上海薩帛機電設備有限公司，價格優勢！
：彭  
:（直線） :
詢價發：sales@sahbore.com、
傳真
地址：中國（上海）自由貿易試驗區楊高北路536號樂非天地大廈6層
詢價請提供（品牌+型號+數量+公司全稱/）及圖片信息。我們會盡快做出回復 。
優價銷售：
Comax    HGK3.230.1    信號放大器
Comax    HGK3.230.1    信號放大器
Comax    HGK3.230.1    信號放大器
Comax Industrielle Signaltechnik AG    SOP.024.21    蜂鳴器
Comax Industrielle Signaltechnik AG    SOP.024.21    蜂鳴器
Comax Industrielle Signaltechnik AG    SOP.024.21    蜂鳴器
Comax Industrielle Signaltechnik AG    SOP.024.26    信號放大器
Comax Industrielle Signaltechnik AG    ES4.024.3    信號放大器
Comax Industrielle Signaltechnik AG    BLK15.024.21    信號放大器
Comax Industrielle Signaltechnik AG    SOP.024.21    信號放大器

Comax AG

Alarmieren, warnen, rufen, melden...

Befassen Sie sich mit solchen Themen?  Dann sind Sie bei uns genau richtig! 
Wir bieten eine breite Auswahl an Signalger?ten, efonen und Alarmmelder, eine kompetente Beratung, eine hohe Lieferbereitschaft sowie kundenspezifische Anpassungen nach Ihren Spezifikationen.

Fragen Sie uns an, wir freuen uns auf Ihre Kontaktnahme!

PRODUKT HIGHLIGHT Elektronische Signalhupe mit Xenon-Blitzleuchte H110TX Geh?use Kunststoff grau 3 Tonvarianten ... erfahren Sie mehr WUNSCHPRODUKT NICHT GEFUNDEN? Sollten sie kein Produkt gefunden haben, das Ihren Anforderungen entspricht, k?nnen wir Ihnen weiterhelfen. Wir haben eine breite Markterfahrung und k?nnen Ihnen vielleicht das richtige Produkt beschaffen. Oder wir passen ein bestehendes Serienger?t an Ihre Bedürfnisse an. Oder wir entwickeln Ihnen eine massgeschneiderte L?sung! Fragen Sie uns an, ganz unverbindlich! COMAX GOES Wir haben unsere Webseite so eingerichtet, dass Sie jetzt unsere Produkte auch mit Ihrem Smartphone ausw?hlen und mit wenigen Klicks eine Offertanfrage abschicken k?nnen! Testen Sie diese Erweiterung noch heute, Sie werden begeistert sein!

ExII Signalhupe mHP11

ExII Signalhupe mHP12

除供應Comax產品外，我司亦優價銷售以下CS INSTRUMENTS列表型號：

"cata-
logue
page"    MULTIFUNCTION MEASURING INSTRUMENTS        "Instru-
ment"
4-13    "Inligent chart recorder for compressed air and gases 
Measurement - control - indication - alarm - recording - evaluation"        DS 500
14-21    "Inligent chart recorder
Energy analysis - consumption measurement - leakage calculation at compressed air systems"        "DS 500 
mobil"
22     current/effective power meter suitable for DS 500         "CS PM 
600"
23    "Current/effective power meter
 for panel mounting"        "CS PM 
710"
            
    HUMIDITY/DEW POINT MEASUREMENT        
26-31    "Portable dew point meter for relative humidity,
temperature, dew point measurement"        "DP 500
DP 510"
32-33    Dew point sensor for membrane and adsorption dryers        FA 410
34-35    "Dew point sensor and condensate switch 
for refrigeration dryers "        FA 415
36-41    Dew point set for compressed air and gases        DS 400
42    "Dew point measurement for refrigeration, membrane
and adsorption dryers "        FA 400
43    Dew point measurement in explosive areas        FA 300 Ex
43    Accessories mains units        
44-45    Accessories for dew point measurement and calibration        
            
    FLOW/CONSUMPTION MEASUREMENT        
47-52    Consumption counter for compressed air and gases        VA 420
54    Consumption sensor for compressed air and gases        VA 400
55-61    Flow station for compressed air and gases        DS 400
62-63    Flow direction switch for compressed air systems        VA 409
64    Useful accessories: Measuring sections        
65    Useful accessories: Spot drilling collars, thickness meter        
66    Calibration of consumption sensors and flow stations        
            
    COMPRESSED AIR        
            Order no.
DS 500 - inligent chart recorder in basic version (4 sensor inputs)            0500 5000
Option 4 additional sensor inputs for DS 500            Z500 5001
Option 8 additional sensor inputs for DS 500            Z500 5002
Option Integrated webserver            Z500 5003
Option "consumption report" statistics, daily/weekly/monthly report            Z500 5004
Option "quick measurement with 10 msec sampling rate" for analogue sensors            Z500 5005
Option version for panel mounting            Z500 5006
Option power supply 24VDC (instead of 100...240 VAC)            Z500 5007
"Option “mathematics calculat. function" for 4 freely selectable “virtual" channels,
(mathematical functions: addition, subtraction, division, multiplication)"            Z500 5008
Option: "Totalizer function for analogue signals"            Z500 5009
            
software:            
"CS Soft Basic for DS 500 - data evaluation in graphic and table form,
reading out of the measured data of one DS 500 via USB or Ethernet"            0554 7040
"CS Soft Network - Database Client/Server Solution (up to 5 DS 500) - 
database (MySQL) to Server - data evaluation via Client-Software"            0554 7041
"CS Soft Network - Database Client/Server Solution (up to 10 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software"            0554 7042
"CS Soft Network - Database Client/Server Solution (up to 20 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software"            0554 7043
"CS Soft Network - Database Client/Server Solution (> 20 DS 500) -
database (MySQL) to Server - data evaluation via Client-Software"            0554 7044
Software Support / h            9999 9998 
"VA 400 consumption sensor in basic version:
Standard (92.7 m/s), sensor length 220 mm, without display"            0695 4001
Max. version (185 m/s)            Z695 4003
HighSpeed version (224 m/s)            Z695 4002
Sensor length 120 mm            ZSL 0120
Sensor length 160 mm            ZSL 0160
Sensor length 220 mm            ZSL 0220
Sensor length 300 mm            ZSL 0300
Sensor length 400 mm            ZSL 0400
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease             3200 0010
oil and fat free, special cleaning              0699 4005
5 point precision calibration of new instrument with ISO certificate            3200 0001
Real gas calibration            3200 0015
Real gas calibration for mixed gases            
            Order no.
Consumption counter VA 420 with integrated measuring section (R 1/4" DN 8)            0695 0420
Consumption counter VA 420 with integrated measuring section (R 1/2 DN 15)            0695 0421
Consumption counter VA 420 with integrated measuring section (R 3/4" DN 20)            0695 0422
Consumption counter VA 420 with integrated measuring section (R 1" DN 25)            0695 0423
Consumption counter VA 420 with integrated measuring section (R 11/4" DN 32)            0695 0426
Consumption counter VA 420 with integrated measuring section (R 11/2" DN 40)            0695 0424
Consumption counter VA 420 with integrated measuring section (R 2" DN 50)            0695 0425
            
Connection cables:            
Connection cable for VA/FA 400 5 m with M12 plug (power supply and analogue output)            0553 0104
Connection cable for VA/FA 400 10 m with M12 plug (power supply and analogue output)            0553 0105
Connection cable for VA/FA 400 20 m with M12 plug (power supply and analogue output)            0553 0120
            
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease             3200 0010
oil and fat free, special cleaning              0699 4005
5 point precision calibration of new instrument with ISO certificate            3200 0001
Real gas calibration            3200 0015
Real gas calibration for mixed gases            
            
additional supplies:            
Closing cap for measuring section VA 420 in aluminium            0190 0001
Closing cap for measuring section VA 420 stainless steel 1.4404            0190 0002
            Order no.
FA 410 dew point sensor, -80°...20°Ctd incl. inspection certificate            0699 0410
FA 415 dew point sensor, -20°...50°Ctd incl. inspection certificate            0699 0415
Standard measuring chamber for compressed air up to 16 bar            0699 3390
            
connection cables:            
Connection cable for VA/FA 400 5 m with M12 plug (power supply and analogue output)            0553 0104
Connection cable for VA/FA 400 10 m with M12 plug (power supply and analogue output)            0553 0105
Connection cable for VA/FA 400 20 m with M12 plug (power supply and analogue output)            0553 0120
For more measuring chambers see DEW POINT - MEASURING CHAMBERS            
            Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale            0694 1886
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale            0694 0356
Standard pressure sensor CS 40, 0...40 bar, ± 0,5 % accuracy of full scale            0694 3930
Standard pressure sensor CS 1,6 absolute, 0...1,6 bar abs.,± 1 % accuracy of full scale            0694 3551
Standard pressure sensor CS 1,6 absolute, 0...1,6 bar abs.,± 0,5 % accuracy of full scale            0694 3550
Standard pressure sensor CS 100, 0...100 bar, ± 1 % accuracy of full scale            0694 3557
Standard pressure sensor CS 250, 0...250 bar, ± 1 % accuracy of full scale            0694 3558
Standard pressure sensor CS 400, 0...400 bar, ± 1 % accuracy of full scale            0694 3559
"Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar"            0694 3560
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale            0694 3553
Precision pressure sensor CS 0,6 accuracy < 0.5 %            0694 3549
"Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar"            
            Order no.
"Screw-in temperature probe Pt 100, class A, length 300 mm, ? 6 mm,
with measuring transducer 4...20 mA = -50...+500°C (2-wire-technology)"            0693 0002
"Temperature probe cable Pt 100, Class A, length 300 mm, ? 6 mm,
-50...+180°C, 5 m probe connection cable with open ends"            0604 0102
"Temperature probe cable Pt 100, Class A, length 150 mm, ? 6 mm,
-50...+180°C, 5 m probe connection cable with open ends"            0604 0100
Indoor/outdoor temperature probe -50...+100°C            0604 0101
Indoor/outdoor temperature probe -50...+100°C with meas. transducer 4 to 20 mA = -50 to 100 °C ( 2-wire technology)            0693 0001
Clamp screwing 6 mm, G1/2", PTFE clamping, pressure-tight up to 6 bar            0554 6003
Clamp screwing 6 mm, G1/2", VA clamping, pressure-tight up to 10 bar            0554 6004
            Order no.
Connection cable 5 m            0553 0108
Connection cable 10 m            0553 0109
            Order no.
"CS PM 710 CS PM 710 current/effective power meter for panel mounting,
current transformer from 100 A to 2000 A connectible"            0554 5343
"Current transformer 100/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 21 mm)"            0554 5344 
"Current transformer 200/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 21 mm)"            0554 5345
"Current transformer 300/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 22 mm)"            0554 5346
"Current transformer 500/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 22 mm)"            0554 5347
"Current transformer 600/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 22 mm)"            0554 5348
"Current transformer 1000/5 A connectible to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)"            0554 5349 
"Current transformer 2000/5 A connectible to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)"            0554 5350
            
