化工儀器網>產品展廳>環境監測儀器>輻射測量?jī)x器>場強儀/電磁場強分析儀> HI3603 美國HOLADAY 電磁場強度測試儀
HI3603 美國HOLADAY 電磁場強度測試儀
- 公司名稱 北京恒遠安諾科技有限公司
- 品牌
- 型號
- 產地 13811366395，010-87951792-8008 田經理
- 廠商性質 經銷商
- 更新時間 2024/6/15 9:25:24
- 訪問次數 1055
聯系方式：錢經理13521412287 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
美國HOLADAY HI3603電磁場強度測試儀
詳細資料：
HI3603電磁場強度測試儀具有電磁場兩用探頭（單軸），數字顯示，圖表顯示，數據記錄，磁場單位可選擇（高斯，特斯拉，安培/米）和波形輸出功能。可選光隔離遠程輸出/控制或RS232光調制解調器用于遠方顯示或數據收集。標準配置有絕緣手柄電池，使用手冊和便攜箱。
HI3603電磁場強度測試儀主要功能介紹：
于檢測計算機和電視顯示器產生的電磁場
檢測方法遵循美國國家標準
電場測量范圍：2-300 kHz，1-2000V/m
磁場測量范圍：8-300kHz，1-2000mA/m
RX-DD-OO硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
RX-1600-O精密硬度計
|
| |||||||||
Measuring Range | 0 - 100 units | |||||||||
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) | |||||||||
Dimensions | 2.25" x 6.125"H | |||||||||
Weight | 6 oz. | |||||||||
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. | |||||||||
RX-1700-E硬度計產地：美國
|
|
Accuracy | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
RX-1000-D硬度計
|
|
AD-100-DO精密硬度計
|
|
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,O,DO) |
Dial Size | 50 mm Diameter |
Dimensions | 128 x 57 x30 mm |
Weight | 200 grams (7 ounces) |
Warranty | 1 year |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
X-DD-O硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
RX-DD-M硬度計產地：美國
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
RX-1600-A精密硬度計產地：美國
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
RX-DD-O硬度計產地：美國
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
RX-DD-M硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
AD-100-OO精密硬度計
產地：美國
|
|
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,O,DO) |
Dial Size | 50 mm Diameter |
Dimensions | 128 x 57 x30 mm |
Weight | 200 grams (7 ounces) |
Warranty | 1 year |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
RX-DD-DO硬度計產地：美國
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
|
|
RX-2100硬度計
|
|
RX-DD-C硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
-1600-A精密硬度計
|
|
AD-100-C精密硬度計
|
|
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,O,DO) |
Dial Size | 50 mm Diameter |
Dimensions | 128 x 57 x30 mm |
Weight | 200 grams (7 ounces) |
Warranty | 1 year |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
HPSD硬度計
Worldwide Standards | According to DIN 53505 ,ISO 7619, ISO 868 and ASTM D 2240 |
Display range | 0 - 100 Scale |
Scale diameter | 56 mm |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions | 50 x 50 x 110 mm (L x W x H) |
RX-1600-CF硬度計
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
HPSA-R20硬度計
Work Face Radius | HPSA-R20 - 20mm |
Indenter: | Cone 35°, 1.3 mm ? |
Typical applications: | Hardness of elastomers and rubber etc. |
Depth of indentation: | 0 - 2.5 mm |
Test pressure: | Approx. 12.5 N |
Measuring spring force: | 0.55 - 8.065 N |
Display range: | 0 - 100 Scale |
Scale diameter: | 56 mm |
Working face: | 16 mm ? = 2 cm2 |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions: | 50 x 50 x 110 mm (L x W x H) |
RX-DD-A數字硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
AD-100-D精密硬度
|
|
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,O,DO) |
Dial Size | 50 mm Diameter |
Dimensions | 128 x 57 x30 mm |
Weight | 200 grams (7 ounces) |
Warranty | 1 year |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
HPSA-R35硬度計地：美國
Work Face Radius | HPSA-R20 - 20mm |
Indenter: | Cone 35°, 1.3 mm ? |
Typical applications: | Hardness of elastomers and rubber etc. |
Depth of indentation: | 0 - 2.5 mm |
Test pressure: | Approx. 12.5 N |
Measuring spring force: | 0.55 - 8.065 N |
Display range: | 0 - 100 Scale |
Scale diameter: | 56 mm |
Working face: | 16 mm ? = 2 cm2 |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions: | 50 x 50 x 110 mm (L x W x H) |
