,Valco,Silco,1/8inx1/16in.,1/p |
| CP912241 | Replacement for oil mist eliminator |
| CP913246 | ICP nebulizer, PTFE MiraMist, 1/pk |
| CP913584 | Z-axis drive tubing, ASX 130/260, 1/pk |
| CP914394 | Mounting brkt Tracey inert s/c Axial ICP |
| CP914395 | Mounting brkt Tracey inert s/c Radl ICP |
| CP914396 | ICP Nebulizer Opalmist PFA conc. 2mL/min |
| CP914397 | ICP spray chamber Tracey TFE inert+Helix |
| CP914506 | ICP nebulizer, PEEK MiraMist, 1/pk |
| CP914708 | ICP s/chamber Tracey glass cycl + Helix |
| CP914815 | ICP nebulizer, Ceramic VEE spray, 1/pk |
| CP914870 | Torch radl hi-solid+ball joint 1.8mm inj |
| CP914879 | Alumina injector 2.4mm Semi-demount 1/pk |
| CP915038 | Dewar holder + cap for Cary Eclipse |
| CP915259 | Fiber optic probe quartz low temperature |
| CP915296 | Capillary for SnCl2, Hg Analyzer, 1/pk |
| CP959366 | Neb SeaSpray 2mL/min at 1 L/min w/EzyFit |
| C-TBE10 | Empty Stainless Steel TD Tubes, 10 pack |
| C-TBP1C1C | Carbograph 1 SS Tube for Pumped C5-C14 |
| C-TBP1CXC | Carb X SS Tubes for Pumped/Diffusion |
| C-TBP1TC | Tenex SS TD Tubes, Preconditioned/Capped |
| C-TNXTA | Tenax TA 35-60 Mesh, 10 Grams |
| C-UN010C | Universal SS Tubes, Pack of 10 |
| DY70007701 | Sparge Probe, S/N above 13160, Cleaned |
| G1072-20008 | Cylinder, draw out |
| G1099-20030 | Column Installation tool for 5973/5975 |
| G1099-20130 | ION Source Chamber |
| G1099-20132 | 73 Repeller Ultra |
| G1099-20133 | Repeller insulator |
| G1099-20136 | Transfer line sckt |
| G1099-60566 | 597X Tool Kit and cleaning supplies |
| G1099-80001 | High energy dynode, 5973 series |
| G1099-80039 | Oil Mist Filter, 3/8 BSP Male Threads |
| G1103-61611 | General Purpose Cable |
| G1120-60006 | 8453 UV Vis Stirring Module kit |
| G1120-62301 | Cell Holder, Multi Cell Transport |
| G1156-68711 | Capillary kit Column regeneration AS |
| G1156-68712 | Capillary kit column selection 6 columns |
| G1156-68713 | Capillary kit column regeneration prep |
| G1156-68714 | capillary kit (ext) sample enrichment |
| G1160-68706 | Solvent selection tubing kit 4 solvents |
| G1176-60541 | Split vent trap for the 6820 |
| G1290-60600 | I.D. Cable 7694/3396 |
| G1310-68730 | PM Kit for isocratic/quaternary pump |
| G1310-68731 | PM Kit for seal wash option |
| G1310-68741 | PM kit for 1260 Iso/Quat/1220 pump |
| G1310-68742 | Seal wash PM kit for 1260 Pump |
| G1311-60002 | Plunger Housing |
| G1311-60003 | Bottle Head Assembly |
| G1311-60006 | In-line filter for G1311A |
| G1311-60009 | Purge valve assembly, SST |
| G1311-67304 | LC Pump PTFE connecting tube |
| G1311-68705 | 1100/1200 Pump accessory kit |
| G1311-68710 | Pump Start-up Kit |
| G1311-68711 | Active seal wash kit for iso/quat pumps |
| G1311-81600 | Capillary, damper to inlet chamber 2 |
| G1311-81601 | Capillary, outlet valve to damper |
| G1312-60020 | Cartridge for active inlet valve 600bar |