Connection cable CS PM 710:            
Connection cable 5 m            0553 0108
Connection cable 10 m            0553 0109
            Order no.
Multifunction measuring instrument DS 500 , 4 sensor inputs            0500 5012
Multifunction measuring instrument DS 500 , 8 sensor inputs            0500 5013
Multifunction measuring instrument DS 500 , 12 sensor inputs            0500 5014
Option “integrated Webserver"            Z500 5003
Option “consumption report" statistics, daily/weekly/monthly report            Z500 5004
"Option “quick measurement with 10 ms sampling rate" for analogue sensors,
max/min value storage per second"            Z500 5005
"Option “mathematics calculat. function" for 4 freely selectable “virtual" channels,
(mathematical functions: addition, subtraction, division, multiplication)"            Z500 5008
Option: "Totalizer function for analogue signals"            Z500 5009
            
software:            
"CS Soft Basic for DS 500 data evaluation in graphic and table form
reading out of the measured data of one DS 500 via USB or Ethernet"            0554 7040
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations            0554 7050
GSM module for data transfer via the GSM network ( network)            
            
connection cable:            
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 5 m            0553 0501 
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 10 m            0553 0502
Connection cable for VA/FA series on instruments,ODU / M 12, 5 m            0553 0503
Extension cable for instruments,ODU / ODU, 10 m            0553 0504
"Connection cable for current/effective power meter to
DS 500 , 5 m"            0553 0506
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0111 (for VA/FA sensors) from DS 300 to DS 500             0553 0507
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0110 (for analogue) from DS 300 to DS 500             0553 0508
Mounted Odu plug for connection on instruments            Z604 0104
Case for all sensors (dimensions: 500 x 360 x 120 mm)            0554 6006
            Order no.
"VA 400 consumption sensor, max.version (185 m/s), 
sensor length 220 mm including 5 m connection cable to DS 500 "            0695 1122 
VA 400 consumption sensor, high speed version (224 m/s), sensor length 220 mm, including 5 m connection cable to DS 500             0695 1123
Sensor length 120 mm            ZSL 0120
Sensor length 160 mm            ZSL 0160
Sensor length 220 mm            ZSL 0220
Sensor length 300 mm            ZSL 0300
Sensor length 400 mm            ZSL 0400
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease             3200 0010
special cleaning              0699 4005
5 point precision calibration with ISO certificate             3200 0001
Real gas calibration              3200 0015
Real gas calibration for mixed gases            
            Order no.
Consumption counter VA 420 0.8... 90 l/min (R1/4" DN 8)            0695 0420
Consumption counter VA 420 0.2... 90 m3/h (R1/2" DN 15)            0695 0421
Consumption counter VA 420 0.3... 170 m3/h (R3/4" DN 20)            0695 0422
Consumption counter VA 420 0.5... 290 m3/h (R1" DN 25)            0695 0423
Consumption counter VA 420 0.7... 480 m3/h (R11/4" DN 32)            0695 0426
Consumption counter VA 420 1.0... 550 m3/h (R11/2" DN 40)            0695 0424
Consumption counter VA 420 2.0... 900 m3/h (R2" DN 50)            0695 0425
            Order no.
oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane            
            Order no.
"FA 410 dew point sensor for instruments, -80…+20°Ctd
incl. measuring chamber, 5 m cable and perforated cap"            0699 1411
"FA 415 dew point sensor for instruments, -20...50°Ctd 
incl. measuring chamber and 5 m connection cable and perforated cap"            0699 1415
            
Extension cable for instruments,ODU / ODU, 10 m            0553 0504
            Order no.
5 point precision calibration for consumption sensors including ISO certificate            3200 0001
Precision calibration at -40 °Ctd including ISO certificate            0699 3396
            Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale            0694 1886
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale            0694 0356
Standard pressure sensor CS 40, 0...40 bar, ± 0,5 % accuracy of full scale            0694 3930
Standard pressure sensor CS 1,6 absolut, 0...1,6 bar abs.,± 1 % accuracy of full scale            0694 3551
Standard pressure sensor CS 1,6 absolut, 0...1,6 bar abs.,± 0,5 % accuracy of full scale            0694 3550
Standard pressure sensor CS 100, 0...100 bar, ± 1 % accuracy of full scale            0694 3557
Standard pressure sensor CS 250, 0...250 bar, ± 1 % accuracy of full scale            0694 3558
Standard pressure sensor CS 400, 0...400 bar, ± 1 % accuracy of full scale            0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0,5 % accuracy of full scale            0694 3553
Precision pressure sensor CS 0,6 accuracy < 0.5 %            0694 3549
"Precision differential pressure sensor CS, 0...400 mbar, differential pressure,
accuracy 0.0075 % of full scale, static pressure max. 40 bar."            0694 3560
Pressure calibration certificate, 5 calibration points within the measuring range            3200 0004
            Order no.
"Bendable temperature probe Pt100 Class B, length 300 mm ? 3 mm, -70…+500°C,
2 m probe connection cable glass fibre/stainless steel with ODU plug 8 pole for instruments"            0604 0106
"Screw-in temperature probe Pt 100, Class A, length 300 mm, ? 6 mm,
with measuring transducer 4...20 mA = 50...+500°C (2-wire-technology)"            0693 0002
"Temperature probe cable Pt 100, Class A, length 300 mm, ? 6 mm,
-50...+180°C, 5 m probe connection cable with open ends"            0604 0102
"Temperature probe cable Pt 100, Class A, length 150 mm, ? 6 mm,
-50...+180°C, 5 m probe connection cable with open ends"            0604 0100
"Miniature cable temperature sensor Pt 100, Class A, length 25 mm,
? 4 mm, -50...+180°C, 5 m connection cable"            0604 0105
Indoor/outdoor temperature probe -50...+100°C            0604 0101
Indoor/outdoor temperature probe -50...+100°C with meas. transducer 4 to 20 mA = -50 to 100 °C ( 2-wire technology)            0693 0001
Clamp screwing 6 mm, G1/2", PTFE clamping, pressure-tight up to 6 bar            0554 6003
Clamp screwing 6 mm, G1/2", VA-clamping, pressure-tight up to 10 bar            0554 6004
Temperature calibration certificate, 2 calibration points            0520 0180
            Order no.
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 5 m            0553 0501 
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 10 m            0553 0502
Extension cable for instruments,ODU / ODU, 10 m            0553 0504
Clamp-on ammeter 0…400 A TRMS incl. 5 m connection cable            0554 0508
Clamp-on ammeter 0...1000 A TRMS incl. 5 m connection cable            0554 0511
Calibration certificate for clamp-on ammeter            0554 3333
            Order no.
CS PM 532            
Current / effective power meter up to 32 A            0554 5340
CS PM 600 current/effective power meter up to 100 A            0554 5341
CS PM 600 current/effective power meter up to 600 A            0554 5342
Connection cable for current/effective power meter to DS 500 , 5 m            0553 0506
            Order no.
"CS PM 710 CS PM 710 current/effective power meter for panel mountin
current transformer from 100 A to 2000 A connectible"            0554 5343
"Current transformer 100/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 21 mm)"            0554 5344 
"Current transformer 200/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 21 mm)"            0554 5345
"Current transformer 300/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 22 mm)"            0554 5346
"Current transformer 500/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 22 mm)"            0554 5347
"Current transformer 600/5 A connectible to current/effective power
meter for panel mounting (for cabels up to ? 22 mm)"            0554 5348
"Current transformer 1000/5 A connectible to current/effective power
meter for panel mounting (for current bar up to 65 x 32 mm)"            0554 5349 
"Current transformer 2000/5 A connectible to current/effective power
meter for panel mounting (for current bar up to 127 x 38 mm)"            0554 5350
            
connection cable:            
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 5 m            0553 0501 
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 10 m            0553 0502
            Order no.
Set DP 500 in a case - consisting of:            0600 0500
Portable dew point meter DP 500 for compressed air and gases            0560 0500
measuring chamber up to 16 bar            0699 4490
Diffusion-tight teflon hose 1 m with fast coupling at both ends            0554 0003
Power supply for DP 500/510            0554 0009
Control and calibration set 11.3% RH            0554 0002
Quick-lock coupling            0530 1101
Dry container for CS dew point sensors            0699 2500
Transportation case (small) for DP 500            0554 6500
            
Further options, not included in the set            
Portable dew point meter DP 500 for compressed air and gases (high pressure version up to 350 bar)            0560 0501
High-pressure measuring chamber up to 350 bar            0699 3590
Precision calibration at -40°Ctd with ISO certificate            0699 3396
Measuring chamber for atmospheric dew point            0699 3690
Measuring chamber for granulate dryers for minimum over pressure            0699 3490
Measuring chamber for respiratory air bottles up to 350 bar            0699 3790
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
Additional calibration point freely selectable in the range between -80…+20°Ctd            0700 7710
"CS Soft Basic for DS 500 - data evaluation in graphic and table form,
reading out of the measured data of one DP 500/510 via USB or Ethernet"            0554 7040
            Order no.
Set DP 510 in a case - consisting of:            0600 0510
Portable dew point meter DP 510 with one additional sensor input            0560 0510
measuring chamber up to 16 bar            0699 4490
Diffusion-tight teflon hose 1 m with fast coupling at both ends            0554 0003
Power supply for DP 500/510            0554 0009
Control and calibration set 11.3% RH            0554 0002
Quick-lock coupling            0530 1101
Dry container for CS dew point sensors            0699 2500
Transportation case (big) for DP 510 as well as further sensors            0554 6510
            