RX-DD-D硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
RX-DD-OOO硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
HPSC硬度計產地：美國
Worldwide Standards | According to DIN 53505 ,ISO 7619, ISO 868 and ASTM D 2240 |
Display range | 0 - 100 Scale |
Scale diameter | 56 mm |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions | 50 x 50 x 110 mm (L x W x H) |
HPSDO硬度計
Worldwide Standards | According to DIN 53505 ,ISO 7619, ISO 868 and ASTM D 2240 |
Display range | 0 - 100 Scale |
Scale diameter | 56 mm |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions | 50 x 50 x 110 mm (L x W x H) |
X-A硬度計
Indication Range | 262 degree dial scale |
Minimum indication | 1 point (Accuracy : ±1 point) |
Pressure foot Dimensions | 44×18mm Rectangular |
Outer Dimensions | Approx. Width 57×Depth 30×Height 76 mm |
Mounting Thread | M6 P1 |
Weight | 200 grams |
RX-1600-RR精密硬度計
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
RX-1700-D硬度計產地：美國
|
|
Accuracy | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
RX-1700-DO硬度計產地：美國
|
|
Accuracy | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
RX-1600-M精密硬度計產地：美國
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
RX-DD-B硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
RX-1700-D硬度計產地：美國
|
|
Accuracy | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
RX-1700-DO硬度計產地：美國
|
|
Accuracy | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
RX-1600-E精密硬度計產地：美國
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
RX-1600-DO精密硬度計
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
RX-DD-CF硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
RX-DD-E硬度計
Resolution | 0.1 Units |
Dimensions | 2.25" x 6.125" |
Weight | 7.15 oz. |
Power Supply | (2) 3V CR-2450 Batteries |
Warranty | 1 year |
|
|
RX-1000-B硬度計v產地：美國
|
|
AD-100-A精密硬度計產地：美國
|
|
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,O,DO) |
Dial Size | 50 mm Diameter |
Dimensions | 128 x 57 x30 mm |
Weight | 200 grams (7 ounces) |
Warranty | 1 year |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
AD-100-C精密硬度計產地：美國
|
|
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,O,DO) |
Dial Size | 50 mm Diameter |
Dimensions | 128 x 57 x30 mm |
Weight | 200 grams (7 ounces) |
Warranty | 1 year |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
HPSD硬度計產地：美國
Worldwide Standards | According to DIN 53505 ,ISO 7619, ISO 868 and ASTM D 2240 |
Display range | 0 - 100 Scale |
Scale diameter | 56 mm |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions | 50 x 50 x 110 mm (L x W x H) |
RX-1600-CF硬度計
產地：美國
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
HPSA-R20硬度計地：美國
Work Face Radius | HPSA-R20 - 20mm |
Indenter: | Cone 35°, 1.3 mm ? |
Typical applications: | Hardness of elastomers and rubber etc. |
Depth of indentation: | 0 - 2.5 mm |
Test pressure: | Approx. 12.5 N |
Measuring spring force: | 0.55 - 8.065 N |
Display range: | 0 - 100 Scale |
Scale diameter: | 56 mm |
Working face: | 16 mm ? = 2 cm2 |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions: | 50 x 50 x 110 mm (L x W x H) |
RX-1600-O精密硬度計
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
RX-1700-E硬度計產地：美國
|
|
Accuracy | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
RX-1000-D硬度計產地：美國
|
|
HPSA硬度計產地：美國
Worldwide Standards | According to DIN 53505 ,ISO 7619, ISO 868 and ASTM D 2240 |
Display range | 0 - 100 Scale |
Scale diameter | 56 mm |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions | 50 x 50 x 110 mm (L x W x H) |
RX-1600-B精密硬度計產地：美國
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
RX-1600-D精密硬度計產地：美國
Measuring Range | 0 - 100 units |
Accuracy* | ±1 durometer unit (A,B,C,D,E,O,DO) |