| G1312-60023 | Purge valve assembly, 600 bar |
| G1312-60025 | Active inlet valve,without cartridge |
| G1312-60061 | Purge Valve 1260 |
| G1312-60066 | Passive Inlet Valve 1220/1260 |
| G1312-60067 | Outlet Ball Valve for 1100/1200/1260 |
| G1312-60068 | 1260 Solvent Selection Valve |
| G1312-60166 | 1260 Infinity inlet valve type N |
| G1312-60167 | 1260 Infinity outlet valve type N |
| G1312-67300 | Capillary Outlet ball valve to piston 2 |
| G1312-67301 | Capillary, damper to purge valve |
| G1312-67302 | Mix.SST-Capillary Assembly, binary pump |
| G1312-67304 | Restriction Capillary,SST |
| G1312-67305 | SST connecting capillary,60cm, 0.17mm |
| G1312-67500 | Calibration Capillary Assy |
| G1312-68711 | Active seal wash kit for binary pumps |
| G1312-68716 | Bottle head assembly for F29/32 tapered |
| G1312-68730 | PM Kit for binary pump |
| G1312-68741 | PM kit for G1312 binary pump |
| G1312-87300 | Absorber capillary, 500uL volume |
| G1312-87301 | SST Restriction capillary, 0.17mm id |
| G1312-87303 | SST Capillary 400x0.17 mm, m/m, ps/ps |
| G1312-87304 | SST Capillary 700x0.17mm, m/m, ps/ps |
| G1312-87305 | SST Capillary 150x0.17mm, m/m, ps/ps |
| G1312-87306 | SST Capillary 105x0.17mm, m/m, ps/ps |
| G1312-87330 | Solvent mixer, 1100/1200 Series |
| G1313-27302 | Disposal Tube for ext. vial tray |
| G1313-43204 | Seat adapter |
| G1313-43216 | Waste Adapter, 1100/1200 Autosamplers |
| G1313-44510 | 100 position tray for 2 ml vials |
| G1313-44512 | Tray for 40 2ml Vials |
| G1313-44513 | Tray for 15 6ml vials |
| G1313-60004 | External Vial Tray for 17 2m vials |
| G1313-68709 | Autosampler Start Up Kit |
| G1313-68711 | G1313 Multidraw kit |
| G1313-68712 | Post Column reaction kit for 1100/1200LC |
| G1313-68713 | Arm Spare Kit |
| G1313-68719 | PM Kit for G1329B Autosampler |
| G1313-68730 | PM Kit for standard autosamplers |
| G1313-87102 | Needle seat PEEK, 0.17 mm id capillary |
| G1313-87104 | Needle seat PEEK w/o capillary, G1313A |
| G1313-87201 | Needle, G1313A Autosampler |
| G1313-87202 | Needle, 900ul, 1100/1200 |
| G1313-87203 | Needle assy for use with PEEK seat |
| G1313-87300 | Waste tube,PTFE, 12cm, 0.7mm id |
| G1313-87301 | Capillary to metering device |
| G1313-87302 | PEEK Seat Tubing, 0.17mm id 100mm, 2,3ul |
| G1313-87303 | Loop extension capillary,SST 900 ul |
| G1313-87304 | Capillary, 18cm, .12mm id 1/16 male/male |
| G1313-87305 | Capillary, 0.17x180mm 1/16 in male/male |
| G1313-87306 | PEEK Capillary, 0.25 mm id, 160 mm |
| G1313-87307 | Seat capillary, 0.5ml, 0.5mm id |
| G1313-87308 | Seat capillary, 1.5ml, 0.9mm id |
| G1313-87309 | PEEK Loop Capillary for 100ul Sample |
| G1314-60081 | MICRO CELL ASSY |
| G1314-60182 | Hi Pressure flow cell VWD,10mm,14ul,RFID |
| G1314-60183 | Semi-micro flow cell VWD,6mm,5ul,RFID |
| G1314-60186 | Standard flow cell VWD,10mm 14ul,RFID |