Further options, not included in the set            
Portable dew point meter DP 510 for compressed air and gases (high pressure version up to 350 bar)            0560 0512
High-pressure measuring chamber up to 350 bar            0699 3590
Precision calibration at -40°Ctd with ISO certificate            0699 3396
Measuring chamber for atmospheric dew point            0699 3690
Measuring chamber for granulate dryers for minimum over pressure            0699 3490
Measuring chamber for respiratory air bottles up to 350 bar            0699 3790
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
Additional calibration point freely selectable in the range between -80…+20°Ctd            0700 7710
Mounted Odu plug for connection on instruments            Z604 0104
"CS Soft Basic for DS 500 - data evaluation in graphic and table form,
reading out of the measured data of one DP 500/510 via USB or Ethernet"            0554 7040
            Order no.
"VA 400 consumption sensor, max.version (185 m/s), 
sensor length 220 mm including 5 m connection cable to DS 500 "            0695 1122 
VA 400 consumption sensor, high speed version (224 m/s), sensor length 220 mm, including 5 m connection cable to DS 500             0695 1123
            
Sensor length 120 mm            ZSL 0120
Sensor length 160 mm            ZSL 0160
Sensor length 220 mm            ZSL 0220
Sensor length 300 mm            ZSL 0300
Sensor length 400 mm            ZSL 0400
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease             3200 0010
special cleaning              0699 4005
5 point precision calibration with ISO certificate             3200 0001
Real gas calibration              3200 0015
Real gas calibration for mixed gases            
            Order no.
Consumption counter VA 420 0.8... 90 l/min (R1/4" DN 8)            0695 0420
Consumption counter VA 420 0.2... 90 m3/h (R1/2" DN 15)            0695 0421
Consumption counter VA 420 0.3... 170 m3/h (R3/4" DN 20)            0695 0422
Consumption counter VA 420 0.5... 290 m3/h (R1" DN 25)            0695 0423
Consumption counter VA 420 0.7... 480 m3/h (R11/4" DN 32)            0695 0426
Consumption counter VA 420 1.0... 550 m3/h (R11/2" DN 40)            0695 0424
Consumption counter VA 420 2.0... 900 m3/h (R2" DN 50)            0695 0425
            Order no.
"FA 410 dew point sensor for instruments, -80…+20°Ctd
ncl. measuring chamber, 5 m cable and perforated cap"            0699 1411
            Order no.
Connection cable for VA/FA series on instruments,ODU / M 12, 5 m            0553 0503
            Order no.
5 point precision calibration for consumption sensors including ISO certificate            3200 0001
Precision calibration at -40 °Ctd including ISO certificate            0699 3396
            Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale            0694 1886
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale            0694 0356
Standard pressure sensor CS 40, 0...40 bar, ± 0,5 % accuracy of full scale            0694 3930
Standard pressure sensor CS 1,6 absolut, 0...1,6 bar abs.,± 1 % accuracy of full scale            0694 3551
Standard pressure sensor CS 1,6 absolut, 0...1,6 bar abs.,± 0,5 % accuracy of full scale            0694 3550
Standard pressure sensor CS 100, 0...100 bar, ± 1 % accuracy of full scale            0694 3557
Standard pressure sensor CS 250, 0...250 bar, ± 1 % accuracy of full scale            0694 3558
Standard pressure sensor CS 400, 0...400 bar, ± 1 % accuracy of full scale            0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0,5 % accuracy of full scale            0694 3553
Precision pressure sensor CS 0,6 accuracy < 0.5 %            0694 3549
"Precision differential pressure sensor CS, 0...400 mbar, differential pressure,
accuracy 0.0075 % of full scale, static pressure max. 40 bar."            0694 3560
Pressure calibration certificate, 5 calibration points within the measuring range            3200 0004
            Order no.
"Bendable temperature probe Pt100 Class B, length 300 mm ? 3 mm, -70…+500°C,
2 m probe connection cable glass fibre/stainless steel with ODU plug 8 pole for instruments"            0604 0106
"Screw-in temperature probe Pt 100, Class A, length 300 mm, ? 6 mm,
with measuring transducer 4...20 mA = 50...+500°C (2-wire-technology)"            0693 0002
"Temperature probe cable Pt 100, Class A, length 300 mm, ? 6 mm,
-50...+180°C, 5 m probe connection cable with open ends"            0604 0102
"Temperature probe cable Pt 100, Class A, length 150 mm, ? 6 mm,
-50...+180°C, 5 m probe connection cable with open ends"            0604 0100
"Miniature cable temperature sensor Pt 100, Class A, length 25 mm,
? 4 mm, -50...+180°C, 5 m connection cable"            0604 0105
Indoor/outdoor temperature probe -50...+100°C            0604 0101
Indoor/outdoor temperature probe -50...+100°C with meas. transducer 4 to 20 mA = -50 to 100 °C ( 2-wire technology)            0693 0001
Clamp screwing 6 mm, G1/2", PTFE clamping, pressure-tight up to 6 bar            0554 6003
Clamp screwing 6 mm, G1/2", VA-clamping, pressure-tight up to 10 bar            0554 6004
Temperature calibration certificate, 2 calibration points            0520 0180
            Order no.
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 5 m            0553 0501 
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 10 m            0553 0502
Extension cable for instruments,ODU / ODU, 10 m            0553 0504
31    Clamp-on ammeter 0…400 A TRMS incl. 5 m connection cable            0554 0511
    Clamp-on ammeter 0...1000 A TRMS incl. 5 m connection cable            0554 0508
    Calibration certificate for clamp-on ammeter            0554 3333
CS PM 600 current/effective power meter up to 100 A                0554 5341
CS PM 600 current/effective power meter up to 600 A                0554 5342
            Order no.
FA 410 dew point sensor, -80°...20°Ctd incl. inspection certificate            0699 0410
FA 410 dew point sensor, -20°...50°Ctd incl. inspection certificate            0699 0412
            
Connection cables:            
Connection cable for VA/FA 400 5 m with M12 plug (power supply and analogue output)            0553 0104
Connection cable for VA/FA 400 10 m with M12 plug (power supply and analogue output)            0553 0105
Connection cable for VA/FA 400 20 m with M12 plug (power supply and analogue output)            0553 0120
Connection cable for VA/FA 400 5 m with 90° offset M12 plug            0553 0118
Connection cable for VA/FA 400 10 m with 90° offset M12 plug            0553 0119
Option: shielded cable, price per meter            Z553 0000
options:            
Option special version up to 350 bar            0699 4003
Option output in mg/m3, g/kg, oder %RH, special scaling 4...20 mA            0699 4004
measuring chambers:            
Standard measuring chamber up to 16 bar            0699 3390
Measuring Chamber for granulate dryers up to 250 mbar            0699 3490
High pressure measuring chamber up to 350 bar            0699 3590
Measuring chamber for atmospheric dew point            0699 3690
Measuring chamber for respiratory air bottles up to 350 bar (in case of pressures higher than 50 bar please order special version FA 400 / FA 410)            0699 3790
CS Service Software for FA/VA 400 sensors including PC connection set            0554 2005
including:            
Software adapter IF 100 including service software SFA 300 and CS Soft Professional            0554 1000
Cable with  M12-plug, 1.2 m with programming key FA/VA 400 serie            0554 0114
USB cable A-B for IF 100, 1,8 m            0554 0016
Power supply 24 VDC, 230 VAC for rech. battery load and long-term meas.            0554 0001
            
Netzteile:            
Mains unit in wall housing 100-240 V, 10 VA, 50-60 Hz/24 VDC, 0.35 A            0554 0108
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail            0699 3340
            
calibration and adjustment:            
Precision calibration at 3° Ctd including ISO certificate            3200 0003
Precision calibration at -40°C dew point with ISO certificate            0699 3396
Precision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable            0700 7710
Control and adjustment set 11.3 % RH for calibration            0554 0002
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
            Order no.
Dew point set DS 52 for adsorption dryers            0600 0420
consisting of:            
DS 52 LED digital process meter in wall housing            0500 0008
FA 410 dew point sensor (-80...20 °Ctd)            0699 0410
Standard measuring chamber up to 16 bar            0699 3390
Connection cable for VA/FA Series, 5 m with M12 plug            0553 0104
            
Options:            
Power supply 24 VDC (instead of 230 VAC)            Z500 0001
Power supply 110 VAC (instead of 230 VAC)            Z500 0002
Alarm unit mounted at wall housing            Z500 0003
Alarm unit for external mounting with 5 m cable            Z500 0004
Connecting cable version Switzerland - three-pole            Z553.CH
Connecting cable version USA - three-pole            Z553.USA
            
calibration and adjustment:            
Precision calibration at 3° Ctd including ISO certificate            3200 0003
Precision calibration at -40°C dew point with ISO certificate            0699 3396
Precision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable            0700 7710
Control and adjustment set 11.3 % RH for calibration            0554 0002
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
            Order no.
FA 415 dew point sensor, -20° to 50° Ctd            0699 0415
FA 415-4 dew point sensor -40...+30° Ctd              0699 4415
FA 415-6 dew point sensor -60...+30° Ctd              0699 6415
FA 415-2 dew point sensor -80...+20° Ctd             0699 2415
            
connection cables:            
Connection cable for VA/FA 400 5 m with M12 plug (power supply and analogue output)            0553 0104
Connection cable for VA/FA 400 10 m with M12 plug (power supply and analogue output)            0553 0105
Connection cable for VA/FA 400 20 m with M12 plug (power supply and analogue output)            0553 0120
Connection cable for VA/FA 400 5 m with 90° offset M12 plug            0553 0118
Connection cable for VA/FA 400 10 m with 90° offset M12 plug            0553 0119
Option: shielded cable, price per meter            Z553 0000
            
measuring chambers:            
Standard measuring chamber up to 16 bar            0699 3390
Measuring Chamber for granulate dryers up to 250 mbar            0699 3490
High pressure measuring chamber up to 350 bar            0699 3590
Measuring chamber for atmospheric dew point            0699 3690
Measuring chamber for respiratory air bottles up to 350 bar (in case of pressures higher than 50 bar please order special version FA 400 / FA 410)            0699 3790
            