Dimensions | 2.25" x 6.125"H |
Weight | 6 oz. |
* Note | per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. |
HP系列肖氏硬度計產地：美國Specifications
Worldwide Standards | According to DIN 53505 ,ISO 7619, ISO 868 and ASTM D 2240 |
Display range | 0 - 100 Scale |
Scale diameter | 56 mm |
Weight, net (gross): | approx. 300 g (500 g) |
Dimensions | 50 x 50 x 110 mm (L x W x H) |
全自動顯微/維氏硬度計Tukon 2100B產地：美國
序號 | 項目 | 參數 |
1 | 硬度標尺 | HV0.01-HV50 |
2 | 試驗力 | 10N力傳感器(10gf—1000gf) 500N力傳感器(300gf—50kgf) |
3 | 試驗力選擇 | 自動 |
4 | 試驗力精度 | ±1.5% ; <200g, ±1.0% ; >200g, |
5 | 加卸載方式 | 自動，閉環式傳感器控制系統 |
6 | 保持時間 | 0.1到999秒 |
7 | 標準符合 | ASTM E384&E92，ISO6507，9385，4546 |
8 | 加載速度 | 可調，用戶自定義 |
9 | Z軸 | 自動移動 移動速度：Max 500mm/分鐘；可微調 |
10 | 轉塔 | 5個位置，270°旋轉； 可安裝1個壓頭、4個物鏡，或2個壓頭，3個物鏡 |
11 | 試臺 | 自動XY試臺（ELT3配套使用） 尺寸：220×195 mm 行程：180×160 mm |
12 | 物鏡 | 10X，20X，50X |
13 | 總放大倍率 | 100X，200X，500X |
14 | 目鏡 | 帶數字編碼器10X目鏡 |
15 | 光學調節 | 視場光闌,孔徑光闌 |
16 | 光源 | 12V, 30W鹵素?zé)?/span> |
17 | 結果顯示 | 壓痕對角線長度,硬度值,硬度轉換值,載荷大小 |
18 | 顯示分辨率 | 0.1HV or HK; ≤1000 1.0HV or HK; ≥1000 |
19 | 內存 | 999測試值 |
20 | 數據輸出 | RS232,I/O，TTL信號 |
21 | 硬度標尺轉換 | 依照ASTM E140, ASTM A370 DIN 50150 |
22 | 數據統計 | zui高值,zui低值,范圍,平均值,標準差，有效測試數，無效測試數，公差范圍內測試數，超公差范圍測試數，低于公差范圍測試數，CP，CPK，柱狀圖等 |
23 | 測試高度 | 101 mm |
24 | 測試寬度 | 165 mm |
25 | 工作環境溫度 | 10到38攝氏度 |
26 | 工作環境濕度 | 10%到90% |
27 | 電源 | 220伏,50-60HZ |
28 | 功率 | 370瓦 |
29 | 尺寸 | 952/330/597mm |
30 | 重量 | 68kg |
, der-top-alt: 31.8750pt none rgb(255,255,255); mso-border-bottom-alt: 1.0000pt solid rgb(0,0,0)" vAlign=center width=281>
內存
999測試值
20
數據輸出
RS232,I/O，TTL信號
21
硬度標尺轉換
依照ASTM E140, ASTM A370 DIN 50150
22
數據統計
zui高值,zui低值,范圍,平均值,標準差，有效測試數，無效測試數，公差范圍內測試數，超公差范圍測試數，低于公差范圍測試數，CP，CPK，柱狀圖等
23
測試高度
101 mm
24
測試寬度
165 mm
25
工作環境溫度
10到38攝氏度
26
工作環境濕度
10%到90%
27
電源
220伏,50-60HZ
28
功率
370瓦
29
尺寸
952/330/597mm
30
重量
68kg
, der-top-alt: 31.8750pt none rgb(255,255,255); mso-border-bottom-alt: 1.0000pt solid rgb(0,0,0)" vAlign=center width=281>
內存
999測試值
20
數據輸出
RS232,I/O，TTL信號
21
硬度標尺轉換
依照ASTM E140, ASTM A370 DIN 50150
22
數據統計
zui高值,zui低值,范圍,平均值,標準差，有效測試數，無效測試數，公差范圍內測試數，超公差范圍測試數，低于公差范圍測試數，CP，CPK，柱狀圖等
23
測試高度
101 mm
24
測試寬度
165 mm
25
工作環境溫度
10到38攝氏度
26
工作環境濕度
10%到90%
27
電源
220伏,50-60HZ
28
功率
370瓦
29
尺寸
952/330/597mm
30
重量
68kg
Duramin-2顯微硬度計產地：丹麥主要特點：
優異的再現性
用戶友好的設計
獲得*的自動負載變換裝置
自動鏡頭轉塔（Duramin-2）
簡單的菜單式操作，可通過LCD觸摸顯示屏輸入與顯示數值（圖形或文本模式）。
高分辨率測量探針。zui小測量單位為0.01微米。
高精度機械調整臺，配備測微螺旋，實現x-y平面內的精確定位。
標準與快速測試模式
可進行系列測量和一次性測量
可進行不同硬度的換算（HR、HB、MPa等）
測量數據統計（zui大和zui小值、平均值、標準差及條形圖）
RS 232C接口及打印機端口
DuraScan維氏硬度計產地：丹麥儀器簡介：
快速、寬載荷、全自動的新款維氏硬度計！顯微硬度測試與宏觀硬度測試相結合，開創硬度測試新紀元！
創新點:
1.*的寬載荷范圍：10gf-10kgf
2.*的*加載技術，砝碼和閉環式傳感器加載 技術保證高精度，高重復性載荷
3.極快速測試過程
4.可選6-位自動轉塔臺
5.*的*聚焦技術保證對各種表面進行快速，自動聚焦
6.第二個全景攝像頭使得多點硬度測試更方便快捷
7.可自動進行CHD, Rht, Nht測試
8.可根據設定硬度極限值，使得測試循環自動停止
9.*的工作流程式操作軟件使得整個測試過程更方便快捷
10.使用多樣品測試軟件可對多個樣品進行快速自動測量
DuraJet洛氏硬度計產地：丹麥Duramin-1顯微硬度計產地：丹麥主要特點：
優異的再現性
用戶友好的設計
獲得*的自動負載變換裝置
自動鏡頭轉塔（Duramin-2）
簡單的菜單式操作，可通過LCD觸摸顯示屏輸入與顯示數值（圖形或文本模式）。
高分辨率測量探針。zui小測量單位為0.01微米。
高精度機械調整臺，配備測微螺旋，實現x-y平面內的精確定位。
標準與快速測試模式
可進行系列測量和一次性測量
可進行不同硬度的換算（HR、HB、MPa等）
測量數據統計（zui大和zui小值、平均值、標準差及條形圖）
RS 232C接口及打印機端口
Duramin-20顯微硬度計產地：丹麥主要特點：
Duramin-10和-20型
用戶界面設計明快簡潔、操作簡便。
采用人機工程學設計，可實現無疲勞操作。
模塊化結構
高度自動化
自動機械調整臺，再現性為1微米，分辨率為0.025微米。
壓痕自動定位與測量
操作人員可隨時進行互動干預
高再現性自動對焦功能（Duramin-20）
測量的再現性和精確性更高
測量日志編輯器配備格式化功能和公式分析程序
菜單式數據傳送功能，可將測試結果導出至Microsoft Excel
Duramin-5型
自動開始試驗/停止功能
再現性和準確性更高
計算機視頻接口
自動壓痕測量
10倍目鏡，內置雙線游絲
滲碳層厚度自動測量功能
自動三位轉塔
一鍵操作即可完成數據提交和數據記錄
負載——從10克至2千克共9個負載等級
可換算為HRC、HK和Brinell硬度
平面試樣、柱形試樣及球形試樣的表面校正
LCD觸屏控板
試驗結果圖形化處理功能
1600-OO-RSS標準表盤硬度計產地：美國
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
H-1000-A硬度計產地：美國The max-hold feature and small dial size make the H-1000 a good choice for hard to reach places, or for out of sight testing.