| G1314-60187 | Micro Flow cell VWD,3mm,2ul,RFID |
| G1314-65050 | CELL KIT STD |
| G1314-65051 | Gasket No.2 std service |
| G1314-65052 | CELL KIT MICRO |
| G1314-65053 | Gasket No. 2 micro service |
| G1314-65054 | Cell Kit High Pressure |
| G1314-65056 | Cell Kit Semi-Micro |
| G1314-65061 | CELL KIT STD |
| G1314-65062 | CELL SCREW KIT |
| G1314-65063 | Gasket No. 1 KIT |
| G1314-65064 | Gasket No.2 KIT |
| G1314-65065 | Ring KIT |
| G1314-65066 | Ring No.2 KIT |
| G1314-68705 | G1314A VW detector accessory kit |
| G1314-87301 | Capillary ST 0.12 x 310mm S/E |
| G1314-87302 | Capillary ST 0.17 x 120mm S/E |
| G1315-27705 | Cell housing for quartz prep flow cells |
| G1315-45001 | Lever for Holmium Oxide Filter |
| G1315-60011 | Semimicro flowcell, 6mm, 5ul, 120bar |
| G1315-60012 | Standard flowcell, 10mm, 13ul, 120bar |
| G1315-60015 | High pres.micro flowcel,6mm,1.7ul,400bar |
| G1315-60016 | Preparative flow cell SS 3mm path length |
| G1315-60017 | Preparative flow cell, quartz 0.3mm path |
| G1315-60018 | Preparative flow cell quartz 0.06mm path |
| G1315-60022 | Standard flow cell 10mm, 13uL, 120bar |
| G1315-60024 | Micro Flow cell 2 uL, 3mm path, 120 bar |
| G1315-60025 | Semi Micro Flow cell 5 uL, 6mm, 120 bar |
| G1315-67301 | PTFE connecting tubing for Quartz prep |
| G1315-67302 | PTFE connecting tubing for Quartz prep |
| G1315-68703 | Fused silica/PEEK capillary 50um 40cm |
| G1315-68708 | Fused silica/PEEK capillary 75um 70cm |
| G1315-68710 | Front seals (std/semimicro) 12/PK |
| G1315-68711 | Back seals-std cell 12/PK |
| G1315-68712 | Cell repair kit for standard cell |
| G1315-68713 | Cell repair kit-semi micro cell |
| G1315-68715 | Sealing kit for 500nl flow cell |
| G1315-68716 | 80 nL Flow Cell for 1100/1200 DAD/MWD |
| G1315-68724 | 500 nL Flow Cell for 1100/1200 DAD/MWD |
| G1315-68725 | Sealing kit for 80 nl flow cell |
| G1315-80001 | Quartz cell body, 10mm |
| G1315-80002 | Quartz cell body, 80 nL, 6mm path length |
| G1315-80004 | Quartz body, 0.3 mm for prep flow cell |
| G1315-87101 | Cell seal assembly (500nl) |
| G1315-87102 | 80nl cell seal assembly |
| G1315-87302 | Outlet capillary, 0.17mm id |
| G1315-87303 | SST Capillary 150x0.17mm,m/f,ns |
| G1315-87305 | SST connecting capillary for SST prep |
| G1315-87306 | Outlet capillary, 0.12mm id |
| G1315-87307 | SST Capillary 500x0.12mm, m/m, ps/ns |
| G1315-87311 | Column connect capillary, 380 x 0.17mm |
| G1315-87312 | Column connect capillary 150 x 0.12mm |
| G1315-87313 | Fused silica/PEEK capillary, 25um 20cm |
| G1315-87318 | Fused silica/PEEK capillary, 25um 60cm |
| G1315-87319 | DAD heat exchanger capillary 310 x0.17mm |
| G1315-87321 | Inlet capillary w heat exchanger 0.17mm |
| G1315-87323 | Fused silica/PEEK capillary, 50um 40cm |
| G1315-87325 | Inlet capillary w heat exchanger 0.12mm |
