化工儀器網
詳細介紹
瑞士TESA測高儀00730035_二維手動MICRO-HITE900測高儀 蘇州特約店
A. 主機 Machine
訂貨號 Order No. | 描述 Description | 規格和尺寸 Model and Size | ||
00730033 | TESA MICRO-HITE 350測高儀 TESA MICRO Hite 350 | 350 |
|
|
00730034 | TESA MICRO-HITE 600測高儀 TESA MICRO Hite 600 |
| 600 |
|
00730035 | TESA MICRO-HITE900 測高儀 TESA MICRO Hite 900 |
|
| 900 |
以上每臺測高儀包含下令組件(不含控制面板) Each set above consists of following components, without control panel | ||||
00730021 | TESA MICRO-HITE 測高儀主機一臺 1 TESA MICRO-Hite main instrument |
|
| |
00730022 | TESA MICRO-HITE測高儀主機一臺 1 TESA MICRO-Hite main instrument |
|
| |
00730023 | TESA MICRO-HITE 測高儀主機一臺 1 TESA MICRO-Hite main instrument |
|
| |
00760143 | 標準測頭安裝座一個 1 Standard probe insert holder | |||
00760227 | 測球直徑為5 mm的標準測頭一只 1 Standard probe insert with a 5 mm dia. ball tip | |||
00760150 | 名義尺寸為20.00 mm的校準件一個 1 Master piece with nominal size 20.00 mm | |||
00760142 | 已安裝就位的電子壓縮氣泵一個 1 Electric pump already mounted for generating the air cushion beneath the gauge base | |||
00760141 | 電池盒一個 1 Battery pack | |||
04761054 | 電源適配器一個, 110 ~ 240伏, 50 ~ 60 赫茲輸入 1 Mains adapter, 110 to 240 Vac/50 to 60 Hz | |||
04761055 | 帶歐式插頭的電源線一根 1 Cable EU for mains adapter | |||
00760151 | TESA MICRO-Hite測高儀外罩一個 1 Dust cover for TESA MICRO-Hite |
|
| |
00760152 | TESA MICRO-Hite測高儀外罩一個 1 Dust cover for TESA MICRO-Hite |
|
| |
00760153 | TESA MICRO-Hite測高儀外罩一個 1 Dust cover for TESA MICRO-Hite |
|
| |
B. 計算機系統和測量軟件Computer System and Measuring Software
訂貨號 Order No. | 描述 Description |
| 價格 Price |
00760163 | TESA《POWER PANEL》控制面板 TESA Control Panel 《POWER PANEL》 | XXX |
C. 用戶現場安裝 Installation at customer site
機器將由賣方專業工程師在用戶處現場安裝, 并按出廠驗收條件完成驗收. 用戶提供必要的輔助條件
The machine will be installed by a certified engineer from the seller and complete the inspection according to the seller’s specification.
D. 在安裝現場培訓 Training on customer site
機器的使用操作培訓將由賣方專業工程師在用戶現場主持, 培訓時間為1~1.5天. 買方的操作員應具備基本的計量基礎知識.
The operation training will be take on customer site with a period of one and half days, the operators from the buyer should have a basic knowledge on Metrology.
E. 質量保證 Warranty
自在買方完成驗收之日起, 買方提供12個月的保修期, 保修期滿后提供終身有償服務.
The seller provides 12 months of warranty since the date of inspection. Paid service will be provided for the long term.
I. 技術描述 Technical Description
· 主要特征 Key Features
TESA Micro Hite 具有自成一體的設計理念, 非常適合于一維和兩維的幾何坐標測量 – 內外長度, 高度,深度,階梯尺寸和距離.
自動搜索zui高和zui低點的功能及其對zui大zui小值及其差值的記憶能力使之成為圓形尺寸的測量有效工具.
外加TESA 1G-13(選加附件)則更能按照ISO1101標準測量垂直度, 直線度, 平行度和端跳.
此測高儀安裝在鍍鎳的堅固底座上, 底座上配有三個精密拋光支承, 氣浮可使測高儀在測量平臺上輕松移動.
金屬光柵尺帶有零位參考點, 測量頭安裝在滾珠軸承上, 驅動系統可鎖定并進行微調(需選加附件).
計算機誤差補償更提高了長度,直線度和垂直度的測量精度.