Features:
● Small face (1.675" Dia.)
● Easily fits into your pocket or clipped on belt
● Increments of 1 from 0-100
● One year warranty
● Furnished with a leather carrying case
● Conforms to ASTM D-2240 and NIST Traceable
H-1000-C硬度計產地：美國
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1600-C標準表盤硬度計產地：美國
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1700-O硬度計產地：美國Max-Hand 硬度計
現有ASTM類型：A, D, B, C, DO, E, and O
尺寸：2.25" x 6.125"H
重量：6 oz
特征：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
2000-E硬度計
產地：美國尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
低成本，人工操作
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1500-C硬度計產地：美國
marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB | |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1600-M標準表盤硬度計產地：美國標準標度硬度計；符合ASTM D-52240; 庫存型號A,D,B,C,DO,E,M,O,OO,OOO,OOO-S,RR和CF;
包括：NIST檢定證書，一年質保，攜帶式儀器箱。
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
大表盤
全盤360度掃描
1700-D硬度計產地：美國Max-Hand 硬度計
現有ASTM類型：A, D, B, C, DO, E, and O
尺寸：2.25" x 6.125"H
重量：6 oz
特征：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
H-1000-B硬度計● Small face (1.675" Dia.)
● Easily fits into your pocket or clipped on belt
● Increments of 1 from 0-100
● One year warranty
● Furnished with a leather carrying case
● Conforms to ASTM D-2240 and NIST Traceable
H-1000-O硬度計品牌： 泰亞賽福 型號：H1000
微型硬度計
目前擁有的型號：A,D,B,C,DO,E,和O
現有的 ASTM 型號: A, D, B, C, DO, E, and O
尺寸：1.675X5.6H
重量：3.85OZ
特點：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
小面積（直徑 1.675"）
易攜帶在口袋里和別在皮帶上
2000-SP硬度計產地：美國產地：美國
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
H-1000-DO硬度計產地：美國型號：H1000
微型硬度計
目前擁有的型號：A,D,B,C,DO,E,和O
現有的 ASTM 型號: A, D, B, C, DO, E, and O
尺寸：1.675X5.6H
重量：3.85OZ
特點：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
小面積（直徑 1.675"）
易攜帶在口袋里和別在皮帶上
1600-OOO標準表盤硬度計產地：美國標準標度硬度計；符合ASTM D-52240; 庫存型號A,D,B,C,DO,E,M,O,OO,OOO,OOO-S,RR和CF;
包括：NIST檢定證書，一年質保，攜帶式儀器箱。
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
大表盤
全盤360度掃描
2000-D硬度計2000-D硬度計尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
低成本，人工操作
- MS-1-A硬度計產地：美國Color-coded barrel adapters for D, B, C, DO, O, OO or OOO scales (sold separay)
- Includes NIST Calibration Certificate
- Conforms to ASTM D-2240
- Custom Made Carrying Case
- One Year Warranty
2000-B硬度計產地：美國
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1500-C硬度計產地：美國
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1600-M標準表盤硬度計產地：美國
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1600-SP標準表盤硬度計標準標度硬度計；符合ASTM D-52240; 庫存型號A,D,B,C,DO,E,M,O,OO,OOO,OOO-S,RR和CF;
包括：NIST檢定證書，一年質保，攜帶式儀器箱。
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
大表盤
全盤360度掃描
1700-C硬度計產地：美國
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
2000-C硬度計產地：美國型號：2000
Max-Hand 硬度計
現有 ASTM 型號: A, D, B, C, DO, E, and O
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
低成本，人工操作
1600-DO標準表盤硬度計產地：美國
|
1600-E標準表盤硬度計產地：美國包括：NIST檢定證書，一年質保，攜帶式儀器箱。
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
大表盤
全盤360度掃描
DD-4-D電子硬度計地：美國型號：Digital DD-4
電子硬度計
Available ASTM Types: A, D, B, C, DO, E, M, O, OO, OOO, and OOO-S
尺寸: 2.25" x 6.125"H
重量: 7.15 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
高低按鈕設置公差范圍
固態電路，LCD顯示
交流電源插座，含電池
快速反應
保持讀取直到重設
0.1解析度
標度盤可旋至270°
附件：軟件，打印
-1000-DO硬度計型號：H1000
微型硬度計
目前擁有的型號：A,D,B,C,DO,E,和O
現有的 ASTM 型號: A, D, B, C, DO, E, and O