| G1315-87328 | Fused silica/PEEK capillary, 50um 12cm |
| G1315-87333 | Fused silica/PEEK capillary, 100um 30cm |
| G1315-87339 | DAD heat exchanger capillary 310x0.12mm |
| G1316-27301 | SS Capillary 100x0.12mm, m/m, ns/ns 0.8 |
| G1316-60001 | Thermal Column Insulation Enclosure Kit |
| G1316-68706 | Fitting holder assembly |
| G1316-68709 | 2Pos/10Port col switching valve kit |
| G1316-68711 | Capillary kit column regeneration intern |
| G1316-68716 | Capillary kit for 0.12 mm id use of 1200 |
| G1316-68721 | Capillary kit micro column regeneration |
| G1316-80002 | Heater Long Up 0.12ID (1.6ul internal) |
| G1316-80003 | Heater Long Down 0.12ID (1.6ul internal) |
| G1316-80004 | Heat Exchanger/Cooler, 1.5uL |
| G1316-80012 | Heat Exchanger 1290 Series long down |
| G1316-80013 | Heat Exchanger 1290 Series long up |
| G1316-83200 | Carrier for heat exchanger TCC SL |
| G1316-87300 | Capillary, 0.17x90mm 1/16 in male/male |
| G1316-87303 | Capillary connect.capillary, 7cm, 0.12mm |
| G1316-87304 | SS Capillary 130x0.12mm, m/f, ns 0.8 |
| G1316-87305 | SS Capillary 340x0.12mm, m/m, ps/ns 0.8 |
| G1316-87306 | SS Capillary 75x0.12mm, m/m, ns/ns 0.8 |
| G1316-87309 | SST Capillary 500x0.12 mm, m/m, ps/ns |
| G1316-87312 | SST Capillary 50 x 0.12 mm, m/f, ns |
| G1316-87313 | SST Capillary 70 x 0.12 mm, m/f, ns |
| G1316-87314 | SST Capillary 90 x 0.12 mm, m/f, ns |
| G1316-87315 | SST Capillary 130 x 0.12mm, m/f, n-s |
| G1316-87316 | SST Capillary 170x0.12 mm, m/m, n-s/n-s |
| G1316-87317 | SST Capillary 210x0.12 mm, m/m, n-s/n-s |
| G1316-87318 | SST Capillary 300x0.12 mm, m/m, n-s/n-s |
| G1316-87319 | SST Capillary 340x0.12 mm, m/m, n-s/n-s |
| G1316-87321 | SST Capillary 105x0.17mm, m/m, n-s/n-s |
| G1316-87323 | SST Capillary 170x0.17mm, m/m, n-s/n-s |
| G1316-87326 | SS Capillary 75x0.12mm, f/m, ns 0.8 |
| G1316-87327 | SST Capillary 170x0.12 mm, m/f, n-s |
| G1316-87328 | SS Capillary 210x0.12mm, m/m, ps/ns 0.8 |
| G1316-89200 | Carrier for heat exchanger TCC SL Plus |
| G1321-60005 | Flow cell 8ul for FLD |
| G1321-60007 | Cuvette 8ul for FLD |
| G1321-60015 | Flow cell 4ul for FLD |
| G1322-67300 | Tubing kit degasses to pump |
| G1322-68705 | Online degasser asscessory kit |
| G1328-87600 | SST Capillary, 500 x 0.17mm |
| G1329-60011 | Tray for 100 x2ml vials, thermostattable |
| G1329-68718 | Light Protection Kit for G1329A |
| G1329-68719 | PM kit for 1200 autosampler SL |
| G1329-68726 | Cabinet Upgrade Kit for G1329A |
| G1329-68727 | Door Replacement Kit for G1329A |
| G1329-68736 | Cabinet Upgrade Kit for ALS |
| G1329-68737 | Door Replacement Kit for ALS |
| G1329-80001 | u-LC needle for G1329 autosampler |
| G1329-87012 | Seat assy 0.12mm ID Standard Autosampler |
| G1329-87017 | Seat assy 0.17mm ID Standard Autosampler |
| G1329-87101 | Needle seat/capillary, 100um id, 1.2 uL |
| G1329-87103 | Needle seat/capillary, 50um id, 0.3uL |