TESA Micro Hite is a self-contained design made to measure in 1 or 2 coordinate directions – For length measurements in the form of internal, external, height, depth, step and distance dimensions of geometric elements with flat, parallel or cylindrical surface.
Automatic capture of the culminating point on bores and shafts – Memory functions <max.>, <min.> and <max.-min.> in dynamic probing.
TESA 1G-13 digital probe, as an option, lets you also measure any deviation from perpendicularity, straightness and parallelism as well as runout errors with result output in conformance with ISO1101.
The instrument is mounted on a rugged nickel plated base with bottom face including three supporting points finely lapped. Air cushion usable for easy move of the height gauge accross the surface plate.
Incremental glass scale with reference point. Measuring head mounted on a ball-bearing. Drive system can be locked or tighten. Fine adjust can also be additionally mounted(available as an option).
Extremely accurate measuring of deviations from length, straightness and perpendicularity due to the automatic correction of the bias errors through CAA(Computer Aided Accuracy).
· 技術指標 Performance Specifications
Model/ 型號規格 | TESA MICRO-Hite | |||
350 | 600 | 900 | ||
測量范圍/ Measuring span | mm | 365 | 615 | 920 |
應用范圍/ Application range 配標準附件/ With standard accessory 配訂貨號00760057的測頭座/ With probe insert holder No. 00760057 配訂貨號S07001622的測頭座/ With probe insert holder No. S07001622 | mm
|
520
575
745 |
770
825
995 |
1075
1130
1300 |
zui大允許誤差(帶標準附件)/ Max. permissible error, with standard accessory | (2+3L)μm, (L單位為米/L in m) | |||
重復性(帶標準附件)/ Repeatability, with standard accessory | ±2s≤2μm | |||
運動速度/Displacement speed | 300 mm/s | |||
測量力/Measuring force | 1.6N | |||
機械垂直度/ Mechanical Perpendicularity | μm | <7 | <9 | <11 |
主機重量/ Net weights, without panel and battery pack | kg | 33 | 38 | 45 |
充電一次使用時間/ Life time of the rechargeable battery | 12小時/ 12 hours | |||
· 環境要求Required Specification
|
|
· TESA《POWER PANEL》控制面板測量功能/ TESA Control Panel 《POWER PANEL》Function of Control Panel
1) 主要特點/ Key Features:
內置一維和兩維幾何測量程序, 可完成各種常用幾何量測量, 也提供垂直度,直線度測量的可能性. 提供99個測量程序可完成64種幾何特征的測量. 可存儲2500個測量數據. 具有數據統計功能, 測量結果可通過內藏打印機或外接A4打印機輸出, PCMCIA記憶卡可存儲測量程序和數據以便重復使用. 操作者可對屏幕顯示進行多種控制和選擇.
With dedicated program for measuring in 1 and 2 coordinate direction with geometri combination of the measured values. Lets you also measure perpendicularity, straightness and squareness. Provides 99 workpiece oriented measurement cycle including 64 features with related limits of size, programmable. Memory capacity for 2500 measured values. Statistical value processing(SPC). Result output via the built-in matrix printer or in A4 format using an external unit. PCMCIA memory card reader enabling measurement cycles and result to be stored. Operator-controlled on-screen display.