尺寸：1.675X5.6H
重量：3.85OZ
特點：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
小面積（直徑 1.675"）
易攜帶在口袋里和別在皮帶上
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1600-D標準表盤硬度標準標度硬度計；符合ASTM D-52240; 庫存型號A,D,B,C,DO,E,M,O,OO,OOO,OOO-S,RR和CF;
包括：NIST檢定證書，一年質保，攜帶式儀器箱。
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
大表盤
全盤360度掃描
1600-O標準表盤硬度計
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
DD-3-C電子硬度計產地：美國號：Digital DD-3
電子硬度計
Available ASTM Types: A, D, B, C, DO, E, M, O, OO, OOO, and OOO-S
尺寸: 2.25" x 6.125"H
重量: 7.15 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
高低按鈕設置公差范圍
固態電路，LCD顯示
交流電源插座，含電池
快速反應
保持讀取直到重設
0.1解析度
標度盤可旋至270°
附件：軟件，打印
H-1000-SP硬度計型號：H1000
微型硬度計
目前擁有的型號：A,D,B,C,DO,E,和O
現有的 ASTM 型號: A, D, B, C, DO, E, and O
尺寸：1.675X5.6H
重量：3.85OZ
特點：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
小面積（直徑 1.675"）
易攜帶在口袋里和別在皮帶上
1700-E硬度計Max-Hand 硬度計
現有ASTM類型：A, D, B, C, DO, E, and O
尺寸：2.25" x 6.125"H
重量：6 oz
特征：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
2000-DO硬度計
產地：美國型號：2000
Max-Hand 硬度計
現有 ASTM 型號: A, D, B, C, DO, E, and O
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
低成本，人工操作
DD-3-A電子硬度計產地：美國型號：Digital DD-3
電子硬度計
Available ASTM Types: A, D, B, C, DO, E, M, O, OO, OOO, and OOO-S
尺寸: 2.25" x 6.125"H
重量: 7.15 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
高低按鈕設置公差范圍
固態電路，LCD顯示
交流電源插座，含電池
快速反應
保持讀取直到重設
0.1解析度
標度盤可旋至270°
附件：軟件，打印機
1600-SP標準表盤硬度計產地：美國標準標度硬度計；符合ASTM D-52240; 庫存型號A,D,B,C,DO,E,M,O,OO,OOO,OOO-S,RR和CF;
包括：NIST檢定證書，一年質保，攜帶式儀器箱。
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
大表盤
全盤360度掃描
- MS-1-A硬度計產地：美國Color-coded barrel adapters for D, B, C, DO, O, OO or OOO scales (sold separay)
- Includes NIST Calibration Certificate
- Conforms to ASTM D-2240
- Custom Made Carrying Case
- One Year Warranty
-1000-B硬度計產地：美國● Small face (1.675" Dia.)
● Easily fits into your pocket or clipped on belt
● Increments of 1 from 0-100
● One year warranty
● Furnished with a leather carrying case
● Conforms to ASTM D-2240 and NIST Traceable
H-1000-O硬度計型號：H1000
微型硬度計
目前擁有的型號：A,D,B,C,DO,E,和O
現有的 ASTM 型號: A, D, B, C, DO, E, and O
尺寸：1.675X5.6H
重量：3.85OZ
特點：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
小面積（直徑 1.675"）
易攜帶在口袋里和別在皮帶上
2000-B硬度計產地：美國型號：2000
Max-Hand 硬度計
現有 ASTM 型號: A, D, B, C, DO, E, and O
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
低成本，人工操作
Description:
1500-B硬度計產地：美國
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
1700-DO硬度計Max-Hand 硬度計
現有ASTM類型：A, D, B, C, DO, E, and O
尺寸：2.25" x 6.125"H
重量：6 oz
特征：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
2000-A硬度計產地：美國尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取zui大值和徐變
低成本，人工操作
DD-3-B電子硬度計型號：Digital DD-3
電子硬度計
Available ASTM Types: A, D, B, C, DO, E, M, O, OO, OOO, and OOO-S
尺寸: 2.25" x 6.125"H
重量: 7.15 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
高低按鈕設置公差范圍
固態電路，LCD顯示
交流電源插座，含電池
快速反應
保持讀取直到重設
0.1解析度
標度盤可旋至270°
附件：軟件，打印機
1600-A標準表盤硬度計標準標度硬度計；符合ASTM D-52240; 庫存型號A,D,B,C,DO,E,M,O,OO,OOO,OOO-S,RR和CF;
包括：NIST檢定證書，一年質保，攜帶式儀器箱。
尺寸: 2.25" x 6.125"H
重量: 6 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
大表盤
全盤360度掃描
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
DD-3-O電子硬度計產地：美國型號：Digital DD-3
電子硬度計
Available ASTM Types: A, D, B, C, DO, E, M, O, OO, OOO, and OOO-S
尺寸: 2.25" x 6.125"H
重量: 7.15 oz.