CS Service software for FA/VA 400 incl. PC connection set, consisting of:            0554 2005
            
Software adapter IF 100 including service software SFA 300 and CS Soft Professional            0554 1000
Cable with  M12-plug, 1.2 m with programming key FA/VA 400 serie            0554 0114
USB cable A-B for IF 100, 1,8 m            0554 0016
Power supply 24 VDC, 230 VAC for rech. battery load and long-term meas.            0554 0001
            
power supply:            
Mains unit in wall housin 100-240 V, 10 VA, 50-60 Hz/24 VDC, 0.35 A            0554 0108
Mains unit on DIN rail 100-240 VAC / 24 VDC, 0.35 A            0699 3340
            
calibration and adjustment:            
Precision calibration at 3° Ctd including ISO certificate            3200 0003
Precision calibration at -40°C dew point with ISO certificate            0699 3396
Control and adjustment set 11.3 % RH for calibration            0554 0002
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
            Order no.
Dew point set DS 52 for refrigeration dryers            0600 0425
consisting of:            
DS 52 LED digital process meter in wall housing            0500 0008
FA 415 dew point sensor (-20...50 °Ctd)            0699 0415
Standard measuring chamber up to 16 bar            0699 3390
Connection cable for VA/FA Series, 5 m with M12 plug            0553 0104
            
Options:            
Power supply 24 VDC (instead of 230 VAC)            Z500 0001
Power uspply 110 VAC (instead of 230 VAC)            Z500 0002
Alarm unit mounted at wall housing            Z500 0003
Alarm unit for external mounting with 5 m lead            Z500 0004
Connecting cable version Switzerland - three-pole            Z553.CH
Connecting cable version USA - three-pole            Z553.USA
            
calibration and adjustment:            
Precision calibration at 3° Ctd including ISO certificate            3200 0003
Precision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable            0700 7710
Control and calibration set 11.3 % RH            0554 0002
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
            Order no.
Dew point set DS 400 for adsorption dryers (-80…+20°Ctd)            0601 0410
Dew point set DS 400 for refrigeration dryers (-20…+50°Ctd)            0601 0412
containing:            
Multifunction measuring instrument DS 400            0500 4000
FA 410 dew point sensor, -80°...20°Ctd incl. inspection certificate            0699 0410
FA 410 dew point sensor, -20°...50°Ctd incl. inspection certificate            0699 0412
Standard measuring chamber for compressed air up to 16 bar            0699 3390
Connection cable for VA/FA 400 5 m with M12 plug (power supply and analogue output)            0553 0104
            
Options:            
Integrated data logger for 100 million measured values            Z500 4002
Integrierte Ethernet- und RS 485 Schnittsle            Z500 4004
"2 additional sensor inputs for analogue sensors (pressure sensors, Z500.4001
temperature sensors and so on)"            Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus)            Z500 4003
Integrated Webserver DS400            Z500 4005
"CS Soft Basic - data evaluation in graphic and table form - reading out of
the measured data of DS 400 via USB or Ethernet"            0554 7040
Alarm device assembled            Z500 0003
Alarm device for external assembly incl. 5 m cable            Z500 0004
calibration certificates & adjustment            
Precision calibration at -40°C dew point with ISO certificate            0699 3396
Precision calibration at 3° Ctd including ISO certificate            3200 0003
            Order no.
product    "sensor-
input 1+2"    "sensor-
input 3+4"    
Multifunction measuring instrument DS400 - with 3.5“ graphic display  - easy operation with touch screen    digital     ----------    0500 4000 D
    digital    digital    0500 4000 DD
    digital    analog    0500 4000 DA
    analog     ----------    0500 4000 A
    analog    analog    0500 4000 AA
Option:            
Integrated data logger for 100 Mio. measured values            Z500 4002
Integrated Ethernet- and RS 485 interface            Z500 4004
Externes Gateway Profibus zum Anschluss an integrierte RS 485-Schnittsle            Z500 3008
Option Integrated Webserver DS400            Z500 4005
Option “mathematics calculat. function" for 4 freely selectable “virtual" channels            Z500 4007
Option "Totalizer function for analogue signals"            Z500 4006
            
available options:            
CS Soft Basic for DS 500 - data evaluation in graphic and table form, reading data of one DS 500 via USB or Ethernet            0554 7040
CS Soft Network - Database Client/Server Solution (up to 5 DS 500) - database (MySQL) to Server - data evaluation via Client-Software            0554 7041
CS Soft Network - Database Client/Server Solution (up to 10 DS 500) - data base (MySQL) to server - data evaluation via Client-Software            0554 7042
CS Soft Network - Database Client/Server Solution (up to 20 DS 500) - data base (MySQL) to server - data evaluation via Client-Software            0554 7043
CS Soft Network - Database Client/Server Solution (> 20 DS 500) - data base (MySQL) to server - data evaluation via Client-Software            0554 7044
Software Support / h            9999 9998
            Order no.
"VA 400 flow sensor in basic version:
Standard (92.7 m/s), sensor length 220 mm, without display"            0695 4001
Max. version (185 m/s)            Z695 4003
HighSpeed version (224 m/s)            Z695 4002
Sensor length 120 mm            ZSL 0120
Sensor length 160 mm            ZSL 0160
Sensor length 220 mm            ZSL 0220
Sensor length 300 mm            ZSL 0300
Sensor length 400 mm            ZSL 0400
            Order no.
"CS PM 710 current/effective power meter for panel mounting,
current transformer from 100 A to 2000 A connectible"            0554 5343
"Current transformer 100/5 A connectible to current/effective power
meter for panel mounting (for cabels up to x 21 mm)"            0554 5344 
"Current transformer 200/5 A connectible to current/effective power 0554 5345
meter for panel mounting (for cabels up to x 21 mm)"            0554 5345
"Current transformer 300/5 A connectible to current/effective power 0554 5346
meter for panel mounting (for cabels up to x 22 mm)"            0554 5346
"Current transformer 500/5 A connectible to current/effective power 0554 5347
meter for panel mounting (for cabels up to x 22 mm)"            0554 5347
"Current transformer 600/5 A connectible to current/effective power 0554 5348
meter for panel mounting (for cabels up to x 22 mm)"            0554 5348
"Current transformer 1000/5 A connectible to current/effective power 0554 5349
meter for panel mounting (for current bar up to 65 x 32 mm)"            0554 5349 
"Current transformer 2000/5 A connectible to current/effective power 0554 5350
meter for panel mounting (for current bar up to 127 x 38 mm)"            0554 5350
            
Connecting cables for CS PM 710:            
Connection cable to DS 400, 5 m, with open ends            0553 0108
Connection cable to DS 400, 10 m, with open ends            0553 0109
            Order no.
FA 400 dew point sensor for refrigeration dryers, -20...50°Ctd            0699 0401
FA 400 dew point sensor for adsorption dryers, -80...20°Ctd            0699 0402
FA 400 dew point sensor, replacement of FA 200, -60...30°Ctd            0699 0403
            
Options:            
Special version FA 400 up to 350 bar            0699 4003
Special scaling, output in ppm V/V, % RH, mg/m3            0699 4004
            
Connection cables:            
Connection cable for VA/FA 400 5 m with M12 plug (power supply and analogue output)            0553 0104
            
Connection cable for VA/FA 400 10 m with M12 plug (power supply and analogue output)            0553 0105
Connection cable for VA/FA 400 20 m with M12 plug (power supply and analogue output)            0553 0120
Connection cable for VA/FA 400 5 m with 90° offset M12 plug            0553 0118
Connection cable for VA/FA 400 10 m with 90° offset M12 plug            0553 0119
Option: shielded cable, price per meter            Z553 0000
Cable for alarm-/pulseoutput for dewpointsensors/consumption sensors with M12 plug, lenght 5 m            0553 0106
Cable for alarm-/pulseoutput for dewpointsensors/consumption sensors with M12 plug, lenght 10 m            0553 0107
Cable for alarm-/pulseoutput for dewpointsensors/consumption sensors with M12 plug, lenght 20 m            0553 0120
Cable FA 200 to FA 400 for feed-in and analogue output, 1 m            0553 0112
Cable FA 200 to FA 400 for alarm, 1 m             0553 0113
measuring chambers:            
Standard measuring chamber up to 16 bar            0699 3390
Measuring Chamber for granulate dryers up to 250 mbar            0699 3490
High pressure measuring chamber up to 350 bar            0699 3590
Measuring chamber for atmospheric dew point            0699 3690
Measuring chamber for respiratory air bottles up to 350 bar (in case of pressures higher than 50 bar please order special version FA 400 / FA 410)            0699 3790
            
CS Service software for FA/VA 400 incl. PC connection set, consisting of            0554 2005
            
Software adapter IF 100 including service software SFA 300 and CS Soft Professional            0554 1000
Cable with  M12-plug, 1.2 m with programming key FA/VA 400 serie            0554 0114
USB cable A-B for IF 100, 1,8 m            0554 0016
Power supply 24 VDC, 230 VAC for rech. battery load and long-term meas.            0554 0001
            
power supply:            
Mains unit in wall housing 100-240 V, 10 VA, 50-60 Hz/24 VDC, 0.35 A            0554 0108
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail            0699 3340
Mains unit 100-240 VAC/24 VDC, 0.35 A for Series VA/FA 400, 2 m cable            0554 0107
            
calibration certificates & adjustment            
Precision calibration at -40°C dew point with ISO certificate            0699 3396
Precision calibration at 3° Ctd including ISO certificate            3200 0003
Pra?zisionsabgleich im Bereich von -80...20 °Ctd, °Ctd Punkte frei wa?hlbarPrecision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable            0700 7710
Control and calibration set 11.3 % RH            0554 0002
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
            Order no.
FA 300-2 Ex pressure dew point meter (-80 to 20°Ctd)            0699 3070
            
