13915418480
當前位置：> 供求商機> GDS-806C-數字存儲示波器
為了滿足現今主流數位示波器市場的需求GWInstek特別推出GDS-806C 60MHz彩色顯示器示波器。125k點的記錄長度、25GSa/s的等效取樣率讓GDS-806C在記憶體長度和取樣率之間取得了*的平衡，易用的樹型功能目錄，類似傳統類比示波器的操作面版設計，高級的觸發功能（包括脈波寬度pulse width、TV掃瞄線、事件/時間延遲）PC端介面提供RS-232、GPIB、USB、印表機等介面，這使GDS-806C可以滿足當前大部份波形測量以及儲存的應用需求。
GDS-800系列共有250/150/100/60MHz四種頻寬，并且提供彩色和黑白LCD顯示器做為不同的應用場合的選擇。
| FFT FUNCTION |
 |
| With the FFT function, the GDS-800 Series can easily transform the signal display from time domain into frequency domain. Most remarkably, the GDS-800 Series is able to display a signal in the time domain and frequency domain at the same time. The cursors under the FFT mode can indicate the frequency and voltage values as well as the relative values of △frequency and △voltage. All these measurement readings can be simultaneously shown in the display. |
| 25GSa/s ET SAMPLING RATE AND 125k MEMORY |
 |
| The GDS-806/810/820/840 Series, with superior sampling rate up to 25GSa/s, provide 40ps point to point resolution for displaying repetitive waveforms. With 125k points long memory, the GDS-800 Series vive higher or equal sampling rate and longer record length for the signals being observed. In general, under the same time base setting, the longer memory a DSO has, the higher sampling rate it performs. This is one of the reasons the GDS-800 Series can always give a better waveform display than oscilloscopes with short memory. |
| 12 DIVISION HORIZONTAL DISPLAY |
 |
| The on-screen menu of a DSO makes the operation easier, but it also limits the space for waveform display. The GDS-800 Series offers users with an alternative to view the waveform in 12 divisions by hiding the on-screen menu when not used. By simply pressing a button, the display becomes available for 12- division waveform. Press the button again, and the display goes back to normal. This is a very useful feature when expecting to view a longer portion of the signal under test. |
| FREQUENCY ADJUSTABLE PROBE CALIBRATION SIGNAL |
 |
| The probe calibration signal in the GDS-806/810 is frequency GDS-800 Series adjustable from1kHz to 100kHz in 1kHz step, and duty cycle adjustable from 5% to 95% in 5% step. The probe calibration signal is provided mainly for accuray running probe compensation, but is also adequate to be used as a signal source for education and basic testing purpose.（This function is only available in GDS-806/810 Series） |
| 15 AUTO MEASUREMENTS AND SIMULTANEOUS T/ V CURSORS |
 |
| The 15 Auto Measurement functions in the GDS-800 Series enable users to easily measure the most frequently tested parameters. The GDS-800 Series are able to display 10 auto measurement data on the screen for two channels at the same time. Users will be able to get all their measurements results at a glance. |
| ADVANCED TRIGGER FUNCTIONS |
 |
| The GDS-800 Series provides advanced trigger features such as TV line trigger, video trigger, pulse width trigger, event delay trigger and time delay trigger, which could only be found in a higher-end GDS-800 Series. The advanced trigger capability of the GDS-800 Series makes the waveform capture in a broad range of applications possible. |
| ON-SCREEN HELP MANUAL |
 |