特征:
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
高低按鈕設置公差范圍
固態電路，LCD顯示
交流電源插座，含電池
快速反應
保持讀取直到重設
0.1解析度
標度盤可旋至270°
附件：軟件，打印機
1500-DO硬度計產地：美國
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
2100原廠輪胎硬度計產地：美國
DUROMETER TYPES | APPLICATIONS | INDENTOR SHAPE | MAIN SPRING |
TYPE A | Soft rubber, plastics, and elastomers, printer's rolls. | Flat Cone Point 35° Included Angle | 822 GM 1.81 LB. |
TYPE D | Hard rubber and plastics such as thermo plastics, flooring and bowling balls. | Sharp Cone Point 30° Included Angle | 4536 GM 10.0 LB. |
TYPE B | Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. | Sharp Cone Point 30° Included Angle | 822 GM 1.81 LB |
TYPE C | Medium hard elastomers and plastics. Also useful to avoid surface marks. | Flat Cone Point 35° Included Angle | 4536 GM 10.0 LB |
TYPE DO | Dense granular material, textile windings. | 3/32" Spherical | 4536 GM 10.0 LB |
TYPE O | Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. | 3/32" Spherical | 822 GM 1.81 LB |
TYPE OO | Light foams, sponge rubber gels, animal tissue. | 3/32" Spherical | 113 GM |
TYPE OOO | Ultra soft gels and sponge rubber. | 1/2" Spherical | 113 GM |
TYPE M | Materials as thin as .050" | Sharp Cone Point 30° Included Angle |
MS-1-E硬度計產地：美國MS-1-O硬度計
、RDC-1硬度計檢定儀
產地：美國1500-D硬度計MS-1-B硬度計MS-1-K硬度計產地：美國
1600橡膠硬度計
Features:
● Large dial
● Full 360° sweep
● Superior 1/2 point accuracy
● Custom made carrying case
● One year warranty
● Conforms to ASTM D-2240 and NIST Traceable
FT-327水果硬度計產地：意大利水果硬度計通過測量水果的硬度來判斷水果的成熟度。*使用zui廣泛、測量數據zui獲認可的水果硬度計，已然成為行業內研究與質量控制的標準。用途概述：水果硬度計是一種快速方便的測量水果硬度的儀器，水果硬度是普遍認同的衡量水果成熟度的指標。果實硬度計是種植業者*的用來確定水果采摘和上市時間的工具。適合于各種水果和蔬菜的測定.意大利 Fruit Test™系列硬度計通過將一個特定大小的探頭插入水果中，測定插入探頭所必需 的力，以力的讀數來表征合時的采摘時間。此外，此儀器還可以用來監測水果儲藏過程中軟化的情況。一般從水果 快成熟的前幾天開始測量，一直持續到采摘。測試儀可以手持也可以安裝在水果硬度計臺上,用于實驗室和田間的檢測。 適用對象：可用于蘋果、杏、梨、桃、李、柑橘、瓜、櫻桃、番茄、草莓、芒果、葡萄、橄欖等水果的測定。
FT-011軟水果硬度計產地：意大利水果硬度計通過測量水果的硬度來判斷水果的成熟度。果實硬度計是種植業者*的用來確定水果采摘和上市時間的工具。
測量范圍：0-5kg（0-12lb）
測量對象：桃，杏，李子，甜瓜，柑橘類，柿子
附件：2個金屬探頭，8mm和11mm；削皮刀
FT-02小水果硬度計產地：意大利水果硬度計通過測量水果的硬度來判斷水果的成熟度。果實硬度計是種植業者*的用來確定水果采摘和上市時間的工具。
測量范圍：0-1kg（0-2.2lb）
測量對象：櫻桃，葡萄，草莓，藍莓等
附件：1個金屬探頭，6mm；削皮刀
可選配件：
可單獨選購測量微小水果的小直徑探頭（可提供的直徑為Φ1mm，Φ1.5mm，Φ2mm，Φ2.5mm，Φ3mm），可任意選擇其中一種或者多種；水果硬度計臺（配合水果硬度計臺效果更好，測量更精準）
AT130硬度計產地：美國T STAND - THE MOST VERSATILE: DEPTH 220 MM HEIGHT 420 MM