Options:            
"Special scaling, Analogue output to other humidity parameters:
% RH g/m3, mg/m3, ppm V/V, g/kg"            0699 4004
Intrinsically safe power supply, safety barriers            0554 3071
High pressure measuring chamber up to 350 bar            0699 3590
            
Main units            
Mains unit in wall housing 100-240 V, 10 VA, 50-60 Hz/24 VDC, 0.35 A            0554 0108
Mains unit on DIN rail, 100-240 VAC / 24 VDC, 0.35 A            0699 3340
Mains unit 100-240 VAC/24 VDC, 0.35 A for Series VA/FA 400, 2 m cable            0554 0107
            Order no.
Standard measuring chamber up to 16 bar            0699 3390
Messkammer für Granulattrockner für minimalen überdruck (bis 250 mbar)            0699 3490
High pressure measuring chamber up to 350 bar            0699 3590
Measuring chamber for atmospheric dew point            0699 3690
Measuring chamber for respiratory air bottles up to 350 bar (in case of pressures higher than 50 bar please order special version FA 400 / FA 410)            0699 3790
            Order no.
Precision calibration at 3° Ctd including ISO certificate            3200 0003
Precision calibration at -40°C dew point with ISO certificate            0699 3396
Precision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable            0700 7710
Control and calibration set 11.3 % RH            0554 0002
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
            Order no.
Precision re-calibration at -40°C dew point with ISO certificate            0699 3333
Precision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable            0700 7710
            Order no.
VA 420 with integrated 1/4" measuring section Stainless steel 1.4301            0695 0420
VA 420 with integrated 1/2" measuring section Stainless steel 1.4301            0695 0421
VA 420 with integrated 3/4" measuring section Stainless steel 1.4301            0695 0422
VA 420 with integrated 1" measuring section Stainless steel 1.4301            0695 0423
VA 420 with integrated 11/4" measuring section Stainless steel 1.4301            0695 0426
VA 420 with integrated 11/2" measuring section Stainless steel 1.4301            0695 0424
VA 420 with integrated 2" measuring section Stainless steel 1.4301            0695 0425
VA 420 with integrated 1/4" measuring section Stainless steel 1.4404            0695 1420
VA 420 with integrated 1/2" measuring section Stainless steel 1.4404            0695 1421
VA 420 with integrated 3/4" measuring section Stainless steel 1.4404            0695 1422
VA 420 with integrated 1" measuring section Stainless steel 1.4404            0695 1423
VA 420 with integrated 11/4" measuring section Stainless steel 1.4404            0695 1426
VA 420 with integrated 11/2" measuring section Stainless steel 1.4404            0695 1424
VA 420 with integrated 2" measuring section Stainless steel 1.4404            0695 1425
            
Options:            
High-pressure version PN 40            Z695 0411
Special measuring range VA 420 according to customer’s requirements            Z695 4006
            
Connection cables:            
Connection cable 5 m (power supply, analogue output)            0553 0104
Connection cable 10 m (power supply, analogue output)            0553 0105
Connection cable 20 m (power supply, analogue output)            0553 0120
Pulse cable for consumption sensors with M12 plug, length 5 m            0553 0106
Pulse cable for consumption sensors with M12 plug, length 10 m            0553 0107
Pulse cable for consumption sensors with M12 plug, length 20 m            0553 0120
            
Closing cap for meas. section VA 420 (Material: Aluminium)            0190 0001
Closing cap for meas. section VA 420 (Material: Stainless steel 1.4404)            0190 0002
            
CS Service Software for FA/VA 400 sensors            0554 2005
incl. PC connection set, contains:            
Software adapter IF 100 including service software SFA 300 and CS Soft Professional            0554 1000
Cable with  M12-plug, 1.2 m with programming key FA/VA 400 serie            0554 0114
USB cable A-B for IF 100, 1,8 m            0554 0016
Power supply 24 VDC, 230 VAC for rech. battery load and long-term meas.            0554 0001
            
power supply:            
Mains unit in wall housing 100-240 V, 10 VA, 50-60 Hz/24 VDC, 0.35 A            0554 0108
            
Mains unit 100-240 VAC/24 VDC, 0.35 A for Series VA/FA 400, 2 m cable            0554 0107
            
calibration certificates & adjustment            
5 point precision calibration with ISO certificate            3200 0001
Real gas calibration            3200 0015
Special version oxygen measurement, oil- and fat free            3200 0010
Option oil- and fatfree            0699 4005
Real gas calibration            3200 0015
Real gas calibration for mixed gases            
            
Consumption measurement with VA 400/VA 420 of other gases (except compressed air) possible for:            
oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane            
            Order no.
VA 420 with integrated DN 15 measuring section with weld neck flange            0695 2421
VA 420 with integrated DN 20 measuring section with weld neck flange            0695 2422 
VA 420 with integrated DN 25 measuring section with weld neck flange            0695 2423
VA 420 with integrated DN 32 measuring section with weld neck flange            0695 2426
VA 420 with integrated DN 40 measuring section with weld neck flange            0695 2424
VA 420 with integrated DN 50 measuring section with weld neck flange            0695 2425
            
Options:            
High-pressure version PN 40            Z695 0411
Special measuring range VA 420 according to customer’s requirements            Z695 4006
calibration certificates & adjustment            
5 point precision calibration of new instrument with ISO certificate            3200 0001
Real gas calibration            3200 0015
Special version oxygen measurement, oil- and fat free            3200 0010
Option oil- and fatfree            0699 4005
Real gas calibration            3200 0015
Real gas calibration for mixed gases            
            
Consumption measurement with VA 400/VA 420 of other gases (except compressed air) possible for:            
oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane            
"VA 400 consumption sensor in basic version: 
Standard (92.7 m/s), probe length 220 mm, without display"            0695 4001
            
Options:            
Display            Z695 4000
Max. version (185 m/s)            Z695 4003
HighSpeed version (224 m/s)            Z695 4002
Probe length 120 mm            ZSL 0120
Probe length 160 mm            ZSL 0160
Probe length 220 mm            ZSL 0220
Probe length 300 mm            ZSL 0300
Probe length 400 mm            ZSL 0400
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease             3200 0010
special cleaning              0699 4005
            
connection cables:            
Connection cable, 5 m (power supply, analogue output, pulse output)            0553 0104
Connection cable, 10 m (power supply, analogue output, pulse output)            0553 0105
Connection cable, 20 m (power supply, analogue output, pulse output)            0553 0120
Pulse cable for consumption sensors with M12 plug, length 5 m            0553 0106
Pulse cable for consumption sensors with M12 plug, length 10 m            0553 0107
Pulse cable for consumption sensors with M12 plug, length 20 m            0553 0120
            
CS Service Software for FA/VA 400 sensors            0554 2005
incl. PC connection set, contains:            
Software adapter IF 100 including service software SFA 300 and CS Soft Professional            0554 1000
Cable with  M12-plug, 1.2 m with programming key FA/VA 400 serie            0554 0114
USB cable A-B for IF 100, 1,8 m            0554 0016
Power supply 24 VDC, 230 VAC for rech. battery load and long-term meas.            0554 0001
            
power supply:            
Mains unit in wall housing 100-240 V, 10 VA, 50-60 Hz/24 VDC, 0.35 A            0554 0108
Mains unit 100-240 VAC/24 VDC, 0.35 A for Series VA/FA 400, 2 m cable            0554 0107
calibration and adjustment:            
5 point precision calibration of new instrument with ISO certificate            3200 0001
Real gas calibration            3200 0015
Special version oxygen measurement, oil- and fat free            3200 0010
Option oil- and fatfree            0699 4005
Real gas calibration            3200 0015
Real gas calibration for mixed gases            
            Order no.
Flow station DS400 for installation in existing pipes            0601 4005
containing:            
Multifunction measuring instrument DS400 and VA 400 consumption probe without display incl. plug, standard version (92,7 m/s), length 220 mm            
            
Options for DS 400:            
Integrated data logger for 100 million measured values            Z500 4002
Integrated Ethernet and RS 485 interface            Z500 4004
2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors etc.)            Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus)            Z500 4003
Integrated webserver            Z500 4005
Option “mathematics calculat. function" for 4 freely selectable “virtual" channels            Z500 4007
Option "Totalizer function for analogue signals"            Z500 4006
            
Options for flow sensor VA 400:            
Max. version (185 m/s)            Z695 4003
High Speed version (224 m/s)            Z695 4002
Sensor length 120 mm            ZSL 0120
Sensor length 160 mm            ZSL 0160
Sensor length 220 mm            ZSL 0220
Sensor length 300 mm            ZSL 0300
Sensor length 400 mm            ZSL 0400
            
Further accessories:            
"CS Soft Basic - data evaluation in graphic an table form - reading out of
measured data of DS 400 via USB or Ethernet"            0554 7040
            
calibration and adjustment:            
5 point precision calibration including ISO certificate            3200 0001
            Order no.
product    "sensor-
input 1+2"    "sensor-
input 3+4"    
Multifunction measuring instrument DS400 - with 3.5“ graphic display – easy operation with touch screen    digital     ----------    0500 4000 D
    digital    digital    0500 4000 DD
    digital    analog     0500 4000 DA
    analog      ----------    0500 4000 A
    analog     analog     0500 4000 AA
Options:            
Integrated data logger for 100 Mio. measured values            Z500 4002
Integrated Ethernet- and RS 485 interface            Z500 4004
Externes Gateway Profibus zum Anschluss an integrierte RS 485-Schnittsle            Z500 3008
Integrated webserver            Z500 4005
"""Mathematics calculation function"" for 4 freely selectable channels,
(virtual channels): addition, subtraction, division, multiplication"            Z500 4007
"Totalizer function for analogue signals"            Z500 4006
            
