電流探頭 80i-110s/FLUKE 80i-110s 交/直流電流鉗
介紹
| AC/DC Current clamp The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001. - Current Range: 0.1 to 100A DC or 0.1 to 70A AC
- Basic Accuracy (DC to 1kHz):
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA
40A to 80A +/- 12% of reading + 50mA
80 to 100A +/- 15% of reading - Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
- Bandwidth: 1Hz to 20kHz
- Working Voltage: 600V AC rms
- Maximum Conductor Size: 11.8 mm (.46 inch) diameter
- Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
|
|
|
| |
電流探頭 80i-110s/FLUKE 80i-110s 交/直流電流鉗產品技術指標：
| Specifications | | Nominal current range | | | Continuous current range | | | 0.1 A - 10 A AC/DC | | | 1 A - 100 A AC/DC |
| | Maximum Non-Destructive Current | | | Lowest measurable current | | | Basic Accuracy | | | 3% + 50 mA (@ 10 A) | | | (% reading + floorspec) |
| | Useable frequency | | | Output level(s) | | | Zero error adjustment | |
| Safety Specifications | | Safety | | | CAT II, 600 V | | | CAT III, 300 V |
| | Maximum voltage | |
| Mechanical & General Specifications | | Warranty | | | Battery Life | | | Maximum conductor diameter | | | Output cable length | | | BNC Adapter | |
|
|
| |
配件與型號：
此頁是電流探頭 80i-110s/FLUKE 80i-110s 交/直流電流鉗的詳細介紹與技術說明，詢價購買。
采購中心
化工儀器網