(+ 100 + 300 + 500 ON REQUEST)
N STAND - CONVENTIONAL: DEPT 220 MM HEIGHT 215 MM
CAR STAND - : DEPTH 300 MM HEIGHT 750 MM
MUR STAND - WALL MOUNTING: DEPTH 300 MM HEIGHT 550 MM
ESATEST MTR硬度計
產地：瑞士
DYNATEST SC硬度計
應用領域： 鑄鍛行 業、大型零部件生產企業、產品檢驗
應用實例：
鑄鍛毛坯件
大型工件
材料的分選
在用件
性能特點
直接數顯
采用恒定的載荷，而不是動載荷
具有預載荷和測試載荷，滿足靜載試驗的基本要求
對被測表面的光潔度要求低
具有存儲、統計、打印及輸出功能
軟件的功能：標尺選擇，公差設定，語言選擇，統計，標準偏差、zui小可測量厚度和曲面硬度修正等
操作簡單，攜帶方便
具有自校準功能。
AT 300 DRT-M硬度計
AT200硬度計
T STAND - THE MOST VERSATILE: DEPTH 220 MM HEIGHT 420 MM
(+ 100 + 300 + 500 ON REQUEST)
N STAND - CONVENTIONAL: DEPT 220 MM HEIGHT 215 MM
CAR STAND - : DEPTH 300 MM HEIGHT 750 MM
MUR STAND - WALL MOUNTING: DEPTH 300 MM HEIGHT 550 mm
COMPUTEST SC硬度計產地：瑞士
高：75mm
深：60mm
重：9Kg
磁性支座：
用于板材或棒材工件（zui小直徑30mm），特別適用于圓柱體工件。
重量：3.5Kg
技術指標：
型號：COMPUTEST SC便攜式硬度計
工作原理：洛氏
讀數：數顯，液晶顯示屏80×30mm
工作載荷：49N(5Kp)
預載荷：11.8N(1.2Kp)
標尺：HRC 0―70
HRB 0―120
HB/30 80―700
N/mm2266―2180
Kg/ mm227―222
HV35―1080
深度0―100
（根據要求，可以選配其他標尺）
電子元件：16位
文件個數：8個
存儲容量：1000個值
可選擇的功能：標尺、公差、標定、語言選擇、加載時間等
輸出：RS232C
電源：100―230VAC，單相，50/60Hz（電池8小時）
溫度：0―50℃
重量：5.9Kg
尺寸：40×32×14cm
標準配置：
1個電池充電器
1個金剛石壓頭
3個標準硬度塊
2個平砧
1個V型砧板
1個50mm延長臂
1份操作手冊
可選附件：
軟件，用于數據統計
標尺HB10―HB5
打印機
打印電纜
工作臺
磁性支痤
TWIN硬度計
30硬度計產地：瑞士、
HANDY ESATEST硬度計
電阻法測量硬度（ERNST*）。
直接數顯。
壓痕極小，幾乎相當于無損硬度測試。
可測試模數1.5以上的齒輪以及微小空間內的硬度值。
一次測試可以給出各個載荷下的硬度。
具有自校準功能。
TWIN全自動硬度測試器
應用領域： 鑄鍛行 業、大型零部件生產企業、產品檢驗
應用實例：
鑄鍛毛坯件
大型工件
材料的分選
在用件
性能特點
直接數顯
采用恒定的載荷，而不是動載荷
具有預載荷和測試載荷，滿足靜載試驗的基本要求
對被測表面的光潔度要求低
具有存儲、統計、打印及輸出功能
軟件的功能：標尺選擇，公差設定，語言選擇，統計，標準偏差、zui小可測量厚度和曲面硬度修正等
操作簡單，攜帶方便
具有自校準功能。
技術參數：
原理：深度布氏測試原理
載荷 ： 初負荷： 7 kg (68.6N)
工作載荷： 125kg (1225 N)
壓頭：錐形的金剛石標準洛氏壓頭和硬質合金鋼球
讀數 : 數顯，液晶顯示屏 80×30mm
讀數分辨率： 0.1
標尺及測試范圍： HB/30 ， HRC ， 深度值
示值誤差：符合 ISO6508-2 （ 6506-2 ）及 GB230.2 （ 231.2 ）
示值重復性：符合 ISO6508-2 （ 6506-2 ）及 GB230.2 （ 231.2 ）
測試方向：任意
文件個數： 8 個
數據存儲：可存儲 1000 條測試數據
通訊：通過 RS232 接口，可以和計算機或打印機連接
溫度： 0 － 50 ℃ ，帶有自動溫度補償功能
測試裝置的重量（機械部分）： 1.9Kg
總重量： 11.2Kg
盒子的尺寸： 570x450x330
HANDYESATEST便攜式維氏硬度計
DYNATEST SC便攜式布氏硬度計
性能特點：
電阻法測量硬度（ERNST*）。
直接數顯。
壓痕極小，幾乎相當于無損硬度測試。
可測試模數1.5以上的齒輪以及微小空間內的硬度值。
一次測試可以給出各個載荷下的硬度。
具有自校準功能。
技術參數：
測試原理：維氏硬度原理
測試方法：電阻法
工作載荷: 靜態加載1―10 kg （9.8—98N）可通過鍵盤設定
讀數: 數顯，液晶顯示屏80×30mm
讀數分辨率：0.1
標尺及測試范圍：HV 100-1000 HRC 0-70 可根據要求選擇其他標尺
樣品表面光潔度：Ra0.8以上
示值誤差：符合ISO6507-2 (6508-2) 及GB/T4340.2(230.2)
測試方向： 任意
文件儲存：可同時存儲8個文件，共計1000個試驗值
軟件其它功能：標尺選擇、公差設定、自校準、語言選擇、測試載荷和zui小可測試厚度等