Further accessories:            
"CS Soft Basic - data evaluation in graphic and table form - reading out of
the measured data of DS 400 via USB or Ethernet"            0554 7040
"CS Soft Network - Database Client/Server Solution (up to 5 DS 400) - 0554.7041
database (MySQL) to Server - data evaluation via Client-Software"            0554 7041
"CS Soft Network - Database Client/Server Solution (up to 10 DS 400) - 0554.7042
database (MySQL) to Server - data evaluation via Client-Software"            0554 7042
"CS Soft Network - Database Client/Server Solution (up to 20 DS 400) - 0554.7043
database (MySQL) to Server - data evaluation via Client-Software"            0554 7043
"CS Soft Network - Database Client/Server Solution (> 20 DS 400) - 0554.7044
database (MySQL) to Server - data evaluation via Client-Software"            0554 7044
Software Support / h            9999 9998
            Order no.
"VA 400 flow sensor in basic version:
Standard (92.7 m/s), sensor length 220 mm, without display"            0695 4001
Max. version (185 m/s)            Z695 4003
HighSpeed version (224 m/s)            Z695 4002
Sensor length 120 mm            ZSL 0120
Sensor length 160 mm            ZSL 0160
Sensor length 220 mm            ZSL 0220
Sensor length 300 mm            ZSL 0300
Sensor length 400 mm            ZSL 0400
            Order no.
Consumption counter VA 420 with integrated measuring section (R 1/4" DN 8)            0695 0420
Consumption counter VA 420 with integrated measuring section (R 1/2" DN 15)            0695 0421
Consumption counter VA 420 with integrated measuring section (R 3/4" DN 20)            0695 0422
Consumption counter VA 420 with integrated measuring section (R 1" DN 25)            0695 0423
Consumption counter VA 420 with integrated measuring section (R 11/4" DN 32)            0695 0426
Consumption counter VA 420 with integrated measuring section (R 11/2" DN 40)            0695 0424
Consumption counter VA 420 with integrated measuring section (R 2" DN 50)            0695 0425
            Order no.
FA 410 dew point sensor, -80°...20°Ctd including inspection certificate            0699 0410
FA 415 dew point sensor, -20°...50°Ctd including inspection certificate            0699 0415
Standard measuring chamber for compressed air up to 16 bar            0699 3390
            
Connection cables:            
Connection cable 5 m            0553 0104
Connection cable 10 m            0553 0105
            Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale            0694 1886
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale            0694 0356
Standard pressure sensor CS 40, 0...40 bar, ± 0,5 % accuracy of full scale            0694 3930
Standard pressure sensor CS 1,6 absolute, 0...1,6 bar abs.,± 1 % accuracy of full scale            0694 3551
Standard pressure sensor CS 1,6 absolute, 0...1,6 bar abs.,± 0,5 % accuracy of full scale            0694 3550
Standard pressure sensor CS 100, 0...100 bar, ± 1 % accuracy of full scale            0694 3557
Standard pressure sensor CS 250, 0...250 bar, ± 1 % accuracy of full scale            0694 3558
Standard pressure sensor CS 400, 0...400 bar, ± 1 % accuracy of full scale            0694 3559
"Precision differential pressure sensor CS 0…400 mbar differential pressure,
accuracy: 0.075 % of full scale, static pressure max. 40 bar"            0694 3560
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale            0694 3553
Precision pressure sensor CS 0,6 accuracy < 0.5 %            0694 3549
"Precision differential pressure sensor for further measuring, ranges, e. g.
0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar"            
            Order no.
"Screw-in temperature sensor Pt 100, Class A, length 300 mm, ? 6 mm, 
with measuring transducer 4...20 mA = 50...+500°C (2-wire-technology)"            0693 0002
"Temperature probe cable Pt 100, Class A, length 300 mm, ? 6 mm,
-50...+180°C, 5 m probe connection cable with open ends"            0604 0102
"Temperature probe cable Pt 100, Class A, length 150 mm, ? 6 mm,
-50...+180°C, 5 m probe connection cable with open ends"            0604 0100
Indoor/outdoor temperature probe -50...+100°C            0604 0101
Indoor/outdoor temperature probe -50...+100°C with meas. transducer 4 to 20 mA = -50 to 100 °C ( 2-wire technology)            0693 0001
Clamp screwing 6 mm, G1/2", PTFE clamping, pressure-tight up to 6 bar            0554 6003
Clamp screwing 6 mm, G1/2", VA clamping ring, pressure tight up to 10 bar            0554 6004
            Order no.
Connection cable 5 m            0553 0108
Connection cable 10 m            0553 0109
            Order no.
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends            0554 0510
Clamp-on ammeter 0...1000 A TRMS incl. 5 m connection cable with open ends            0554 0507
Calibration certificate for clamp-on ammeters, 5 calibration points             0554 3333
            Order no.
"CS PM 710 current/effective power meter for panel mounting,
current transformer from 100 A to 2000 A connectible"            0554 5343
"Current transformer 100/5 A connectible to current/effective power
meter for panel mounting (for cabels up to x 21 mm)"            0554 5344 
Current transformer 200/5 A connectible to current/effective power meter for panel mounting (for cabels up to ? 21 mm)            0554 5345
Current transformer 300/5 A connectible to current/effective power meter for panel mounting (for cabels up to ? 22 mm)            0554 5346
Current transformer 500/5 A connectible to current/effective power meter for panel mounting (for cabels up to ? 22 mm)            0554 5347
Current transformer 600/5 A connectible to current/effective power meter for panel mounting (for cabels up to ? 22 mm)            0554 5348
Current transformer 1000/5 A connectible to current/effective power meter for panel mounting (for current bar up to 65 x 32 mm)            0554 5349 
Current transformer 2000/5 A connectible to current/effective power meter for panel mounting (for current bar up to 127 x 38 mm)            0554 5350
            
connection cables for CS PM 710:            
Connection cable to DS 400, 5 m, with open ends            0553 0108
Connection cable to DS 400, 10 m, with open ends            0553 0109
            Order no.
Flow direction switch VA 409            0695 0409
Mains unit in wall housing            0554 0108
Connection cable VA/FA Series 400, 5 m with M12 plug            0553 0104
Connection cable VA/FA Series 400, 10 m with M12 plug            0553 0105
up to DN 65 (G2 1/2") with external thread, from DN 80 with weld neck flange according to DIN 2633            Order no.
            
measuring section G 1/4" 20.0 x 7.0 mm 180 mm            4000 0006
measuring section G 1/2" 21.3 x 2.6 mm 500 mm            4000 0015
measuring section G 3/4" 26.9 x 2.6 mm 600 mm            4000 0020
measuring section G 1" 33.7 x 3.2 mm 750 mm            4000 0025
measuring section G 1 1/4" 42.4 x 3.2 mm 900 mm            4000 0032
measuring section G 1 1/2" 48.3 x 3.2 mm 1000 mm            4000 0040
measuring section G 2" 60.3 x 3.6 mm 1250 mm            4000 0050
measuring section G 2 1/2" 76.1 x 3.6 mm 1500 mm            4000 0065
measuring section DN 80/88.9 88.9 x 2.0 mm 1850 mm            4000 0080
measuring section DN 100/114.3 114.3 x 2.0 mm 2104 mm            4000 0100
measuring section DN 125/139.7 139.7 x 3.0 mm 2860 mm            4000 0125
measruing section DN 150/168,3 168,3 x 3,0 mm 3110 mm            4000 0150
            
accessories:            
Drilling jig incl. drill (? 13 mm)            0530 1108
High-pressure protection recommended for installation from 10 to 50 bar            0530 1105
            Order no.
Spot drilling collar for pipe diameter 032 - 036 mm, length: 100 mm            0500 0446
Spot drilling collar for pipe diameter 036 - 040 mm, length: 100 mm            0500 0448
Spot drilling collar for pipe diameter 040 - 044 mm, length: 150 mm            0500 0449
Spot drilling collar for pipe diameter 044 - 051 mm, length: 200 mm            0500 0610
Spot drilling collar for pipe diameter 048 - 055 mm, length: 200 mm            0500 0611
Spot drilling collar for pipe diameter 052 - 059 mm, length: 200 mm            0500 0612
Spot drilling collar for pipe diameter 057 - 064 mm, length: 200 mm            0500 0613
Spot drilling collar for pipe diameter 063 - 070 mm, length: 200 mm            0500 0614
Spot drilling collar for pipe diameter 070 - 077 mm, length: 200 mm            0500 0615
Spot drilling collar for pipe diameter 075 - 083 mm, length: 200 mm            0500 0616
Spot drilling collar for pipe diameter 082 - 090 mm, length: 200 mm            0500 0617
Spot drilling collar for pipe diameter 087 - 097 mm, length: 200 mm            0500 0618
Spot drilling collar for pipe diameter 095 - 104 mm, length: 200 mm            0500 0619
Spot drilling collar for pipe diameter 102 - 112 mm, length: 200 mm            0500 0620
Spot drilling collar for pipe diameter 108 - 118 mm, length: 200 mm            0500 0621
Spot drilling collar for pipe diameter 118 - 128 mm, length: 200 mm            0500 0622
Spot drilling collar for pipe diameter 125 - 135 mm, length: 200 mm            0500 0623
Spot drilling collar for pipe diameter 133 - 144 mm, length: 200 mm            0500 0624
Spot drilling collar for pipe diameter 145 - 155 mm, length: 250 mm            0500 0625
Spot drilling collar for pipe diameter 151 - 161 mm, length: 250 mm            0500 0626
Spot drilling collar for pipe diameter 159 - 170 mm, length: 250 mm            0500 0627
Spot drilling collar for pipe diameter 168 - 180 mm, length: 250 mm            0500 0628
Spot drilling collar for pipe diameter 180 - 191 mm, length: 250 mm            0500 0629
Spot drilling collar for pipe diameter 193 - 203 mm, length: 300 mm            0500 0630
Spot drilling collar for pipe diameter 200 - 210 mm, length: 300 mm            0500 0631
Spot drilling collar for pipe diameter 209 - 220 mm, length: 300 mm            0500 0632
            Order no.
Thickness meter CS 0495, incl. case and calibration block            0560 0495
            Order no.
Re-calibration and 5 point precision alignment of consumption sensor with ISO certificate            0695 3333
Real gas calibration            3200 0015
Real gas calibration for mixed gases            
            