2) 主要測量功能/ Main Measuring function
主要測量功能 Definition of display symbols | 描述 Description |
| 不考慮測頭直徑時的測量 Measurements without taking a gauge head constant into account |
| 考慮測頭直徑時的測量 Measurement taking a gauge head constant into account |
| “連續性顯示”測量模式 “Continuous Display” measuring mode |
| 上兩次測量的差值 Difference of the last two probing |
| 上兩次測量值的差值 Difference between the last two measured values |
| 選擇兩次觸測 Select double probing |
| 選擇單次觸測 Select single probing |
| 取消A和B基準 Cancellation of reference A and B |
| 予置功能 “PRESET” function |
| 將顯示的數值傳給內藏打印機或外設 Transfer the value on the main display to the internal printer or to a peripheral |
| 在儀器存儲器中存儲數據 Confirm the data in the instrument memory |
| 計量單位選擇 Choice of unit selection and number of decimals after the decimal point |
| 取消測量結果 Cancellation of the measuring results |
II. 選項 Option
訂貨號 Order No. | 圖例 Picture | 描述 Description |
00760140 |
| TESA 1G-13測頭組件 TESA IG-13 Probe Set |
包含下列/Consisting of: | ||
00760139 |
| 一個TESA 1G-13數字測頭 1 TESA IG-13 digital probe |
00760138 |
| 一個TESA 1G-13的附件 1 Attachment for TESA IG-13 |
其他附件/Other accessories： | ||
01960005 |
| 測量螺拴用的抬升尺 Lift lever for the measuring bolt |
03540501 |
| 10mm長的測頭座 10 mm long extension for probe insert |
04761047 |
| 1G-13和加強型控制面板的連接電纜(1米) Connecting cable IG-13/Power Panel plus M(1m) |
S07020086 |
| 的TESA MEMOTAST測頭 TESA MEMOTAST-special |
訂貨號 Order No. | 圖例 B.Picture | 描述 Description |
|
|
00760173 |
| C. 小套裝附件D. Partial set of accessories | · |
|
00760148 |
| E. 全套裝附件F. Full set of accessories |
| · |
以下附件帶塑料包裝/Supplied in a suited plastic case with the following components | ||||
00760061 |
| 直徑3mm的碳化鎢球頭測桿 1 Measuring insert with a 3 mm dia. Tungsten carbide ball tip | · | · |
00760060 |
| 直徑10mm的碳化鎢球頭測桿 1 Measuring insert with a 10 mm dia. Tungsten carbide ball tip
| · | · |
00760066 | 桶形碳化鎢測桿, 用于圓拄形孔測量和公制螺紋孔位置測量Measuring inserts with tungsten carbide, barrel-shaped measuring faces for cylindrical bores as well as for determining the position of metric (or similar) inside threads | 直徑為1mm的測頭(M3到M6螺紋) 1 insert with a 2,2 mm dia. (for M3÷M16) |
| · |
00760067 | 直徑為4,5mm的測頭(M6到M48螺紋) 1 insert with a 4,5 mm dia. (for M6÷M48) |
| · | |
00760068 | 直徑為9,7mm的測頭(M12到M150螺紋) 1 insert with a 9,7 mm dia. (for M12÷M150)
|
| · | |
00760074 | 圓盤形碳化鎢測頭,用于凹槽,狹縫測量 Measuring inserts with tungsten carbide disc tip for grooves, slots, centring shoulders etc. | E = 1 mm / 直徑4,5 mm的測頭 1 insert, E = 1 mm / 4,5 mm dia. |
| · |
00760075 | E = 2 mm / 直徑14 mm的測頭 1 insert, E = 2 mm / 14 mm dia. | · | · | |
00760076 | E = 3 mm / 直徑19 mm的測頭 1 insert, E = 3 mm / 19 mm dia. |
| · | |
00760082 |
| 直徑為2mm的圓拄形碳化鎢測頭 1 insert with a 2 mm dia. Cylindrical carbide measuring face |
| · |
00760096 |
| 測座,可安裝帶M1.4或M2.5螺紋的TESATAST測頭 1 Holder for TESATAST probe inserts having either a M1,4 or M2,5 thread
| · | · |
01860201 |
帶M1.4螺紋和硬質合金球頂的TESATAST測頭 TESATAST probe inserts with a carbide ball tip, M1,4 thread | 直徑為1mm的測頭 1 insert with a 1 mm dia. | · | · |
01860202 | 直徑為2mm的測頭 1 insert with a 2 mm dia. | · | · | |
01860203 | 直徑為3mm的測頭 1 insert with a 3 mm dia. | · | · | |
01860307 |
| 工具 1 Setting key | · | · |
00760093 |
| 10mm直徑碳化鎢測頭,12mm長不銹鋼測桿 1 Measuring insert with cylindrical measuring face ( 10 mm dia., 12 mm long). Stainless steel body, hardened. Tungsten carbide measuring face. | · | · |
00760086 |
| 測座,測量深度達110mm 1 Holder for meas. Depths up to 110 mm ( L = 75 mm) |
| · |
00760087 | 測座,測量深度達185mm 1 Holder for meas. Depths up to 185 mm ( L = 150 mm) |
| · | |
00760057 | 測座, 提高測量范圍 1 insert holder for extending the application range |
| · | |
00760094 |
| 不銹鋼測桿,一端為平面,另一端為球面 1 Measuring insert with a stainless steel pin, hardened with one flat and one spherical carbide measuring face. Interchangable pin. | · | · |
S07001622 |
| 測座, 提高測量范圍 Probe insert holder for extending the application range |
|
|
化工儀器網