輸出：RS232可接打印機及電腦等
電源：?jiǎn)蜗?00－230VAC,50/60Hz 帶有接地。(充電電池8小時)
試驗環境：10－40℃，帶有自動溫度補償功能
機械部分重量：670g
總重：10Kg
箱體尺寸：400×320×140
COMPUTEST SC便攜式硬度計可獲得工件的zui小厚度
自動更正硬度曲線
設定公差范圍
連續存儲1000個試驗結果
直接得到一系列試驗結果的平均值
用5種語言打印試驗報告
試驗前–自動設定壓頭位置（壓頭（a）從壓頭套（b）中伸出）
預載荷位置–壓頭受到阻力（等于預載荷）后自動返回
工作載荷–施加工作載荷
測量–除去工作載荷，壓頭位移為（a）到（b）
COMPUTEST SC工作臺：
用于測量小型或不規則形狀的工件，工作臺帶有試驗所需的標準附件：
1個平砧
1個V型砧板
1個凸型銅砧
1個保護罩
技術參數：
高：75mm
深：60mm
重：9Kg
磁性支座：
用于板材或棒材工件（zui小直徑30mm），特別適用于圓柱體工件。
重量：3.5Kg
技術指標：
型號：COMPUTEST SC便攜式硬度計
工作原理：洛氏
讀數：數顯，液晶顯示屏80×30mm
工作載荷：49N(5Kp)
預載荷：11.8N(1.2Kp)
標尺：HRC 0―70
HRB 0―120
HB/30 80―700
N/mm2266―2180
Kg/ mm227―222
HV35―1080
深度0―100
（根據要求，可以選配其他標尺）
電子元件：16位
文件個數：8個
存儲容量：1000個值
可選擇的功能：標尺、公差、標定、語言選擇、加載時間等
輸出：RS232C
電源：100―230VAC，單相，50/60Hz（電池8小時）
溫度：0―50℃
重量：5.9Kg
尺寸：40×32×14cm
標準配置：
1個電池充電器
1個金剛石壓頭
3個標準硬度塊
2個平砧
1個V型砧板
1個50mm延長臂
1份操作手冊
可選附件：
軟件，用于數據統計
標尺HB10―HB5
打印機
打印電纜
工作臺
磁性支痤
PUTEST SC便攜式硬度計產地：瑞士COMPUTEST SC便攜式硬度計具有以下功能：
可獲得工件的zui小厚度
自動更正硬度曲線
設定公差范圍
連續存儲1000個試驗結果
直接得到一系列試驗結果的平均值
用5種語言打印試驗報告
試驗前–自動設定壓頭位置（壓頭（a）從壓頭套（b）中伸出）
預載荷位置–壓頭受到阻力（等于預載荷）后自動返回
工作載荷–施加工作載荷
測量–除去工作載荷，壓頭位移為（a）到（b）
COMPUTEST SC工作臺：
用于測量小型或不規則形狀的工件，工作臺帶有試驗所需的標準附件：
1個平砧
1個V型砧板
1個凸型銅砧
1個保護罩
技術參數：
高：75mm
深：60mm
重：9Kg
磁性支座：
用于板材或棒材工件（zui小直徑30mm），特別適用于圓柱體工件。
重量：3.5Kg
技術指標：
型號：COMPUTEST SC便攜式硬度計
工作原理：洛氏
讀數：數顯，液晶顯示屏80×30mm
工作載荷：49N(5Kp)
預載荷：11.8N(1.2Kp)
標尺：HRC 0―70
HRB 0―120
HB/30 80―700
N/mm2266―2180
Kg/ mm227―222
HV35―1080
深度0―100
（根據要求，可以選配其他標尺）
電子元件：16位
文件個數：8個
存儲容量：1000個值
可選擇的功能：標尺、公差、標定、語言選擇、加載時間等
輸出：RS232C
電源：100―230VAC，單相，50/60Hz（電池8小時）
溫度：0―50℃
重量：5.9Kg
尺寸：40×32×14cm
標準配置：
1個電池充電器
1個金剛石壓頭
3個標準硬度塊
2個平砧
1個V型砧板
1個50mm延長臂
1份操作手冊
可選附件：
軟件，用于數據統計
標尺HB10―HB5
打印機
打印電纜
工作臺
磁性支痤
HANDYESATEST便攜式維氏硬度計
能特點：
電阻法測量硬度（ERNST*）。
直接數顯。
壓痕極小，幾乎相當于無損硬度測試。
可測試模數1.5以上的齒輪以及微小空間內的硬度值。
一次測試可以給出各個載荷下的硬度。
具有自校準功能。
技術參數：
測試原理：維氏硬度原理
測試方法：電阻法
工作載荷: 靜態加載1―10 kg （9.8—98N）可通過鍵盤設定
讀數: 數顯，液晶顯示屏80×30mm
讀數分辨率：0.1
標尺及測試范圍：HV 100-1000 HRC 0-70 可根據要求選擇其他標尺
樣品表面光潔度：Ra0.8以上
示值誤差：符合ISO6507-2 (6508-2) 及GB/T4340.2(230.2)
測試方向： 任意
文件儲存：可同時存儲8個文件，共計1000個試驗值
軟件其它功能：標尺選擇、公差設定、自校準、語言選擇、測試載荷和zui小可測試厚度等
輸出：RS232可接打印機及電腦等
電源：?jiǎn)蜗?00－230VAC,50/60Hz 帶有接地。(充電電池8小時)
試驗環境：10－40℃，帶有自動溫度補償功能
機械部分重量：670g
總重：10Kg
箱體尺寸：400×320×140
如果您對本品感興趣請與我公司
北京恒遠安諾科技有限公司
聯 系 人：王志斌 （）
手 機：
： 2326210708
電子郵件： 2326210708
公司：
http://www.annovatek.com/
地址: 北京市朝陽區大郊亭中街2號院華騰3座10A
采購中心
化工儀器網