Stationary solution with particle counter PC 400 and DS 400:            Order no.
"PC 400 particle counter up to 0.1 μm for compressed air and gases
Measuring range: 0.1…5 μm displayed in 3 channels: 0.1…0.5 μm; 0.5…1 μm, 1…5 μm
Data transfer via Modbus interface (RS 485) incl. zero filter, pressure reducer incl. teflon hose (8mm) for connection to the compressed air, mains unit and power lead"            0699 0040
Connection cable 5 m            0553 0108
"DS 400 multifunction measuring instrument with graphic display and 0500 4000 D
touch screen operation"            0500 4000 D
Option: Integrated data logger for 100 million measured values            Z500 4002
Option: Integrated Ethernet and RS 485 interface            Z500 4004
"CS Soft Basic - data evaluation in graphic and table form -
reading out of the measured data of DS 500 via USB or Ethernet"            0554 7040
"PC 400 particle counter up to 0.3 μm for compressed air and gases
Measuring range: 0.3…5 μm displayed in 3 channels: 0.3…0.5 μm; 0.5…1 μm, 1…5 μm
Data transfer via Modbus interface (RS 485) incl. zero filter, pressure reducer incl. teflon hose (8mm) for connection to the compressed air, mains unit and power lead"            0699 0041 
calibration for PC 400 particle counter            3200 0040
Portable solution with particle counter PC 400 and DS 500 :            
"PC 400 particle counter up to 0.1 μm for compressed air and gases
Measuring range: 0.1…5 μm displayed in 3 channels: 0.1…0.5 μm; 0.5…1 μm, 1…5 μm
Data transfer via Modbus interface (RS 485) incl. zero filter, pressure reducer incl. teflon hose (8mm) for connection to the compressed air, mains unit and power lead"            0699 0040
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 5 m            0553 0501
Portable mounting plate with pedestal            0554 6016
Multifunction measuring instrument DS 500 , 4 sensor inputs            0500 5012
"CS Soft Basic - data evaluation in graphic and table form -
reading out of the measured data of DS 500 via USB or Ethernet"            0554 7040
"PC 400 particle counter up to 0.3 μm for compressed air and gases
Measuring range: 0.3…5 μm displayed in 3 channels: 0.3…0.5 μm; 0.5…1 μm, 1…5 μm
Data transfer via Modbus interface (RS 485) incl. zero filter, pressure reducer incl. teflon hose (8mm) for connection to the compressed air, mains unit and power lead"            0699 0041 
calibration for PC 400 particle counter            3200 0040
            
"Portable solution with particle counter PC 400 in a service case
and DS 500 :"            
"Portable PC 400 particle counter up to 0,1 μm for compressed air and gases
in a service case Measuring range: 0.1…5 μm displayed in 3 channels: 0.1…0.5 μm; 0.5…1 μm, 1…5 μm Data transver via Modbus interface (RS 485) incl. zero filter, pressure reducer incl. teflon hose (8mm) for connection to the compressed air, mains unit and power lead"            0699 0042
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 5 m            0553 0501
Multifunction measuring instrument DS 500 , 4 sensor inputs            0500 5012
"CS Soft Basic - data evaluation in graphic and table form -
reading out of the measured data of DS 500 via USB or Ethernet"            0554 7040
"Portable PC 400 particle counter up to 0,3 μm for compressed air and gases in a service case
Measuring range: 0.3…5 μm displayed in 3 channels: 0.3…0.5 μm; 0.5…1 μm, 1…5 μm
Data transfer via Modbus interface (RS 485) incl. zero filter, pressure reducer incl. teflon hose (8mm) for connection to the compressed air, mains unit and power lead"            0699 0043
calibration for PC 400 particle counter            3200 0040
            
Stationary solution with OIL-Check and DS 400:            
"OIL-Check - residual oil content measurement for vaporous residual oil content (DN20-DN40), 
3-16 bar, measuring range <0.01…5.000 mg/m3, including sampling probe (DN 20-DN40),
inspection certificate, 4…20 mA. analogue output. Please order measuring section for sampling separay"            0699 0060
OIL-Check measuring section for sampling (DN 20, 3/4"), 16 bar, stainless steel, outer diameter 26.9 mm, outer thread R3/4"            4000 2001
Ball valve G3/8" incl. connection fittings for installation between sampling probe and OIL-Check, cleaned oil- and grease-free            3300 0004
Connector plug for 4…20 mA analogue output            3300 0005
Connection cable 5 m            0553 0108
DS 400 multifunction meas. instrument with graphic display and touch screen operation            0500 4000 A
Option: Integrated data logger for 100 million measured values            Z500 4002
Option: Integrierte Ethernet- und RS 485-Schnittsle            Z500 4004
"CS Soft Basic - data evaluation in graphic and table form -
reading out of the measured data of DS 500 via USB or Ethernet"            0554 7040
OIL-Check versions for different pipe diameters:            
OIL-Check - residual oil content measurement for vaporous residual oil content (DN50-DN80), 3-16 bar, meas. range <0.01…5.000 mg/m3, including sampling probe (DN 50-DN80), inspection certificate, 4…20 mA analogue output. Please order meas. section for sampling separay.            0699 0061
OIL-Check - residual oil content measurement for vaporous residual oil content (>DN80), 3-16 bar, measuring range <0.01…5.000 mg/m3, incl. sampling probe (customer-specific length), insp. certificate, 4…20 mA analogue output. Please order meas. section for sampling separay            0699 0062
OIL-Check measuring section for sampling (DN 25, 1"), 16 bar, stainless steel, outer diameter 33.7 mm, R1"            4000 2002
OIL-Check measuring section for sampling (DN 32, 11/4"), 16 bar, stainless steel, outer diameter 42.4 mm, R11/4"            4000 2003
OIL-Check measuring section for sampling (DN 40, 11/2"), 16 bar, stainless steel, outer diameter 48.3 mm, R11/2"            4000 2004
OIL-Check measuring section for sampling (DN 50, 2"), 16 bar, stainless steel, outer diameter 60.3 mm, R2"            4000 2005
OIL-Check measuring section for sampling (DN 65, 21/2"), 16 bar, stainless steel, outer diameter 76.1 mm, R21/2"            4000 2006
OIL-Check measuring section for sampling (DN 80, 3"), 16 bar, stainless steel, outer diameter 88.9 mm, R3"            4000 2007
Stainless steel pipe 6x1 mm for horizontal installation, length max. 1000 mm including connection fittings            4000 2008
            
Stationary solution with OIL-Check, particle counter PC 400 and DS 500            
"OIL-Check - residual oil content measurement for vaporous residual oil content (DN20-DN40), 
3-16 bar, measuring range <0.01…5.000 mg/m3, including sampling probe (DN 20-DN40),
inspection certificate, 4…20 mA. analogue output. Please order measuring section for sampling separay"            0699 0060
OIL-Check measuring section for sampling (DN 20, 3/4"), 16 bar, stainless steel, outer diameter 26.9 mm, outer thread R3/4"            4000 2001
Ball valve G3/8" incl. connection fittings for installation between sampling probe and OIL-Check, cleaned oil- and grease-free            3300 0004
Connector plug for 4…20 mA analogue output            3300 0005
Connection cable 5 m            0553 0108
"PC 400 particle counter up to 0.1 μm for compressed air and gases
Measuring range: 0.1…5 μm displayed in 3 channels: 0.1…0.5 μm; 0.5…1 μm, 1…5 μm
Data transfer via Modbus interface (RS 485) incl. zero filter, pressure reducer incl. teflon hose (8mm) for connection to the compressed air, mains unit and power lead"            0699 0040
Connection cable 5 m            0553 0108
DS 500 - inligent chart recorder in basic version (4 sensor inputs)            0500 5000
"CS Soft Basic - data evaluation in graphic and table form -
reading out of the measured data of DS 500 via USB or Ethernet"            0554 7040
"OIL-Check versions for different pipe diameters:
Optionally available: dew point sensor, pressure sensor, flow sensor"            "Please see
above"
            
Portable solution with OIL-Check, particle counter PC 400 + DS 500 :            
"OIL-Check - residual oil content measurement for vaporous residual oil content (DN20-DN40), 
3-16 bar, measuring range <0.01…5.000 mg/m3, including sampling probe (DN 20-DN40),
inspection certificate, 4…20 mA. analogue output. Please order measuring section for sampling separay"            0699 0060
OIL-Check measuring section for sampling (DN 20, 3/4"), 16 bar, stainless steel, outer diameter 26.9 mm, outer thread R3/4"            4000 2001
transport case with wheels including mounting plate            0554 6015
Connector plug for 4…20 mA analogue output            3300 0005
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 5 m            0553 0501
"PC 400 particle counter up to 0.1 μm for compressed air and gases
Measuring range: 0.1…5 μm displayed in 3 channels: 0.1…0.5 μm; 0.5…1 μm, 1…5 μm
Data transfer via Modbus interface (RS 485) incl. zero filter, pressure reducer incl. teflon hose (8mm) for connection to the compressed air, mains unit and power lead"            0699 0040
Connection cable for pressure,temperature or external sensors on instruments, ODU / open ends, 5 m            0553 0501
Multifunction measuring instrument DS 500 , 4 sensor inputs            0500 5012
"CS Soft Basic - data evaluation in graphic and table form -
reading out of the measured data of DS 500 via USB or Ethernet"            0554 7040
"OIL-Check versions for different pipe diameters:
Optionally available: dew point sensor, pressure sensor, flow sensor"            "Please see
above"
            Order no.
Set LD 400            0601 0104
consisting of:            
LD 400 Sleak detector            0560 0104
Transport case            0554 0106
Sound-proof headset            0554 0104
Focus tube with focus tip            0530 0104
Battery charger            0554 0009
Acoustictrumpet            0530 0109
            Order no.
"DS 52 – digital process meter in wall housing, supply 230 VAC, 
sensor input for 0(4)...20 mA signal, 2 alarm relays"            0500 0008
            