| G1329-87300 | SST capillary 90cm, 0.17mm id, 1/16 fitt |
| G1329-87302 | Extended loop capillary, 0.25mm 180cm |
| G1361-22402 | Sapphire piston for prep pump |
| G1361-23204 | Frit adapter, 4mm, PTFE |
| G1361-23205 | Frit Adapter, PTFE for 4.7 mm od tubing |
| G1361-60008 | PREP PRESSURIZED IN ASSY |
| G1361-60012 | Valve assy, inlet/outlet for prep pump |
| G1361-60022 | Bottle Head Assyembly for Prep System |
| G1361-67300 | SS Capillary, 0.6x173 mm, 2 1/16in male |
| G1361-67301 | SS Capillary, 0.6x175 mm, 2 1/16in male |
| G1361-67302 | SS Capillary, 0.6x400 mm, 2 1/16in male |
| G1361-67303 | SST Capillary, 0.5x160 mm, 2 1/16in male |
| G1361-67304 | SS capillary, 0.6x111 mm, 1/16in male |
| G1361-67305 | SS capillary, 0.6x40 mm, 1/16in male |
| G1361-67306 | SS capillary, 0.6x367 mm, 1/16in male |
| G1361-68707 | Accessory kit prep pump/gradient G1361A |
| G1361-68710 | PM kit for 1100 series prep pump |
| G1362-68706 | Interface Tubing Kt |
| G1362-87300 | Interfacing Capillary |
| G1364-27107 | Flap Septum, PEEK, for internal tray |
| G1364-60011 | Needle carrier without needle, prep |
| G1364-60021 | Pushing Adapter Assy for G1364D |
| G1364-68706 | On-Line matrix Kit for MALDI spotting |
| G1364-68711 | Preparative tubing kit 0.8mm i.d (PTFE). |
| G1364-68712 | Analytical tubing kit 0.25 mm i.d (PTFE) |
| G1364-68723 | Low Dispersion Tubing Kit 0.15mm ID PTFE |
| G1364-68730 | Funnel seals,10/pk for G1364-84502 Tray |
| G1364-81701 | Maldi Spotting Tips, PTFE (10/pk) |
| G1364-83205 | MALDI spotting adapter for G1364D |
| G1364-84516 | Tray holding 215 tubes,12x100mm,7ml |
| G1364-84521 | Tray for 4 well plates, cooled |
| G1364-84522 | Tray, 2 well plates, 10 funnels cooled |
| G1364-84523 | Tray Holding 40 tubes, 30x100mm, 50ml |
| G1364-84524 | Tray Holding 60 Tubes, 25x100mm,35ml |
| G1364-84525 | Tray holding 126Tubes, 16x100mm,14ml |
| G1364-84531 | Tray for 4 Well Plates,adjustable,cooled |
| G1364-84532 | 40Funnel Tray for G1364C FractionCollect |
| G1364-86707 | Tubing for funnels of G1364-84502, 10/PK |
| G1364-86708 | Waste tube 0.5mm id analyt intern tray |
| G1364-86711 | Waste tube, PTFE, 20cm 1.4mm id 2.0mm od |
| G1364-87201 | Needle assy short for fraction collector |
| G1364-87202 | Needle Assy, 20 mm for G1364C |
| G1364-87304 | Fused silica/Peek capillary, 25um, 50cm |
| G1364-87305 | Fused silica/Peek capillary, 50um, 50cm |
| G1364-87306 | Fused silica/Peek capillary, 100um, 50cm |
| G1367-60003 | 100 uL analytical head assembly |
| G1367-60301 | SST cap valve to metering 0.17x160mm |
| G1367-68705 | Well Plate Sampler Accessories Kit |
| G1367-68713 | High Volume Kit for G1367D |
| G1367-68730 | PM Kit for well plate autosamplers |
| G1367-68734 | PM KIT for HiP Sampler G1367C/D |
| G1367-68741 | PM kit for G1367E sampler |
| G1367-87012 | Low Carry Over Seat 0.12 |
采購中心
化工儀器網