| The On-Screen Help Manual allows users to get a real-time help whenever they need to know the details of any function key. Press the"Help" key first, then press any other function key on the front panel, the On-Screen Help contents for that specific function key will appear in the display. |
| AUTO SET-UP SEQUENCE |
 |
| The Auto Set-Up Sequence enables testing engineers to carry out ATE tests without complex software programming. After users program a sequence from the front panel, the GDS-800 Series starts performing the measurements step by step according to the sequence of front until completion. The ATE test cycle can be programmed to repeat for a number of time. |
| VERSATILE INTERFACE |
 |
| The GDS-800 Series provide various kinds of interface including RS-232C, GPIB, USB, and printer port. With a software made specially for USB communication, the GDS-800 Series enables users to view nearly synchronous waveform displays on both PC screen and the GDS-800 Series. |
| 顯示系統 | |
| 顯示器 | 彩色 （320 x 240）, 5.7 LCD |
| 顯示對比 | 可調整 |
| 波形顯示范圍 | 8 x 10 （ 12 ） 格 |
| 波形顯示模式 | 點, 向量, 累積 |
| 垂直系統 | |
| 頻寬 | 60MHz （ -3dB ） |
| 通道 | 2 |
| 垂直分辨率 | 8-Bit |
| 垂直靈敏度 | 2mV/div ~ 5V/div |
| 垂直準確度誤差 | ±3% |
| 上升時間 | ＜5.8ns |
| 垂直端輸入耦合 | 1MΩ±2%, ~ 18pF |
| 垂直端輸入阻抗 | AC , DC , Ground |
| 極性 | 標準&反向 |
| zui大輸入電壓 | 300V（ DC+AC peak ） , CATII |
| 波形處理 | CH1+CH2 , CH1-CH2 , FFT |
| 偏移范圍 | 2mV/div ~ 50mV/div：±0.5V ; 100mV/div ~ 500mV/div：±5V ; 1V/div ~ 5V/div：±50V |
| 頻寬限制 | 20MHz （-3dB） |
| 水平系統 | |
| 水平掃描范圍 | 1ns/div ~ 10s/div （1-2-5順序） ; Roll : 250ms/div ~ 10s/div |
| 量測顯示模式 | Main , Window , Window Zoom , Roll , X-Y |
| 水平準確度誤差 | ±0.01% |
| 水平延遲范圍 | 前置觸發 : zui大20div ; 后置觸發：1000div |
| 訊號獲取系統 | |
| 實時取樣率 | 每通道zui快取樣率100MS/s |
| 等效取樣率 | 每通道zui快等效取樣率25GS/s |
| 紀錄深度 | 125k/CH |
| 峰值偵測 | 10ns （ 500ns/div ~ 10s/div ） |
| 獲取模式 | 取樣、峰值偵測、平均 |
| 平均次數 | 可選擇 2.4.8.16.32.64.128.256 次 |
| 觸發系統 | |
| 觸發類型 | CH1 , CH2 , Line , Ext |
| 觸發模式 | Auto Level , Auto , Normal , Single , TV-Line , Time Delay , Event Delay , Edge , Pulse Width |
| 觸發耦合 | AC , DC , HF , LF , Noise Reject |
| 觸發靈敏度 | DC ~ 25MHz：0.5div or 5mV 25MHz ~ 60MHz：Approx. 1.5div or 15mV |
| X-Y 模式 | |
| X軸 / Y軸 輸入 | 信道 1 / 信道 2 |
| 相位移 | 100kHz 時 ±3° |
| 光標以及量測系統 | |
| 自動電壓量測 | Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin |
| 自動時間量測 | Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle , Edge , Pulse Width |
| 游標量測 | 兩光標間之電壓差異 （ΔV）；兩光標間之時間差異 （ΔT）；兩光標間之頻率差異（1/ΔT） |
| 頻率計數器 | |
| 讀值分辨率 | 6位數 |
| 范圍 | 交流耦合 , 自20Hz到zui大頻寬 ; 分辨率10Hz |
| 訊號種類 | 適用于所有可正常觸發之訊號 （脈波寬度觸發以及視頻觸發除外） |
| 調整測試棒用信號 | |
| 頻率范圍 | 1 kHz ~ 100kHz, 1kHz/STEP |
| 周期比范圍 | 5% ~ 95%, 5%/STEP |
| 外部觸發 | |
| 外部觸發電壓范圍 | ±15V |
| 外部觸發靈敏度 | DC ~ 25MHz：~50mV 25MHz ~ 60MHz：~100mV |
| 外部觸發端輸入阻抗 | 1MΩ±2%, ~ 18pF |
| 外部觸發端zui大輸入范圍 | 300V（ DC+ AC peak） , CATII |
| 控制面板功能 | |
| 自動設定 | " Autoset " 可自動調整垂直系統 , 水平系統以及觸發位準 |
| 儲存/呼叫 | 提供15組量測條件之儲存/呼叫功能 |
| 波形儲存/呼叫 | 提供2組波形之儲存/呼叫功能 |
| 界面 | |
| 標準接口 | RS-232C |
| 選購界面 Opt. 01 | GPIB （選購界面 Opt. 01與 Opt. 11只能二選一） |
| 選購界面 Opt. 11 | USB, Printer Port, Go/NoGo Output （選購界面 Opt. 01與 Opt. 11只能二選一） |
| 電源電壓 | |
| 交流 100V~240V, 47~63Hz | |
| 配件 | |
| 使用手冊 x1 電源線 x1 測試棒 x 2 | |
| 尺寸以及重量 | 310W x 142H x 245D （mm）, 約 4.1kg |
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