Options:            
Supply 24 VDC instead of 230 VAC            Z500 0001
Supply 110 VAC instead 230 VAC            Z500 0002
Alarm unit mounted at wall housing            Z500 0003
Alarm unit for external mounting            Z500 0004
            
"DS 52 – all-in one set for pressure monitoring /alerting,
consisting of DS 52 LED display and pressure sensor 0...16 bar"            
"DS 52 – all-in one set for temperature monitoring /alerting,
consisting of DS 52 LED display and screw-in temperature probe -50...+500°C"            
            Order no.
"DS 51 – digital meter for panel mounting, supply 230 VAC,
sensor input for 0(4)...20 mA signal, 2 alarm relays"            0500 0006
Options:            
Supply 24 VDC instead of 230 VAC            Z500 0001
Supply 110 VAC instead of 230 VAC            Z500 0002
            Order no.
Set DP 300 consisting of:            0600 6000
Portable dew point meter DP300 up to 50 bar incl. rechargeable battery            0560 6000
measuring chamber up to 16 bar            0699 4490
Diffusion-tight teflon hose 1 m with fast coupling at both ends            0554 0003
Power supply 24 VDC, 230 VAC for rech. battery load and long-term meas.            0554 0001
Control and calibration set 11.3 % RH            0554 0002
Quick-lock coupling            0530 1101
Dry container for DP 300            0699 2500
Transport case            0554 6002
            
Portable dew point meter DP 300 up to 350 bar including rech. Battery            0560 6001
High-pressure measuring chamber up to 350 bar            0699 3590
Precision calibration at -40°Ctd with ISO certificate            0699 3396
Measuring chamber for atmospheric dew point            0699 3690
Measuring chamber for granulate dryers for minimum over pressure            0699 3490
Measuring chamber for respiratory air bottles up to 350 bar            0699 3790
Control and calibration set 33 % RH            0554 0004
Control and calibration set 75.3 % RH            0554 0005
            Order no.
Flow station DS 300 for installation into existing pipelines            0600 4005
consisting of:            
Multifunction measuring instrument DS 300            0500 3000
VA 400 consumption probe without display incl. plug, standard version (92,7 m/s), length 220 mm            0695 4001
Connection cable for VA/FA 400 5 m with M12 plug (power supply and analogue output)            0553 0104
Ready for plug in and parametrization of the flow station            0990 0010
            
DS 300 flow station for installation in existing pipes (stainless steel 1.4301) consisting of:            
Multifunction measuring instrument DS 300            0500 3000
VA 400 consumption probe without display incl. plug, standard version (92,7 m/s), length 220 mm            0695 4001
Connection cable for VA/FA 400 5 m with M12 plug (power supply and analogue output)            0553 0104
            
DN 15        up to 750        l/min            0601 0261
DN 20        up to 85          m3/h            0601 0262
DN 25        up to 140        m3/h            0601 0263
DN 32        up to 260        m3/h            0601 0264
DN 40        up to 360        m3/h            0601 0265
DN 50        up to 600        m3/h            0601 0266
DN 65        up to 1100      m3/h            0601 0267
DN 80        up to 1600      m3/h            0601 0268
DN 100      up to 2700      m3/h            0601 0269
DN 125      up to 4000      m3/h            0601 0270
DN 150      up to 5800      m3/h            0601 0271
            
options for DS 300 flow station:            
Integrated data logger for 1 million measured valueste            Z500 3001
Interface RS 485 up to 32 DS 300 connectable             Z500 3002
2 additional analogue inputs (mA, mV, Pt100, NiCr-Ni)            Z500 3003
Ethernet-terminal            Z500 3005
Gateway Profibus            Z500 3008
Gateway Ethernet            Z500 3009
Connecting cable version Switzerland - three-pole            Z553.CH
Connecting cable version USA - three-pole            Z553.US
            
Options for VA 400 consumption sensor:            
Max. version (185 m/s)            Z695 4003
High Speed Version (224 m/s)            Z695 4002
Sensor length 120 mm            ZSL 0120
Sensor length 160 mm            ZSL 0160
Sensor length 300 mm            ZSL 0300
Sensor length 400 mm            ZSL 0400
            
CS Soft Professional CSM-S software for data evaluation in graphic and table form with USB cable            0554 7011
Fivefold software licence for CS Soft Professional CSM-S (0554.7011)            0599 7011
Tenfold software licence for CS Soft Professional CSM-S (0554.7011)            0599 7012
            
calibration certificates VA 400:            
5 point precision calibration of new instrument with ISO certificate            3200 0001
Real gas calibration            3200 0015
Special version oxygen measurement, oil- and fat free            3200 0010
Option oil- and fatfree            0699 4005
Real gas calibration            3200 0015
Real gas calibration for mixed gases            on request
            Order no.
DS 300-P6 with data logger for 1 million measured values including 2 digital inputs and 4 analogue inputs            0500 3226
DS 300-P4 with data logger for 1 million measured values including 2 digital inputs and 2 analogue inputsr            0500 3225
Consumption probe VA 400, max. version including certificate 5 m cable with Odu-plug            0695 0122
FA 410, dew point sensor from -80 to 20 °Ctd including measuring chamber and 5m cable with Odu-plug for DS 300             0699 0411
Precision Pressure sensor CS16 accuracy < 0,5 % from 0…16 bar G1/4" adapter            0694 3555
Connection cable for sensors 5 m with Odu plug for DS 300             0553 0110
Clamp-on ammeter 0 to 400 A for DS 300 , 3 m cable, ODU plug             0554 0512
Clamp-on ammeter 0 to 1000 A 8-30VDC for DS 300 , 5 m cable, ODU plug             0554 0509
CS compressed air analysis software for leakage and cost calculation incl. CS Soft Professional            0599 2011
Case big for probes (500 x 410 x 480 mm)            0554 6006
            Order no.
Set LD 300 leak detector            0601 0103
containing:            
LD 300 leak detector            0560 0102
Ultrasonic sensor            0605 0001
Sound-proof headset            0554 0102
Focus tube with focus tip            0530 0101
Cable for ultrasonic sensor            0553 0101
Battery charger            0554 0001
Carrying case for LD 300            0554 0101
accessories:            
Ultrasonic tone generator            0554 0103
escope bar 3 x 120 cm            0530 0102
            Order no.
All-in-one set FA 300 for refrigerating dryers, consisting of:            0600 0414
FA 300-11 dew point sensor (-10...+50°Ctd)            0699 3011
All-in-one set FA 300 for adsorption dryers, consisting of:            0600 0418
FA 300-21 dew point sensor (-80...+20°Ctd)            0699 3021
            
containing:            
Multifunction measuring instrument DS 300            0500 3000
Standard measuring chamber up to 16 ba            0699 3390
everything ready for plug in              0990 0011
            Order no.
DS 52 LED process display in wall housing - digital sensor input (SDI)            0500 0007
FA 300-21 dew point sensor (-80...+20°Ctd)            0699 3021
Standard measuring chamber up to 16 bar            0699 3390
Connection cable for sensors 5 m with open ends            0553 0108
            Order no.
FA 300-11 dew point sensor (-10...+50°Ctd)            0699 3011
FA 300-12 dewpoint measuring instrument with two directional contacts (-10..+50°Ctd),  5 m cable            0699 3012
FA 300-13 dewpoint measuring instrument, display, two directional contacts (-10..+50°Ctd), 5 m cable            0699 3013
Set 1 FA 300-11 -10..50°C dew point  with measuring chamber and mains unit integrated in wall housing            0600 3011
Set 2 FA 300-12 -10..50°C dew point with measuring chamber and mains unit integrated in wall housing with alarm            0600 3012
Set 3 FA 300-13 -10..50°C dew point with measuring chamber, mains unit integrated in wall housing with 2 alarms            0600 3013
            Order no.
FA 300-21 dew point sensor (-80...+20°Ctd)            0699 3021
FA 300-22 dewpoint measuring instrument with two directional contacts (-80..+20°Ctd), 5 m cable            0699 3022
FA 300-23 dewpoint measuring instrument, display, two directional contacts (-80..+20°Ctd), 5 m cable            0699 3023
            
Set 4 FA 300-21 (-80..20°C) dew point with measuring chamber and mains unit integrated in wall housing            0600 3021
Set 5 FA 300-22 (-80..20°C) dew point with measuring chamber and mains unit integrated in wall housing            0600 3022
Set 6 FA 300-23 (-80..20°C) dew point with measuring chamber, mains unit integrated in wall housing with 2 alarms            0600 3023
            Order no.
Retrofit Set FA 300-11 for refrigeration dryers            0699 3101
Retrofit Set FA 300-21 for adsorption dryers            0699 3102
Retrofit Set FA 300-11 with additional alarm for refrigeration dryers            0699 3201
Retrofit Set FA 300-21 with additional alarm for adsorption dryers            0699 3202
            Order no.
2 potential-free switch contact ( 60 V/1A max. 30 W)            0699 4000
0..20 mA analogue output for basic instruments FA 300-11 / -21            0699 4001
Display incl. 2 potential-free switch contact ( 60 V/1A max. 30 W)            0699 5000
            
Special version up to 350 bar            0699 4003
Output in mg/m3, g/kg, or %RH, special scaling 4...20 mA            0699 4004
Separate LED display, 48 x 24 mm, 24 VDC            0699 1233
Separate LED display, 48 x 24 mm, 12 VDC            0699 1229
Transformer 100-240  V AC/24 V DC , 0,35 A on top-hat rail            0699 3340